Abstract:Advances in Mechanical Engineering, Volume 16, Issue 4, April 2024. The titanium alloy open integral micro impeller has a strong material strength and high removal rate in the field of multi-axis CNC machining. The flow channel is tiny and the blades are thin and highly twisted. It is difficult to control the surface accuracy and prone to overcutting and undercutting. The NX2212 software post-processing module plans two distinct blade finishing process routes and verifies them using virtual machine tool simulation, taking into account the technical challenges of micro impeller machining. Following verification, the tool path machining code is imported into MATLAB for data fitting. The workpiece surface working condition is determined based on the simulation findings, the blade surface roughness value is calculated, and a physical simulation model of blade finishing is created in the finite element analysis software. The outcomes demonstrate how well the "segmented and sub-regional cutting" processing method may raise blade accuracy. The leading and trailing edges of the blade both had surface roughness increases of 4.86% and 4.19%. The surface morphology of the micro impeller is measured using a white light interferometer, and it is CNC machined using two distinct process methods. The findings demonstrate that there is a significant difference between the value calculated by the finite element analysis software and the surface roughness value measured experimentally which together make up less than 5%. An investigation of the impact of cutting parameters on the surface roughness of micro-structure components is carried out using a three factor, three-level BBD experiment that is founded on the second-order response surface method. The findings indicate that the feed per tooth influences surface roughness more significantly than cutting depth and cutting speed for a reasonable range of cutting parameters; Surface roughness will rise with lower or higher cutting speeds; Raising the feed per tooth and the cutting speed simultaneously may reduce surface roughness; Surface roughness can be accurately predicted and controlled using the second-order response surface method.

Turbine Blade CNC Machining Simulation Analysis Based on MATLAB and UG

Tool Path Generation for Long Turbine Blades Machined with Twin-cutters

Worn area modeling for automating the repair of turbine blades

Design and numerical simulation on spindle-driven's turbine cascade of high-speed milling

Multi-axis CNC finishing and surface roughness prediction of TC11 titanium alloy open integral micro impeller

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Modeling and Analysis of a Francis Turbine Blade

Tool Path Generation for Turbine Blades Machining with Twin Tool

Research on adaptive CNC machining arithmetic and process for near-net-shaped jet engine blade

Modeling and machining of integral impeller based on NURBS curve

Tool path generation for machining shrouded turbine blisk

Integrated Analysis Method of Thin-Walled Turbine Blade Precise Machining

Blade Design with Three-Dimensional Viscous Analysis and Hybrid Optimization Approach

Key technologies for surface modeling of a rotor based on NURBS method

Analysis of machining deformation for adaptive CNC machining technology of near-net-shaped jet engine blade

Machining Trajectory Generation and Simulation of Miniature Integral Impeller

Application of Computer Simulation Technology in Turbine Blades of Aero Engines Manufacturing

Modeling and Performance Analysis of Machining Fixture for Near-Net-shaped Jet Engine Blade

Investigate on Computer-Aided Fixture Design and Evaluation Algorithm for Near-Net-shaped Jet Engine Blade

Design, Motion-planning, and Manufacturing of Custom-shaped Tools for 5-axis Super Abrasive Machinig of a Turbomachinery Blade Type Component

Research of Design on the Blade Shape and Flow Channel by NURBS Technology