Abstract:Needle coke has attracted much attention as a high-quality raw material for high-power graphite electrodes and other advanced functional materials. In this study, needle coke was prepared by co-carbonization of medium and the low temperature coal tar refined pitch (RCTP) and the high temperature coal tar refined pitch (RHCTP). The effect of co-carbonization of blended refined pitches with different proportions on the structure and properties of needle coke was studied. Elemental analysis, 1 H NMR spectroscopy, Fourier transform infrared spectroscopy, and gas chromatography-mass spectrometry revealed the effect of changes in the key components of the blended refined pitch on the structure of needle coke. In addition, the structure and properties of needle coke were analyzed by polarized light microscopy, scanning electron microscopy, X-ray diffraction, Raman spectroscopy and powder resistivity. The results showed that adding RHCTP to RCTP can increase the content of aromatic hydrocarbons and reduce the content of heterocyclic compounds in the blended refined pitch, which was beneficial to the evolution and growth of carbonaceous structures. The fiber content of needle coke (N-R-C-15) prepared by adding 15 wt% RHCTP to RCTP was 50 wt%, the optical texture index (OTI) of the coke was 63.04, Lc=8.387 nm, La=18.17 nm, d 002 =0.3427 nm, the content of well-aligned carbon microcrystals was 91.17 wt%, and the content of perfect graphite crystals reached 24.37 wt%. As the ratio of RHCTP in RCTP increased, the needle coke exhibited more fibrous structures, the degree of defects in graphite crystals decreasing, and the degree of graphitization increasing. In addition, with the increasing proportion of RHCTP in RCTP, the average resistivity of needle coke decreased from 167.55 μΩ·m to 144.5 μΩ·m, and the average powder compaction density increased from 1.065 g/cm 3 to 1.206 g/cm 3 .

Improvement of Tensile Strength and Anti-Oxidation Property of Graphite Electrode for Electric Arc Furnace Through Heterogenization of Binder Pitch

Cohesion and Toughness Improvement of Pitch Binder by Thermosetting Resin Modification for Tib2/C Composite Cathode

Effect of the structure and properties for carbon graphite materials with oleic acid modified multi-walled carbon nanotubes

Effects of co-carbonization of medium and low temperature refined pitch and high temperature refined pitch on the structure and properties of needle coke

Improving the anti-oxidation and water wettability of graphite through the design of coating structure for the preparation of Al2O3–SiC–C castables

Effects Of Heat-Treatment Temperature And Binder Content On The Microstructure And Thermal Conductivity Of Graphite Flake-Carbon Composites

Effect of Binders on the Crushing Strength of Ferro-Coke

Influence of Heat Treatment on the Properties of PEN/Modified Graphite Composite

Improvement of the Electrical-Mechanical Performance of Epoxy/Graphite Composites Based on the Effects of Particle Size and Curing Conditions

Study on Preparation of Isotropic Graphite With Natural Amorphous Graphite

Microstructure and mechanical properties of pitch based mixture modified by additions of graphene oxide precursor and TiB2 particles

Effect of kneading and carbonization temperature on the structure of the carbon block for thermally conductive bulk graphites

Experiments and Modeling for Thermal Conductivity of Graphite Nanoplatelets/carbon Composites

The Use of Asphalt Emulsions As a Binder for the Preparation of Polycrystalline Graphite

Effect of pitch crystallinity on electrochemical performance of graphite carbon coatings

The Effect of Oxygen Content in Binderless Cokes for High-Density Carbon Blocks from Coal Tar Pitch

Homogenous and Highly Isotropic Graphite Produced from Mesocarbon Microbeads

Simultaneously Improved Toughness and Dielectric Properties of Epoxy/Graphite Nanosheet Composites

Effect of Nano Dispersant Additions to the Electrodes for Aluminum Electrolysis

Graphite Blocks with Preferred Orientation and High Thermal Conductivity

In-Situ Doping B4C Nanoparticles in Mesophase Pitch for Preparing Carbon Fibers with High Thermal Conductivity by Boron Catalytic Graphitization