Abstract:Ni‐rich layered cathode with aluminum and indium co‐modified crystal and surface structures achieves a simultaneous suppression of cracking and resistive surface film growth, thus gaining remarkably enhanced electrochemical performance compared to the pristine counterpart. Ni‐rich layered oxides are considered as promising cathodes for next‐generation lithium‐ion batteries. However, they still suffer microstructure and surface instability particularly under high operating voltage, leading to rapid capacity fading and battery failure. In this context, Ni‐rich layered cathodes (LiNixCoyMn1−x−yO2; LNCM) with aluminum and indium co‐modified crystal and surface structures are developed by a simple one‐pot calcination approach. Battery tests show that the Al and In co‐modified LNCM electrodes demonstrate remarkably enhanced rate capability and cycling stability compared with the pristine LNCM, Al‐doped LNCM, and In‐modified LNCM counterparts. Further characterizations reveal a simultaneous suppression of cracking and resistive film growth. The improved microstructural and surface stability originate from the synergistic functions of Al and In co‐modification. The incorporation of Al3+ into transition metal slab significantly reduces the Li+/Ni2+ antisite, which noticeably mitigates the undesired layer to rock‐salt phase transformation. The In3+ dopant dispersed in Li interslab can dissipate the anisotropic lattice strain, enabling greatly improved reversibility of H2↔H3 phase transition occurred in delithiation‐lithiation processes. Meanwhile, the synchronously formed LiInO2 adherent coatings deplete lithium residues, facilitate lithium‐ion transfer, and resist electrolyte corrosion. Microstructure and surface engineering through Al and In co‐modification offer a promising design strategy for Ni‐rich layered cathodes.

Interface Chemical Reconstruction with Residual Lithium Compounds on Nickel-Rich Cathode by Nonstoichiometrical MoO3-x Coating Enables High Stability

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Enhanced structurally stable cathodes by surface and grain boundary tailoring of Ni-Rich material with molybdenum trioxide

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Reinforcing the Stability of Cobalt-free Lithium-rich Layered Oxides via Li-poor Ni-rich Surface Transformation

Simultaneous Li2MoO4 coating and Mo6+ doping improves the structural stability and electrochemical properties of nickel-rich LiNi0.83Co0.11Mn0.06O2

Enhancing high-voltage structural stability of single-crystalline Ni-rich LiNi0.9Mn0.05Co0.05O2 cathode material by ultrathin Li-rich oxide layer for lithium-ion batteries

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries

Integrating Trace Ti-doping and LiYO2-coating to Stabilize Ni-rich Cathodes for Lithium-Ion Batteries

Enhanced interfacial reaction interface stability of Ni-rich cathode materials by fabricating dual-modified layer coating for lithium-ion batteries

In-situ Formation of Hybrid Li3PO4-AlPO4-Al(PO3)3 Coating Layer on LiNi0.8Co0.1Mn0.1O2 Cathode with Enhanced Electrochemical Properties for Lithium-Ion Battery

Aluminum and Indium Co‐Modified Ni‐Rich Layered Cathode with Enhanced Microstructure and Surface Stability for Lithium‐Ion Batteries

Organic coating strategy with oxidized oxygen anion capture to suppress lattice oxygen evolution of Ni-rich cathode materials at high voltage

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material

B<sub>2</sub>O<sub>3</sub>/LiBO<sub>2</sub> dual-modification layer stabilized Ni-rich cathode for lithium-ion battery

Stabilization of high-voltage layered oxide cathode by utilizing residual lithium to form NASICON-type nanoscale functional coating

B2O3/LiBO2 dual-modification layer stabilized Ni-rich cathode for lithium-ion battery

Improving electrochemical performances of Lithium-rich oxide by cooperatively doping Cr and coating Li<sub>3</sub>PO<sub>4</sub> as cathode material for Lithium-ion batteries

Significant Enhancement of the Capacity and Cycling Stability of Lithium-Rich Manganese-Based Layered Cathode Materials via Molybdenum Surface Modification

Uncovering the Role of Nb Modification in Improving the Structure Stability and Electrochemical Performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Charged at Higher Voltage of 4.5 V