Abstract:Concrete-filled steel tubular (CFST) column may be undergone coupled compression and torsion during its service life, and therefore, six CFST specimens were tested to analyze the torsional behaviour. The failure modes, torsion moment (T) versus torsional angle (θ) relationships and torsion moment-strain curves derived from the testing results for CFST specimens under different torsion conditions were compared and analyzed. Meanwhile, the numerical model of CFST members was developed via the software ABAQUS to further analyze the torsional mechanism. Moreover, the comparison of torsional performance between CFST column and steel-reinforced concrete-filled steel tubular (SRCFST) column was conducted. The results indicated that the T-θ curve of each specimen showed slight difference in the initial stage under diverse loading conditions; however, the specimens under torsion after compression exhibited highest ultimate torsional capacity, followed by the specimens under simultaneous compression-torsion and pure torsion. The T-θ curve of SRCFST columns with I-section steel or cruciform steel was similar to that of CFST columns, but the T-θ curve of SRCFST columns increased obviously in the later stage due to the inserted steel tube. In addition, the validity of the numerical model was verified against experiment. Then, the interaction force between steel tube and concrete and the internal forces of the characteristic points of the T-θ curves under different loading conditions and axial load levels were compared to understand the stress mechanism. Finally, the proposed calculation method for torsional capacity of CFST members under coupled compression-torsion could provide a more accurate prediction.

Concrete-encased CFST Columns under Combined Compression and Torsion: Analytical Behaviour

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Concrete-encased CFST Columns under Combined Compression and Torsion: Experimental Investigation

Structural Behaviour of Concrete-Encased CFST Box Stub Columns under Axial Compression

Behaviour of concrete-encased CFST columns under combined compression and bending

Numerical Investigation on Compressive Performance of CFST Columns with Encased Built-Up Lattice-Angles

Combined Axial and Flexural Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Torsional Behaviour of Concrete-Filled Circular Steel Tubular Members under Coupled Compression and Torsion

Analytical Behavior of Concrete-Encased CFST Columns under Cyclic Lateral Loading

Circular Concrete-Encased Concrete-Filled Steel Tube (cfst) Stub Columns Subjected to Axial Compression

Numerical Study of Concrete-Encased CFST under Preload Followed by Sustained Service Load

Performance of Concrete-Encased CFST Stub Columns under Axial Compression

Concrete-filled Bimetallic Tubes (CFBT) under Axial Compression: Analytical Behaviour

Research of circular concrete-filled steel tubular members subjected to shearing and axial compression

Concrete-encased CFST Members with Circular Sections under Laterally Low Velocity Impact: Analytical Behaviour

Behaviour of Hexagonal Concrete-Encased CFST Columns Subjected to Cyclic Bending

Seismic Performance of the Concrete-Encased CFST Column to RC Beam Joints: Analytical Study

Finite Element Analysis on Behavior of Reinforced Hollow High Strength Concrete Filled Square Steel Tube Short Columns under Axial Compression

Behaviour of concrete-filled steel tubular members subjected to shear and constant axial compression

Analytical Behaviour of Eccentrically Loaded Concrete-Encased Cfst Box Columns

Concrete-filled steel tubes subjected to axial compression: Life-cycle based performance