Abstract:Gas foil bearings have bright application prospects in oil-free turbomachinery such as aircraft air cycle machines, compressors and gas turbines. To extend the applicability of foil bearings to high-speed and heavy-load systems, the axial force produced primarily by the pressure difference between the turbine and compressor sides must be taken into consideration. The thrust disc of the rotor is typically used to sustain the axial force and maintain the attitude of the rotor in a rotor-bearing system. In an analytical model used to predict the performance of gas foil thrust bearings (GFTBs), fluid–structure interaction must be considered because of the coupling effects of hydrodynamic lubrication and the compliance of bearing surface. In this study, a link-spring structural model was employed to calculate the equivalent vertical stiffness of the bump foil. This model exhaustively considered the effect of three factors: flexibility of the bump foil, interactions between bumps, and frictional forces at the contact surfaces. In addition, top foil deflection that directly affects film thickness is calculated using a finite-element shell model. The static and dynamic characteristics of GFTBs were predicted after solving the steady-state Reynolds equation and two linearized dynamic coefficient equations which were obtained with perturbation method by using finite-difference method. The structural deformation equation was substituted into the Reynolds equations in the calculation process. The calculated static load was compared with the published experimental data, and the results validated the theoretical analysis. Thereafter, the static and dynamic characteristics including impact of rotational speed, initial minimum film thickness and the ratio of the inlet to outlet film thicknesses were analyzed. Parametric studies were also conducted to evaluate the effect of different structural parameters of the bump foil and journal tilting on the static characteristics of GFTBs. Because the proposed analytical model is completely algebraic, it can be easily programmed for accurately and effectively investigating the performance of GFTBs.

A numerical algorithm for gas foil bearing simulation with considering three-dimensional structure

An Efficient Three-Dimensional Foil Structure Model for Bump-Type Gas Foil Bearings Considering Friction

A Fully Coupled Elastohydrodynamic Model for Static Performance Analysis of Gas Foil Bearings

Numerical Investigation of Bump Foil Configurations Effect on Gas Foil Thrust Bearing Performance Based on a Thermos-Elastic-Hydrodynamic Model

Modified Fourier-Galerkin Solution For Aerospace Skin-Stiffener Panels Subjected To Interface Force And Mixed Boundary Conditions

A Novel Method for Calculating the Dynamic Force Coefficients of Gas Foil Bearings and Its Application in the Rotordynamic Analysis

Study of load carrying mechanism of a novel three-pad gas foil bearing with multiple sliding beams

A New Dynamic Mesh Algorithm for Studying the 3D Transient Flow Field of Tilting Pad Journal Bearings

Simulation and Experimental Verification of Dynamic Characteristics on Gas Foil Thrust Bearings Based on Multi-Physics Three-Dimensional Computer Aided Engineering Methods

A Three-Dimensional Fictitious Domain Method for the Simulation of Fluid-Structure Interactions

A New Method for Studying the 3D Transient Flow of Misaligned Journal Bearings in Flexible Rotor-Bearing Systems

A nonlinear model for dynamic performance analysis of gas foil bearing-rotor system considering frictional contacts

Calculation and Analysis of Air Bearing Performance for Magnetic Head/Disks

Hysteresis Behaviors of a Bump-Type Foil Bearing Structure with Amended LuGre Friction Model

New Numerical Solution for Self-Acting Gas Journal Bearings

Fluid-solid coupled simulation on thermal management of hydrodynamic gas foil bearing with an axial cooling throughflow

Numerical Algorithm for Fluid–solid Coupling in Reciprocating Rod Seals

Parametric study on static and dynamic characteristics of bump-type gas foil thrust bearing for oil-free turbomachinery

Development and performance research of a new-type air foil bearing with combined bump foils

DYNAMIC RESEARCH AND DESIGN OF THREE-DIMENSIONAL ALL GAS FOIL BEARING ROTOR SYSTEM

Numerical and experimental investigation on dynamic performance of bump foil journal bearing based on journal orbit