Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Seismic Performance of Concrete-Encased Cfst Piers: Experimental Study

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Experimental research on seismic performance of confined concrete filled tubular columns under cyclic loading

Experimental Behaviour of Box Concrete-Encased CFST Eccentrically Loaded Column

Experimental study on the seismic performance of concrete-filled steel tube columns with a multiple-chamber round-ended cross-section

Seismic Performance of Concrete-Encased CFST Piers: Analysis

Study on Seismic Performance Optimization of Assembly Concrete-Filled Steel Tubular (CFST)-Laced Piers

Structural Behaviour of Concrete-Encased CFST Box Stub Columns under Axial Compression

Flexural Performance of Concrete-Encased CFST Box Members

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Numerical Investigation on Compressive Performance of CFST Columns with Encased Built-Up Lattice-Angles

Concrete-encased CFST Columns under Combined Compression and Torsion: Experimental Investigation

Seismic Performance of Stiffened Concrete-Filled Double Skin Steel Tubes

Numerical Study of Concrete-Encased CFST under Preload Followed by Sustained Service Load

Finite Element Analysis on the Seismic Performance of Concrete-Filled Steel Tube Columns with a Multiple-Chamber Round-Ended Cross-Section

Numerical Investigation of the Performance of Segmental CFST Piers with External Energy Dissipators under Lateral Cyclic Loadings

Concrete-encased CFST Columns under Combined Compression and Torsion: Analytical Behaviour

Analysis of ultimate seismic performance of thin-walled concrete-filled steel tube bridge piers under dynamic load

Performance of concrete-encased CFST box members under bending

Seismic Performance of Concrete-Encased CFST Column to Steel Beam Joints with Different Connection Details

Performance of Concrete-Encased CFST Stub Columns under Axial Compression