Abstract:An Mg compensating strategy is proposed to realize highвАРperformance nвАРtype Mg3(Bi, Sb)2 thermoelectric alloys by the meltingвАРsintering approach, reaching peak ZTвЙИ1.55 at 723 K, and average ZT вЙИ1.25 within 323вАУ723 K. This strategy can also be used to obtain nвАРtype Mg3(Bi, Sb)2/Fe legs by a oneвАРstep sintering process, displaying low interfacial contact resistivity, and improved thermal stability. NвАРtype Mg3(Bi, Sb)2вАРbased thermoelectric (TE) alloys show great promise for solidвАРstate power generation and refrigeration, owing to their excellent figureвАРofвАРmerit (ZT) and using cheap Mg. However, their rigorous preparation conditions and poor thermal stability limit their largeвАРscale applications. Here, this work¬†develops an Mg compensating strategy to realize nвАРtype Mg3(Bi, Sb)2 by a facile meltingвАРsintering approach. "2D roadmaps" of TE parameters versus sintering temperature and time are plotted to understand the MgвАРvacancyвАРformation and MgвАРdiffusion mechanisms. Under this guidance, high weight mobility of 347 cm2¬†VвИТ1¬†sвИТ1 and power factor of 34 ¬μW¬†cmвИТ1¬†KвИТ2 can be obtained for Mg3.05Bi1.99Te0.01, and a peak ZTвЙИ1.55 at 723 K and average ZTвЙИ1.25 within 323вАУ723 K can be obtained for Mg3.05(Sb0.75Bi0.25)1.99Te0.01. Moreover, this Mg compensating strategy can also improve the interfacial connecting and thermal stability of corresponding Mg3(Bi, Sb)2/Fe TE legs. As a consequence, this work¬†fabricates an 8вАРpair Mg3Sb2вАРGeTeвАРbased powerвАРgeneration device reaching an energy conversion efficiency of вЙИ5.0% at a temperature difference of 439 K, and a oneвАРpair Mg3Sb2вАРBi2Te3вАРbased cooling device reaching вИТ10.7¬†¬∞C at the cold side. This work paves a facile way to obtain Mg3Sb2вАРbased TE devices at low cost and also provides a guide to optimize the offвАРstoichiometric defects in other TE materials.

Mg-Defect Compensation to Realize High Performance at Room Temperature in Mg3Bi2-Based Thermoelectric Single Crystals

Bi-Deficiency Leading to High-Performance in Mg3 (Sb,Bi)2 -Based Thermoelectric Materials

Bi-Deficiency Leading to High-Performance in Mg<sub>3</sub>(Sb,Bi)<sub>2</sub>-Based Thermoelectric Materials

Robust Room Temperature Thermoelectric Performance of Mg3(Sb, Bi)2‐Based Alloys via Multivalent Mn Doping

Boosting Room-Temperature Thermoelectric Performance of Mg3sb1.5bi0.5 Material Through Breaking the Contradiction Between Carrier Concentration and Carrier Mobility

Boosting room-temperature thermoelectric performance of Mg 3 Sb 1.5 Bi 0.5 material through breaking the contradiction between carrier concentration and carrier mobility

Excellent Room Temperature Thermoelectric Performance in Mg3Sb2‐Based Alloys via Multi‐Functional Doping of Nb

Revelation of Inherently High Mobility Enables Mg3Sb2 As a Sustainable Alternative to N‐bi2te3 Thermoelectrics

High performance of Mg3Bi1.5Sb0.5 based materials for power generation: Revealing the counter-intuitive effect of tuning Bi content on the thermoelectric properties

High-Performance Mg<sub>3</sub>Sb<sub>2-<i>x</i></sub>Bi<i><sub>x</sub></i> Thermoelectrics: Progress and Perspective

Outstanding Room-Temperature Thermoelectric Performance of N-Type Mg3Bi2-Based Compounds Through Synergistically Combined Band Engineering Approaches

High thermoelectric performance and anisotropy studies of n-type Mg3Bi2-based single crystal

The manipulation of substitutional defects for realizing high thermoelectric performance in Mg3Sb2-based Zintl compounds

Mg Compensating Design in the MeltingвАРSintering Method For HighвАРPerformance Mg3(Bi, Sb)2 Thermoelectric Devices

Bismuth-free Mg3Sb2 with Enhanced Room-Temperature Thermoelectric and Mechanical Properties

Enhancing Thermoelectric Performance in P-type Mg3Sb2-based Zintls Through Optimization of Band Gap Structure and Nanostructuring

Mg3(Bi,Sb)2 single crystals towards high thermoelectric performance

Improved figure of merit (z) at low temperatures for superior thermoelectric cooling in Mg3(Bi,Sb)2

High-Performance Mg3Sb2-xBix Thermoelectrics: Progress and Perspective

The manipulation of substitutional defects for realizing high thermoelectric performance in Mg<sub>3</sub>Sb<sub>2</sub>-based Zintl compounds

Realizing Ultrahigh Near-Room-Temperature Thermoelectric Figure of Merit for N-Type Mg3(Sb,Bi)2 through Grain Boundary Complexion Engineering with Niobium