Mathematical modeling and simulation of generation milling process to manufacture complex face gear surface through multi-axis machine kinematics

Prasmit Kumar Nayak,G.L. Samuel,M.S. Shunmugam

DOI: https://doi.org/10.1016/j.jmapro.2023.12.027

IF: 5.684

2024-01-01

Journal of Manufacturing Processes

Abstract:Manufacturing of face gear is a complex process, due to its varying geometry, hence the application is not wide as conventional gear geometry. The developments in analytical tools and kinematics of the CNC machine tools motivate researchers to explore the manufacturing process and associated applications. This article presents an efficient method for the generation milling of spur face gear utilizing a nutating head multi-axis CNC machine tool where the tool swings about an arbitrary axis in an inclined plane. The mathematical model of the disk milling cutter and face gear geometry were derived from the shaper geometry by applying the theory of gearing, equation of meshing and coordinate transformation. The cutter location (CL) data was evaluated by aligning the tool orthogonal unit vector and the tooth surface normal vector at the contact point by calculating the appropriate transformation matrices. The evaluation of machine coordinates on a multi-axis CNC milling machine was analyzed with respect to the machine pivot point and the axes movement during generation milling for the face gear drive was studied on the nutating head machine. The NC data is derived from the CL data using the inverse kinematics and the machining simulation was carried out using suitable software. The tooth surface deviation of a maximum of 43.5 μm was observed between the simulated model and the theoretical model, which is well within the requirement of roughing. The generation milling process with the proposed machine configuration is concluded as a profound face gear manufacturing technique.

engineering, manufacturing

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the efficient generative milling process for manufacturing the surfaces of complex face gears. Specifically, the paper explores how to utilize the dynamic characteristics of a five - axis CNC machine tool with a non - orthogonal (tilted) head to achieve this goal through multi - axis machine tool kinematics. Due to the complexity of their geometric shapes, face gears are very difficult to manufacture, so there are no standard machine tools or general - purpose settings that can be used. However, with the development of simultaneous five - axis CNC machine tools and the progress of analysis tools, researchers have begun to attempt to imitate existing standard gear machine tools and adapt to the geometric arrangements between two pairs of meshing components, such as spur gear - face gear drives, helical gear - face gear drives, etc., through appropriate coordinate system modifications.

A new generative milling method is proposed in the paper for manufacturing large - scale face gears on a five - axis CNC milling machine equipped with a tilted head (B - axis) and a C - axis rotary table configuration. The main advantage of this method lies in its ability to simulate the actual meshing conditions between a disc - shaped cutter and a spur - face gear by swinging the cutter around a virtual forming axis and rotating around the face - gear axis, thereby achieving the machining of complex surfaces. In addition, the paper also details the methodology for generating complex face gears through multi - axis machine tool dynamic simulation, including steps such as the calculation of cutter position data, the evaluation of machine tool coordinates, and the generation of CNC data.