Abstract:Among high-temperature sorbents, the remarkable stability, low regeneration temperature, and high cyclic sorption capacity of Li4SiO4 sorbent have attracted considerable attention. However, the high cost of lithium sources during the synthesis of Li4SiO4 has restricted its practical application. Meanwhile, the extensive utilization of lithium-ion batteries (LIBs) in renewable energy development has sparked concerns regarding the proper management of numerous discarded LIBs. The successful combination of the recycling of spent LIBs with carbon capture technology using Li4SiO4 sorbent can not only alleviate the waste problem of a large number of LIBs, but also effectively reduce the cost of materials required to capture CO2. Herein, LIBs were utilized to synthesize low-cost Li4SiO4 sorbents for CO2 capture, and the CO2 sorption/desorption performance was evaluated. The optimal regeneration temperatures of Li4SiO4 sorbents from LIBs are generally lower than the traditional regeneration temperature (>700 ℃) because of the existence of Li2SiO3 in fresh Li4SiO4 sorbents from LIBs, thereby reducing the energy consumption of CO2 capture. The results showed that the extraction rate of Li2CO3 increased by 69.92 % and 77.28 % respectively when graphitic carbon (GC) and banana peel activated carbon (BAC) were introduced during the extraction process compared to the absence of reductant. However, Li4SiO4 modified with graphitic carbon (Li4SiO4-GC) shows better cyclic CO2 capture performance than that modified with activated carbon from banana peels (Li4SiO4-BAC). It is found that Li4SiO4-GC could maintain a high sorption of 0.23 g/g after 50 cycles under the conditions of sorption temperature of 525 ℃, desorption temperature of 650 ℃, and 15 vol%CO2, owing to its more diverse variety of crystal phase substances, particularly Li3NaSiO4 crystal phase that plays a positive promoting role in the cyclic sorption/desorption. In addition, Li4SiO4-GC has more developed pore structure after cyclic reactions that other sorbents, which provides more channels for the diffusion of lithium ions, oxygen ions, and sodium ions, making it easier to adsorb more CO2 and increasing the overall reaction rate.

An Efficient Approach for Preparation of Battery-Grade Li2CO3 from Intermediate Product Li2SiO3

Process intensification for the synthesis and purification of battery-grade Li 2 CO 3 with microfluidics

Preparation of battery-grade Li2CO3 efficiently by high shear dispersion at low temperature

Hydrothermal precipitation and separation of Li as intermediate product Li 2 SiO 3 from the alkali leach liquor

Preparation of Battery-Grade Lithium Carbonate with Lithium-Containing Desorption Solution

Adaptation of a dynamic in vitro model with real-time determination of butyrylcholinesterase activity in the presence of cyclosarin and an oxime.

Controlling of the Ratio of Submicron Particles and Size Effects in SiO Anode for Li-ion Batteries

A Temperature-Insensitive Wide-Dynamic Range Positive/Negative Full-Wave Rectifier Based on Operational Trasconductance Amplifier using Commercially Available ICs

Recovery of Li2CO3 from Spent LiFePO4 by Using a Novel Impurity Elimination Process

Acquired lumbar stenosis: topic review and a case series.

Continuous-flow Synthesis of Lithium Carbonate in a Microreactor System Based on Spent LIBs Recycling Process

Removal of SO42− from Li2CO3 by Recrystallization in Na2CO3 Solution

Removal of SO 42 − from Li 2 CO 3 by Recrystallization in Na 2 CO 3 Solution

Preparation of Li 4 SiO 4 from lithium-ion battery cathode waste and diamond wire saw silicon powder using a two-step process

Synthesis of high-performance Li4SiO4 sorbent for CO2 capture using Li2CO3 extracted from spent lithium batteries

Alkali Metal Salt Catalyzed Carbothermic Reduction for Sustainable Recovery of LiCoO2: Accurately Controlled Reduction and Efficient Water Leaching

Mechanochemical Reactions Between Polyanionic Borate and Residue Li2CO3 on LiCoO2 to Stabilize Cathode/electrolyte Interface in Sulfide-Based All-Solid-state Batteries

A Facile in Situ Synthesis of Nanocrystal-Fesi-embedded Si/SiO X Anode for Long-Cycle-life Lithium Ion Batteries

Producing battery grade lithium carbonate from salt‐lake brine via bipolar membrane carbon dioxide mineralization

Microbubble-assisted pressure carbonation for preparation of high purity lithium carbonate

Lithium Recovery from an Alumina Electrolysis Slag Leaching Solution with Strong Acidity: Separation of Lithium-Ion and Production of Battery Grade Lithium Carbonate