Abstract:Reducing the residual stresses and improving the mechanical strength of large-scale ceramic/metal brazing joints is an important problem that must be solved for its practical engineering application. Using composite filler with solid-state phase transformation ceramic particulates, it is theoretically feasible to relieve the residual stress and improve the mechanical properties of ceramic/metal brazed joints. In this study, Cu mesh, Ag-28Cu-2Ti (wt.%), and yttria-stabilized zirconia (0.6 mol.% YSZ solid-state phase transformation ceramic particulates) composite power fillers were used in the brazing of Ti3SiC2 ceramic and pure copper. The microstructure of joints and YSZ particulates in the interface was investigated and confirmed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), scanning transmission electron microscopy (STEM), and transmission electron microscopy (TEM). In addition, the effect of YSZ particulates content on the mechanical properties of joints was investigated and evaluated by the shear strength. The results show that the interfacial phases were mainly Ti5Si3, TiC, TixCu, Ag (s, s), Cu (s, s), and YSZ particulates. Moreover, most of YSZ particulates undergo the solid-state phase transformation from tetragonal zirconia (t-ZrO2) to monoclinic zirconia (m-ZrO2) during the cooling process of brazing. The abnormal volume expansion of the solid-state phase transformation reduced the thermal mismatch between Ti3SiC2 ceramic and filler, thereby reducing the residual stress in the interface of joint. When using composite filler with 6 wt.% YSZ particulates, the shear strength of Ti3SiC2/Cu joint reached the maximum. The maximum average shear strength of the joints was 80.2 MPa, which was about 103.6% more than the joint without YSZ particulates.

Investigating the Effect of WC Reinforcements in Cu Ti Composite Filler on the Microstructural Evolution and Mechanical Characteristics in Brazing Cf/SiC and GH3536

Investigating the effect of WC reinforcements in Cu Ti composite filler on the microstructural evolution and mechanical characteristics in brazing C f /SiC and GH3536

Investigation of Si3N4 Ceramic/42CrMo Steel Joints Brazed with Ag-Cu-Ti Brazing Alloy Plus WC Particles

Microstructural evolution and mechanical property of a SiCf/SiC composite/Ni-based superalloy joint brazed with an Au-Cu-Ti filler

Effects of Interfacial Reaction and Atomic Diffusion on the Mechanical Property of Ti 3 SiC 2 Ceramic to Cu Brazing Joints

Brazing ZrO2 Ceramic and TC4 Alloy by Novel WB Reinforced Ag-Cu Composite Filler: Microstructure and Properties

Design and Preparation of High-Content Sc2W3O12 Dispersed Interlayer: Alleviating the High Residual Stress of Cf/SiC and GH3536 Joint

Achieving ultrafine grain strengthening C f /SiC-GH3536 joints brazed with Cu-Ti-WC composite interlayer via cold spray additive manufacturing

Effect of Ti content on microstructure and mechanical properties of SiCf/SiC composites/GH536 superalloy joints brazed with CoFeCrNiCuTi high entropy filler

A Study of the SiCf/SiC Composite/ni-Based Superalloy Dissimilar Joint Brazed with a Composite Filler

Effect of Holding Time on Microstructure and Mechanical Properties of SiC/SiC Joints Brazed by Ag-Cu-Ti + B4C Composite Filler

Investigation on the microstructure, mechanical and electrical properties of Ti3SiC2/Cu joint obtained by Ti25Zr25Ni25Cu25 amorphous high entropy alloy and Ag composite filler

Unveiling the Strengthening Effect of Nb in Ti3SiC2/Ti25Zr25Ni25Cu25 + Nb/GH3536 Brazed Joint

Mechanical properties and microstructures of hybrid ultrasonic resistance brazing of WC-Co/BeCu

Improvement for Ti3SiC2/Cu Joint Brazed Using Composite Fillers with Abnormal Expansion Ceramic Particulates

Microstructure Evolution and Mechanical Properties of SiC and Nb Joint Brazed with AgCuTi/(Sr0.2Ba0.8)TiO3-Cu/AgCuTi Composite Fillers

Microstructure and Mechanical Properties of the SiC/Nb Joint Brazed Using AgCuTi + B4C Composite Filler Metal

Interfacial microstructure and mechanical properties of WC–Co/40Cr joints brazed at low–temperature with Ag–Cu–Ti + Sn novel filler

Design of Multi-Layered Architecture in Dissimilar Ceramic/metal Joints with Reinforcements Clustering Away from Both Substrates

The Effect of Ti Content in the Filler Powder on Interfacial Microstructure and Mechanical Properties of C/C Composites/T2-Copper Joints via Thermo-Compensated Resistance Brazing Welding

Achieving Ultrafine Grain Strengthening Cf/SiC-GH3536 Joints Brazed with Cu-Ti-WC Composite Interlayer Via Cold Spray Additive Manufacturing