Abstract:During the damage and defects related to rolling contact fatigue (RCF), together with wear occurring at the rail surface, the microscopic characteristics of the rail material change with the accumulation of wheel cycles. To find the relationship between rail material characteristics and RCF damage under wheel-rail contact situations, a series of twin-disc rolling-sliding tests, based on real wheel-rail contact situations at a radius of 80 mm rail profile, was established for a heavy-haul railway in China. The microscale characteristics of the rail disc contact surface was researched, including crack, wear, roughness, and hardness of the U75V rail with different load cycles. The results show that the damage mechanism of RCF and wear alternately dominates the rail disc surface at the microscale, taking a certain cycle as a boundary which makes the RCF crack number and wear rate have opposite evolutionary trends. The above factors also affect the wear at the surface rail discs, alternating between fatigue and adhesion. Meanwhile, increasing the surface micro-hardness leads to a decrease in the relative wear rate and an increase in the roughness, length and number of RCF cracks. The plastic deformation layers, including the severely deformed layer (SDL) and the transition layer (TL), almost maintain the same thickness and the dynamic equilibrium increases during the cycles. Two kinds of cracks are initiated and propagated at the rail disc surface, one at the SDL and the other at the junction of SDL and TL. The number of each kind of crack depends on the SDL thickness.

Analysis on asymmetrical RCF cracks characterisation using an ACFM sensor and the influence of the rail head profile

Characterization of Rolling Contact Fatigue Cracks in Rails by Eddy Current Pulsed Thermography

Rail rolling contact fatigue formation and evolution with surface defects

Analysis of the RCF crack detection phenomenon based on induction thermography

Experimental study on wheel-rail rolling contact fatigue damage starting from surface defects under various operational conditions

RCF crack direction assessment in moving ferromagnetic material by DC electromagnetic NDT technique

Research on the damage mechanism of the rolling contact fatigue of a wheel–rail contact system under the influences of surface defects

Study on wear and rolling contact fatigue behaviours of defective rail under different slip ratio and contact stress conditions

Application of eddy current testing in the quantitative evaluation of the rail cracks

On the Formation and Damage Mechanism of Rolling Contact Fatigue Surface Cracks of Wheel/rail under the Dry Condition

Portray rail head surface crack 3D contour through image analysis and morphology reconstruction

Gaps, challenges and possible solution for prediction of wheel–rail rolling contact fatigue crack initiation

Evolution of microscopic characteristics of rolling contact fatigue coexisting with wear of U75V rail

Depth quantification of rolling contact fatigue crack using skewness of eddy current pulsed thermography in stationary and scanning modes

Nondestructive analysis of rolling contact fatigue cracks using induced scanning thermography

Rough surface rolling contact fatigue crack stress intensity factor calculation for modern rail steels

Prediction of Rolling Contact Fatigue Behavior in Rails Using Crack Initiation and Growth Models along with Multibody Simulations

Eddy Current Sensor Array for Electromagnetic Sensing and Crack Reconstruction with High Lift-Off in Railway Tracks

Study on acoustic emission properties and crack growth rate identification of rail steels under different fatigue loading conditions

Study on non-destructive testing of rail rolling contact fatigue crack based on magnetic barkhausen noise

Experimental characterization and numerical modeling on the external impacting of high-speed railway axle EA4T steel