Abstract:High temperature is an important factor affecting the mechanical properties and crack propagation behavior of granite. In this study, the mechanical properties and thermal damage mechanism of granite after high temperature are studied experimentally. Subsequently, based on the content and distribution of granite minerals, combined with computed tomography (CT) technique and grain-based model (GBM) modeling method, a novel discrete element numerical model considering real mineral distribution is introduced, and the rationality of the method is verified by experiments. On this basis, the mechanical behavior, crack propagation behavior and failure mode of granite after high temperature are studied. The results show that 450 °C is the thermal damage threshold of granite in this study. When T ≤ 450 °C, the development of thermally-induced microcracks is not significant, the P-wave velocity of granite decreases slightly, and the change of mechanical properties is not obvious. When T > 450 °C, the thermally-induced microcrack propagates rapidly, the fracture network and fracture zone are formed locally in the specimen, and the P-wave velocity and mechanical properties of granite deteriorate significantly. The simulation results show that the number of thermally-induced microcracks in granite specimens is positively correlated with temperature, and the tensile cracks are mainly at the mineral boundary, and the thermal stress concentration between mineral particles is the main cause of thermally-induced microcracks. After temperature treatment, there are mainly tensile cracks in granite specimens under uniaxial compression, and the orientation of tensile cracks tends to be isotropic with the increase of temperature. When T < 600 °C, the crack distribution and failure mode of granite specimens under uniaxial compression are consistent with those at room temperature. When T ≥ 600 °C, thermally-induced microcracks begin to dominate the uniaxial compression failure process, and granite specimens begin to show ductile failure characteristics, and the brittle-plastic transition was observed between 600 °C and 750 °C.

Energy Storage Characteristics and Damage Constitutive Model of Thermally Treated Granite: an Experimental Investigation

Multiscale damage and thermal-stress evolution characteristics of rocks with thermal storage potential under thermal shocks

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Research on the Impact Mechanical Properties of Real-Time High-Temperature Granite and a Coupled Thermal-Mechanical Constitutive Model

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Coupled Thermo–Mechanical Damage Evolution of Granite under Repeated Heating–Cooling Cycles and the Applications of Mohr–Coulomb and Drucker–Prager Models

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

Mechanical Behaviors of Granite After Thermal Treatment Under Loading and Unloading Conditions

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

On the Statistical Damage Constitutive Model and Damage Evolution of Hard Rock at High-Temperature

Fractal Characteristics and Energy Dissipation of Granite After High-Temperature Treatment Based on SHPB Experiment

Thermo-mechanical Coupling Characteristics of Granite under Triaxial Pressures and Ultrahigh Heating Rates

Effects of temperature and increasing amplitude cyclic loading on the mechanical properties and energy characteristics of granite

Effect of high temperature on the brittleness index of granite: an experimental investigation

Modeling damage evolution in granite under temperature using a thermo-mechanical grain-based FDEM model

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Thermal effects on prediction accuracy of dense granite mechanical behaviors using modified maximum tangential stress criterion

Physical and Mechanical Properties of Granite after High-Temperature and Acidic Treatment for the Enhanced Geothermal System

Experimental investigation on the macro- and micromechanical properties of water-cooled granite at different high temperatures

Temperature-Dependent Permeability Model of Granite After Thermal Treatment Based on Energy Dissipation Theory and Fractal Theory