Abstract:Freeform surface parts, such as blades, exhibit complex structures and excellent aerodynamic performance, making them widely utilized in aerospace propulsion systems. However, monitoring and ensuring surface quality during the milling process of such components is challenging, leading to high scrap rates and unguaranteed processing efficiency. To address these issues, this paper investigated the milling process monitoring and position-dependent surface roughness prediction for the thin-walled blade with the material of Ti-6Al-4 V. The monitored blade-root acceleration signal was utilized to develop a discrete spatial vibration model based on the machining characteristics of the blade. This involved using Fourier transform and inverse techniques to combine the frequency response functions and cutting force for acceleration calculation, which was then compared to measured values to validate the model’s monitorability. Aiming at the surface roughness prediction, a predictive method for the entire machined surface was proposed, consisting of signal pre-processing, feature extraction and selection, and construction of extreme learning machine (ELM) model. Time-domain, frequency-domain, and time–frequency-domain methods were adopted for feature extraction. To enhance the generalization ability and accuracy of the predictive model, the maximal information coefficient was employed for correlation analysis, resulting in the selection of 12 features as input for the ELM-based surface roughness prediction system. Comparison of the measured and predicted surface roughness results revealed that all errors were less than 14%, with an average error of only 6.70%, demonstrating the validity and reliability of the prediction method. Notably, the proposed monitoring method does not interfere with the milling process and enables prediction of surface roughness at arbitrary positions on the entire surface during variable-parameter processing of freeform surface parts, thereby improving the quality and precision of the machined surface. The potential application of this paper lies in the final inspection of defects in industrial products and reducing the service risk of non-conforming parts.

Design, Motion-Planning, and Manufacturing of Custom-Shaped Tools for Five-Axis Super Abrasive Machining of a Turbomachinery Blade Type Component

Design, Motion-planning, and Manufacturing of Custom-shaped Tools for 5-axis Super Abrasive Machinig of a Turbomachinery Blade Type Component

Collisionless Tool Orientation Smoothing above Blade Stream Surface Using NURBS Envelope

A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades

Precision and energy-efficient ball-end milling of Ti6Al4V turbine blades using particle swarm optimization

Position-dependent milling process monitoring and surface roughness prediction for complex thin-walled blade component

Design and Adaptive Terminal Sliding Mode Control of a Fast Tool Servo System for Diamond Machining of Freeform Surfaces

Optimizing tool-path generation for three-axis machining of a sculptured impeller blade surface

Path Planning for Machining on Surface of a Blade

Research on adaptive CNC machining arithmetic and process for near-net-shaped jet engine blade

Effect of tool orientation on surface roughness and dimensional accuracy in ball end milling of thin-walled blades

Five-Axis Flank Milling for Design and Manufacture of Turbocharger Compressor Impeller

Multi-axis CNC finishing and surface roughness prediction of TC11 titanium alloy open integral micro impeller

Turbine Blade CNC Machining Simulation Analysis Based on MATLAB and UG

Efficient 5-Axis CNC Trochoidal Flank Milling of 3D Cavities Using Custom-Shaped Cutting Tools

Tool Path Generation for Turbine Blades Machining with Twin Tool

Tool path generation for machining shrouded turbine blisk

A Novel Five-Axis Rough Machining Method for Efficient Manufacturing of Centrifugal Impeller with Free-Form Blades

5-axis double-flank CNC machining of spiral bevel gears via custom-shaped milling tools — Part I: Modeling and simulation

Machining Fixture for Adaptive CNC Machining Process of Near-Net-shaped Jet Engine Blade