Abstract:Medium-frequency transformer (MFT) is an essential device in the smart solid-state transformer (SST) prototype. Compared with the well-defined principle design of magnetic core and windings in MFT, insulation issues are barely concerned. This article focuses on improved design optimization of an MFT, considering the main insulation strength and structure. Dielectric breakdown characteristics of epoxy resin insulating material were studied. An obvious reduction of dielectric strength occurred at high frequency and high temperature in thick samples, which is used for the design of insulation clearance and margin. Moreover, a modified insulation loss evaluation was used, involving the square wave with spike voltages. Through introducing a strategy of multilayered insulation in the windings, the insulation structure is optimized. A 10-kW, 10-kHz, 1-kV/750-V MFT used in the 10-kV SST system was designed by considering the insulation research. Finally, experimental verifications of the MFT performance were carried out by a resonant dc–dc converter. It appears that the optimized MFT exhibits low electric field, small temperature rise, and high efficiency at a 10-kW load. This research provides the basic principles for insulation design in high-voltage and high-power MFT.

A 10kw/200khz PCB-Winding Transformer with High Insulation Voltage for Solid-State Transformer Applications

A Soft-Switching Solid-State Transformer Module

A novel PCB winding transformer with controllable leakage integration for a 6.6kW 500kHz high efficiency high density bi-directional on-board charger

A WBG based three phase 12.5 kW 500 kHz CLLC resonant converter with integrated PCB winding transformer

Design and experiment of a zero-voltage-switching module for bidirectional DC solid-state transformer

Design and Testing of a Medium Frequency Transformer

High-voltage High-Frequency Transformer Design for a 7.2kv to 120V/240V 20kva Solid State Transformer

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

High Power Density 48–12 V DCX with 3-D PCB Winding Transformer

Design And Demonstration Of A Sic-Based 800-V/10-Kv 1-Mw Solid-State Transformer For Grid-Connected Photovoltaic Systems

A High Power Density 48V-12V DCX with 3-D PCB Winding Transformer

An Improved Design Procedure for A 10 Khz, 10 Kw Medium-Frequency Transformer Considering Insulation Breakdown Strength and Structure Optimization

Design of a High-Voltage-Insulation and High-Efficiency Medium Frequency Transformer

Design and Optimization of the Insulation of Medium-voltage Medium-frequency Transformers for Solid-state Transformers

270 Kva Solid State Transformer Based on 10 Kv SiC Power Devices

Design of a 200 kW Medium-Frequency Transformer (MFT) With High Insulation Capability

A High Power 200kW Medium Frequency Transformer With Improved Thermal Management

Design and hardware implementation of Gen-1 silicon based solid state transformer

Modeling and Design of Insulation Structure for High Power Density Medium Voltage High-Frequency Transformers

A Novel High Insulation 100 Kw Medium Frequency Transformer

Design and Optimization of High Insulation Voltage Planar Transformer for DC-DC Converters