Abstract:There is a growing interest in all-solid-state lithium batteries(ASLBs) for their safety and high energy density. However, the power density for ASLBs is still far away from satisfactory on the account of high interfacial resistance at electrode / solid electrolyte interface. For example, Garnet-type solid-state electrolytes (SSEs) are considered as a good choice for solid-state batteries, yet the interfacial issues with metallic Li limit their applications. In my group, we propose an ultra-simple and effective strategy to enhance the interfacial connection between garnet SSEs and Li metal just by drawing a graphite-based soft interface with a pencil[1]. Both experimental analysis and theoretical calculations confirm that the reaction between graphite-based interfacial layer and metallic lithium forms a lithiated connection interface with good lithium-ionic and electronic conductivity. Compared to the reported interfacial materials, the graphite material provides a soft interface with better ductility and compressibility. With the improvement by this soft interface, the impedance of symmetric Li cells significantly decreases from 1350 to 105Ωcm2 and the cell can cycle for over 1000hoursat a current density of 300 μA/cm2 at room temperature. Moreover, a solid-state battery with Li-metal anode, ternary cathode NCM523 and graphite-based interface modified garnet SSEs is fabricated and displays excellent rate capability and long cycling performance. In addition, LGPS-type materials show extremely high Li+ conductivity. But when in contact to Li metal, they can be reduced to produce Li2S, Li3P and Li-M alloy and form a mixed ionic and electronic conducting layer at the interface, which hinders the application of Li metal in such solid electrolyte system. We report on a simple approach for the modification of the interface between Li and Li10SnP2S12 sulfide solid electrolyte by utilizing ionic liquid[2]. Our study shows that the addition of 1.5M LiTFSI/Pyr13TFSI ionic liquid can not only promote intimate contact but can in-situ form a stable SEI layer at the interface between Li and solid electrolyte as well. A stable SEI layer instead of mixed conducting layer can prevent sulfide solid electrolyte from further decomposition and improve the cycle performance of batteries. References: 1) Y.J. Shao, H.C.Wang, et al ; ACS Energy Lett.; 2018, 3, 1212-1218 2) B.Z. Zheng; J.P.Zhu, et al; ACS Applied Mater. & Interfaces; 2018, 10, 25473-25482

AgF-PEO Composite Interfacial Layer for Electrolyte-Free LAGP-Based Lithium Metal Batteries

Bifunctional in Situ Polymerized Interface for Stable LAGP‐Based Lithium Metal Batteries

Stable Li|LAGP Interface Enabled by Confining Solvate Ionic Liquid in a Hyperbranched Polyanionic Copolymer for NASICON-Based Solid-State Batteries

Inorganic/polymer Hybrid Layer Stabilizing Anode/electrolyte Interfaces in Solid-State Li Metal Batteries

Lithium Dendrite Suppression and Enhanced Interfacial Compatibility Enabled by an Ex Situ SEI on Li Anode for LAGP-Based All-Solid-State Batteries

LiF involved interphase layer enabling thousand cycles of LAGP-based solid-state Li metal batteries with 80% capacity retention

A Polyethylene Oxide Based Electrolyte Enabled by the Synergistic Effect of Active LiGaO2 Filler and Ionic Liquid for Superior Lithium Metal Batteries

Smart construction of multifunctional Li1.5Al0.5Ge1.5(PO4)3|Li intermediate interfaces for solid-state batteries

Improving the Stability of Lithium Aluminum Germanium Phosphate with Lithium Metal by Interface Engineering

Construction of sticky ionic conductive buffer layer for inorganic electrolyte toward stable all-solid-state lithium metal batteries

Poly(ethylene Oxide)/poly(vinylidene FLuoride)/li6.4la3zr1.4ta0.6o12 Composite Electrolyte with a Stable Interface for High Performance Solid State Lithium Metal Batteries

(Invited) Construction of Flexible Interfacial Layer for Solid-State Li Batteries

Li+ Conduction in a Polymer/Li1.5Al0.5Ge1.5(PO4)3 Solid Electrolyte and Li-Metal/Electrolyte Interface

Novel Synergistic Coupling Composite Chelating Copolymer/lagp Solid Electrolyte with Optimized Interface for Dendrite-Free Solid Li-metal Battery

Boosting fast interfacial Li+ transport in solid-state Li metal batteries via ultrathin Al buffer layer

Interfacial Modification Between Argyrodite-Type Solid-State Electrolytes and Li Metal Anodes Using LiPON Interlayers

Boosting the Li|LAGP Interfacial Compatibility with Trace Nonflammable All‐fluorinated Electrolyte: the Role of Solid Electrolyte Interphase

An Advanced Gel Polymer Electrolyte for Solid-State Lithium Metal Batteries

Integrated Design of a Functional Composite Electrolyte and Cathode for All-Solid-State Li Metal Batteries

In-situ constructing of dual bifunctional interfacial layers of garnet-type Li6.4La3Zr1.4Ta0.6O12 solid electrolyte towards long-cycle stability for flexible solid metal lithium batteries

Stabilize Garnet/Electrode Interface via Low-melting Polymer Layer in Solid-state Lithium Metal Battery