Abstract:Magnesium (Mg) and its alloys offer great potential for reducing vehicular mass and energy consumption due to their inherently low densities. Historically, widespread applicability has been limited by low strength properties compared to other structural Al-, Ti- and Fe-based alloys. However, recent studies have demonstrated high-specific-strength in a number of nanocrystalline Mg-alloys. Even so, applications of these alloys would be restricted to low-temperature automotive components due to microstructural instability under high temperature creep loading. Hence, this work aims to gain a better understanding of creep and associated deformation behavior of columnar nanocrystalline Mg and Mg-yttrium (Y) (up to 3at.%Y(10wt.%Y)) with a grain size of 5 nm and 10 nm. Using molecular dynamics (MD) simulations, nanocrystalline magnesium with and without local concentrations of yttrium is subjected to constant-stress loading ranging from 0 to 500 MPa at different initial temperatures ranging from 473 to 723 K. In pure Mg, the analyses of the diffusion coefficient and energy barrier reveal that at lower temperatures (i.e., T < ~423K) the contribution of grain boundary diffusion to the overall creep deformation is stronger that the contribution of lattice diffusion. However, at higher temperatures (T > ~423K) lattice diffusion dominates the overall creep behavior. Interestingly, for the first time, we have shown that the(101-1),(101-2),(101-3) and (101-6) boundary sliding energy is reduced with the addition of yttrium. This softening effect in the presence of yttrium suggests that the experimentally observed high temperature beneficial effects of yttrium addition is likely to be attributed to some combination of other reported creep strengthening mechanisms or phenomena such as formation of stable yttrium oxides at grain boundaries or increased forest dislocation-based hardening.

Inhibiting Creep in Fine-Grained MgAl Alloys Through Grain Boundary Stabilization

Creep behavior and dynamic precipitation of highly heat-resistant Mg alloy with low rare-earth content

Tensile Creep Behavior and Microstructure Evolution of Mg-11Gd-2Y-0.5Zr Alloy

Creep Deformation Mechanism and Microstructure Evolution of Mg-3Sm-0.5Zn-0.4Zr Alloy

Effect of Dynamic Precipitation on Creep Behavior of Mg-5zn-2al(-2y) Alloy

Influence of Thermal and Thermo-Mechanical Processing on the Creep Resistance of Mg-10Gd-3Y-0,4Zr Alloy

Atomic-scale investigation of creep behavior in nanocrystalline Mg and Mg-Y alloys

Enhancing the Creep Resistance in a RE-free Cast Mg-Al-Ca Alloy Through Microalloying of Ti

Creep Behavior of Mg–11Y–5Gd–2Zn–0.5Zr (wt.%) at 573 K

Achieving high strength and creep resistance of a Mg-13Gd-6Y-0.2Zr alloy forging fabricated by isothermal forging and artificial aging

Room temperature tensile creep behavior of Mg-6Zn-0.4Mn-0.3Al-0.2Ca (wt.%) alloy containing icosahedral quasicrystals

Creep Behavior and Precipitation Evolution of Mg-13Gd-2y-0.5zr Alloy

Degraded Creep Resistance Induced by Static Precipitation Strengthening in High-Pressure Die Casting Mg-Al-Sm Alloy

Abnormal creep behavior of Mg-12Gd-1MM-0.6Zr (wt.%) alloy at 300C

Effects of Alloying Elements on Creep Properties of Mg-Gd-Zr Alloys

High Temperature Creep Behavior of Mg-6Al-1Zn-1.8Gd-0.9Y Alloy

Compressive creep behavior of extruded Mg-4Sm-2Yb-0.6Zn-0.4Zr alloy

Evolution Process of Precipitate-Free Zones in a Mg-Gd Alloy During Creep

Unveiling the Collaborative Effects of Static Precipitation and Precipitate-Free Zone on the Compressive Creep Behaviors of Mg-10.5wt%Y Binary Alloy

Microstructural evolution of Mg–14Gd–0.4Zr alloy during compressive creep

Mechanical Properties and Creep Behavior of Mg–Al–Ca Alloys