Abstract:An increase in the integration of Inverter Based Resources (IBRs) to the electric grid, will lead to a corresponding decrease in the amount of connected synchronous generators, resulting in a decline in the available rotational inertia system-wide. This can lead to pronounced frequency deviations when there are disturbances and faults in the grid. This decline in available rotational inertia can be compensated for by fast acting IBRs participating in frequency response services, by rapidly injecting into or removing power from the grid. Currently, there are still relative small number of sizable IBRs in the grid. Therefore, the placement of the IBRs in the system, as well as the inverter configuration type and controller, will have a material impact on the frequency response of the grid. In this work, we present an optimal placement algorithm that maximizes the benefits of utilizing IBRs in providing frequency response services. That is, we minimize the overall system frequency deviation while using a minimal amount of electric power injection from the IBRs. The proposed algorithm uses the resistance distance to place the IBRs at nodes that are central to the rest of the nodes in the network thus minimizing the distance of power flow. The proposed greedy algorithm achieves a near optimal performance and relies on the supermodularity of the resistance distances. We validate the performance of the placement algorithm on three IEEE test systems of varying sizes, by comparing its performance to an exhaustive search algorithm. We further evaluate the performance of the placed IBRs on an IEEE test system, to determine their impact on frequency stability. The IBRs are configured in a grid-forming mode and equipped with a model predictive control (MPC)-based inverter power control.

Current Reference Optimization for Inverter-Based Resources to Mitigate Grid Voltage Unbalance Factor

Optimal Control Strategy of Voltage Source Converter-Based High-Voltage Direct Current under Unbalanced Grid Voltage Conditions

A review on current reference calculation of three-phase grid-connected PV converters under grid faults

Small Signal Stability Analysis of Grid-Following Inverter-Based Resources in Weak Grids with SVGs Based on Grid Strength Assessment

An Improved Virtual Inertia Control for Three-Phase Voltage Source Converters Connected to a Weak Grid

A Novel Current Control Strategy for Three-Phase Gird-Connected Inverters

Flexible Grid Connection Technique of Voltage Source Inverter under Unbalanced Grid Conditions Based on Direct Power Control

Current control optimization for grid-tied inverters with grid impedance estimation

Controlling Grid-Connected Inverters under Time-Varying Voltage Constraints

Voltage Unbalance Factor Reduction Method for Inverter-Based Resources Considering Active Power Constraint

A Review of Recent Requirements for Inverter-Based Resources and Grid-Forming Technologies

Distributed Optimization for Reactive Power Sharing and Stability of Inverter-Based Resources Under Voltage Limits

A Novel Fault Ride Through Strategy for Grid-Connected Virtual Synchronous Generators: Power Angle Stability Enhancement and Current Limiting

A reference compensation current control of grid-connected inverter for three-phase distributed generators

Predictive Current Control for Grid-Connected Inverters under Unbalanced Grid Voltage

Enhancing the Power Grid Small-Signal Stability Via Optimally Coordinating Inverter-Based Renewables

Optimal Inverter-Based Resources Placement in Low-Inertia Power Systems

Current Reference Control Scheme of Voltage Source Converters to Ensure the Existence of Stable Equilibrium Points during Grid Fault

Enhancing the Small-Signal Stability of Power Grids Via Optimally Coordinating Inverter-Based Resources

Model-Free Voltage Control for Inverter-Based Energy Resources: Algorithm, Simulation and Field Test Verification

An optimization based resilient control strategy for voltage unbalance compensation in grid connected microgrid system