Abstract:Traditional cellulose filter media used for air filtration in vehicle engines are characterized by 99.9% filtration efficiency and accuracy above 2–5 μm. The highest engine component wear is caused by dust grains above 1 μm. Filter media with nanofiber additions provide greater filtration efficiency of dust grains below 5 μm. Filter material selection for vehicle engine air filter is a problem because their manufacturers mainly provide only the structure parameters: pore size, air permeability, and thickness. There is no information about material filtration properties using polydisperse test dust. The manuscript presents methodology and experimental test results of five samples A, B, C, D and E, filter materials differing in their chemical composition and structure parameters. In the first stage, efficiency characteristics φw, filtration accuracy dzmax and the flow resistance Δpw depending on the dust absorption coefficient km of three filter cartridges of each material, A, B, C, D and E, were determined. Then, from each material characteristics of one piece was selected in order to compare their initial and initial period efficiencies as well as changes in the flow resistance depending on the dust absorption coefficient km. Obtained results showed that the filter materials differ significantly in efficiency and accuracy values in the initial filtration period. Initial period duration is also different, i.e., filtration efficiency increasing time to a certain value, which for materials with a nanofiber layer is much shorter, which minimizes engine component wear. For materials with nanofibers, flow resistance increase intensity is greater, which results from surface filtration. Filtration efficiency of each filter material sample A, B, C, D and E was assessed with the filtration quality coefficient including the efficiency and flow resistance. In the available literature, the problem of increasing filtration efficiency in the initial period is known, but there are no results for specific filter materials. Research shows that filter material characteristics are closely related. Each increase in efficiency and accuracy of intake air filtration reduces engine components wear, but it is related to flow resistance increase in the engine intake system, which reduces its power, and increases need for more frequent filter servicing.

Filter quality coefficient: a way to optimize parameters of nonwoven used in filter

Optimization on the performance of fibrous filter through computational fluid dynamic simulation coupled with response surface methodology

Optimisation of punching parameters for enhanced filtration performance of non-woven by response surface methodology

Filter Quality of Pleated Filter Cartridges

Exercising hybrid model to design an optimized electrospun polyamide-6 nanofibrous mat for air filtration applications

Development of Needle-punched Nonwoven Fabrics from Flax Fibers for Air Filtration Applications

Experimental Study of Filtration Materials Used in the Car Air Intake

The Performance Testing and Analysis of Common New Filter Materials: A Case of Four Filter Materials

Modifying the Fiber Structure and Filtration Performance of Polyester Materials Based on Two Different Preparation Methods

Assessment of the physiochemical properties and sustainability of locally produced ceramic G-filter in a long term experiment

Experimental study of materials for the filtration of the intake air of the internal combustion engine of a motor vehicle

Structure and morphology optimization of nanofiber membrane for the application of high-performance air filtration

Experimental Testing of Filter Materials for Two-Stage Inlet Air Systems of Internal Combustion Engines

Filtration efficiency analysis of fibrous filters: Experimental and theoretical study on the sampling of agglomerate particles emitted from a GDI engine

Virgin and recycled polyester filter media: effect of coating, calender roller pressure and roller temperature on dust filtration

Modulating the structural characteristics of layered nonwoven fabrics devised by fibre fineness for enhanced filtration performance

Investigation of Air Filter Properties of Flash-Spinning Nanofiber Non-Woven Fabric

Study on the Filtration Performance of the Baghouse Filters for Ultra-Low Emission as a Function of Filter Pore Size and Fiber Diameter

Energy efficient compressed air filtration: An experimental study on the effect of filters selection and configuration on pressure drop

Performance optimization of airliner cabin air filters

Development of air purifying curtain using activated charcoal embedded multilayer fabric for effective indoor air filtration