Abstract:Anisotropic materials have garnered significant attention due to their potential applications in cargo delivery, surface modification, and composite reinforcement. Crystallization-driven self-assembly (CDSA) is a practical way to access anisotropic structures, such as 2D platelets. Living CDSA, where platelets are formed by using seed particles, allows the platelet size to be well controlled. Nonetheless, the current method of platelet preparation is restricted to low concentrations and small scales, resulting in inefficient production, which hampers its potential for commercial applications. To address this limitation, continuous flow reactors were employed to improve the production efficiency. Flow platforms ensure consistent product quality by maintaining the same parameters throughout the process, circumventing batch-to-batch variations and discrepancies observed during scale-up. In this study, we present the first demonstration of living CDSA performed within flow reactors. A continuous flow system was established, and the epitaxial growth of platelets was initially conducted to study the influence of flow parameters such as temperature, residence time, and flow rate on the morphology of platelets. Comparison of different epitaxial growth manners of seeds and platelets was made when using seeds to perform living CDSA. Size-controllable platelets from seeds can be obtained from a series flow system by easily tuning flow rates. Additionally, uniform platelets were continuously collected, exhibiting improved size and dispersity compared to those obtained in batch reactions.

Continuous Synthesis of Calcium Hydrogen Phosphate Dihydrate (DCPD) in an Annular Rotating Flow Loop Reactor

Direct ink writing of Pd-Decorated Al<sub>2</sub>O<sub>3</sub> ceramic based catalytic reduction continuous flow reactor

Coaxial 3D Printed Al2O3 Ceramic Continuous-Flow Fixed-Bed Reactor with Bionic Core-Shell Structure

Hydrodynamic Instability Analysis of the Axial Flow Pump in an Ethylene Polymerization Loop Reactor

Preparation of inorganic salt particles by reactive crystallization in an annular swirling flow reactor

New process for phosphorus removal with the combination of biological medium addition and calcium hydroxyphosphate crystallization

A Rotation Fluidization Coupled Atomic Layer Deposition Reactor for Nanoparticle Coating

Synthesis of nano precipitated calcium carbonate by using a carbonation process through a closed loop reactor

Enhancing the Scalability of Crystallization-Driven Self-Assembly Using Flow Reactors

High Throughput Methodology for Continuous Preparation of Hydroxyapatite Nanoparticles in A Microporous Tube-In-Tube Microchannel Reactor

Droplet Reactor System That Can Be Automated for the Continuous and Scalable Production of Noble-metal Nanocrystals.

Hydrodynamic Behavior of Three-Phase Airlift Loop Slurry Reactor

An Optimized Miniaturized Annular Rotating Flow Reactor for Controllable Continuous Preparation of Functionalized Polysilsesquioxane Microspheres

From Batch to Continuous Small-Scale Production of Particles: Mixer Design Methodology for Robust Operation

Hydrodynamics and mass transfer in a slurry external airlift loop reactor integrating mixing and separation

Controlled crystallization of hierarchical and porous calcium carbonate crystals using polypeptide type block copolymer as crystal growth modifier in a mixed solution

An effective synthesis of bio-based pentamethylene diisocyanate in a jet loop reactor

Controllable Preparation of Microscale Tubes with Multiphase Co-Laminar Flow in a Double Co-Axial Microdevice

Novel multiphase loop reactor with improved aeration prevents excessive foaming in Rhamnolipid production by Pseudomonas putida

In Situ Grafting Polyethylene Glycol Chains Onto Amorphous Calcium Phosphate Nanoparticles to Improve the Storage Stability and Organic Solvent Redispersibility

Effect of PEG Amount in Amorphous Calcium Phosphate on Its Crystallized Products