Abstract:Engineering a stable solid electrolyte interphase (SEI) is one of the critical maneuvers in improving the performance of a lithium anode for high-energy-density rechargeable lithium batteries. Herein, we build a fluorinated lithium/sodium hybrid interphase via a facile electroless electrolyte-soaking approach to stabilize the repeated plating/stripping of lithium metal. Jointed experimental and computational characterizations reveal that the fluorinated hybrid SEI mainly consisting of NaF, LiF, LixPOyFz, and organic components features a mosaic polycrystalline structure with enriched grain boundaries and superior interfacial properties toward Li. This LiF/NaF hybrid SEI exhibits improved ionic conductivity and mechanical strength in comparison to the SEI without NaF. Remarkably, the fluorinated hybrid SEI enables an extended dendrite-free cycling of metallic Li over 1300 h at a high areal capacity of 10 mAh cm–2 in symmetrical cells. Furthermore, full cells based on the LiFePO4 cathode and hybrid SEI-protected Li anode sustain long-term stability and good capacity retention (96.70% after 200 cycles) at 0.5 C. This work could provide a new avenue for designing robust multifunctional SEI to upgrade the metallic lithium anode.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/jacs.0c12051?goto=supporting-info">https://pubs.acs.org/doi/10.1021/jacs.0c12051</a>.Additional experimental details, XRD, SEM, EDS, XPS, FTIR, TEM, AFM, discharge/charge profiles, and electrochemical impedance results (<a class="ext-link" href="/doi/suppl/10.1021/jacs.0c12051/suppl_file/ja0c12051_si_001.pdf">PDF</a>)Video recording the morphological evolution and stability test of different electrodes (<a class="ext-link" href="/doi/suppl/10.1021/jacs.0c12051/suppl_file/ja0c12051_si_002.mp4">MP4</a>)Video recording the morphological evolution and stability test of different electrodes (<a class="ext-link" href="/doi/suppl/10.1021/jacs.0c12051/suppl_file/ja0c12051_si_003.mp4">MP4</a>)Video recording the morphological evolution and stability test of different electrodes (<a class="ext-link" href="/doi/suppl/10.1021/jacs.0c12051/suppl_file/ja0c12051_si_004.mp4">MP4</a>)This article has not yet been cited by other publications.

Boosting the Li|LAGP Interfacial Compatibility with Trace Nonflammable All‐fluorinated Electrolyte: the Role of Solid Electrolyte Interphase

Lithium Dendrite Suppression and Enhanced Interfacial Compatibility Enabled by an Ex Situ SEI on Li Anode for LAGP-Based All-Solid-State Batteries

Boosting fast interfacial Li+ transport in solid-state Li metal batteries via ultrathin Al buffer layer

Smart construction of multifunctional Li1.5Al0.5Ge1.5(PO4)3|Li intermediate interfaces for solid-state batteries

Improving the Stability of Lithium Aluminum Germanium Phosphate with Lithium Metal by Interface Engineering

Boosting the Performance of Lithium Batteries with Solid-Liquid Hybrid Electrolytes: Interfacial Properties and Effects of Liquid Electrolytes

SnF2-Catalyzed Lithiophilic-Lithiophobic Gradient Interface for High-Rate PEO-Based All-Solid-State Batteries

Interfacial Fluoride Engineering Enabled Robust LiF-rich Solid Electrolyte Interphase to Reduce Active Lithium Loss in Rechargeable Lithium Battery

Inorganic Composition Modulation of Solid Electrolyte Interphase for Fast Charging Lithium Metal Batteries

Stable Li–Metal Batteries Enabled by in Situ Gelation of an Electrolyte and In-Built Fluorinated Solid Electrolyte Interface

In situ construction of a multifunctional interlayer for garnet-type electrolytes to suppress lithium dendrite formation in solid-state lithium batteries

Achieving Higher Critical Current Density in LGPS-Based Lithium Metal Batteries via a Synergistic Interlayer for Physical Inhibition and Chemical Scavenging of Lithium Dendrites

Fluorinated Interface Layer with Embedded Zinc Nanoparticles for Stable Lithium-Metal Anodes.

High Interfacial-Energy Interphase Promoting Safe Lithium Metal Batteries.

LiF involved interphase layer enabling thousand cycles of LAGP-based solid-state Li metal batteries with 80% capacity retention

Safe LAGP-based all solid-state Li metal batteries with plastic super-conductive interlayer enabled by in-situ solidification

Fast and Stable Charge Transfer at Lithium-Sulfide (Electrolyte) Interface via In-Situ Solidified Li+-Conductive Interlayer

Fluorinating Solid Electrolyte Interphase by Regulating Polymer–Solvent Interaction in Lithium Metal Batteries

In Situ Formed Protective Layer: Toward a More Stable Interface between the Lithium Metal Anode and Li 6 PS 5 Cl Solid Electrolyte

Electroless Formation of a Fluorinated Li/Na Hybrid Interphase for Robust Lithium Anodes

High‐Performance Garnet‐Type Solid‐State Lithium Metal Batteries Enabled by Scalable Elastic and Li+‐Conducting Interlayer