Abstract:The power module is one of the main heating sources with non-uniform heat flux in high-power electrical servo systems used for flight vehicles. Faults in the power module are usually caused by a high or a non-uniform temperature. Given the environment of heat dissipation during flight, a regenerative cooling method is typically used, and the cooling system is designed as a microchannel heat sink with supercritical fuel. This is an effective means of solving thermal problems in the flight vehicles. However, because of the high heating power and non-uniform heat distribution of the power module, it is necessary to optimize its heat sink to restrict the high temperature rise and suppress the non-uniform distribution of temperature. In light of these considerations, a 3D numerical model of the microchannel heat sink of a power module with non-uniform heat flux was established in this study to examine the heat transfer and the thermal performance of the cooling channels. Based on the validation of the mesh and numerical method, the simulations of the flow distributions of the channels were performed to assess the thermal performance of the heat sink. It included investigating the effects of the inlet location of the manifold and its injection angle on the flow distribution in the channels, and the influences of the flow distribution and the operational parameters on the thermal performance of the heat sink. The results revealed that the Z30 configuration provided the best location and injection angle of the inlet to match the non-uniform heat flux of the power module. In this case, the values of Stanton number and buoyancy parameter of channel 4 yielded the minimum values of all channels owing to its higher flow rate and gradual rise in temperature. The deviation in the rate of mass flow Φ changed slightly corresponding to the various operational parameters, only the total heat flux would bring a bigger fluctuation. The tiny difference in temperatures among the observation areas on the substrate verified the positive influence of the flow distribution in matching the non-uniform heat flux.

A Jet Impingement Cooling Method to Mitigate the Inherent Uneven Temperature of Multi-chips in Power Modules

Analytical Modeling of Forced-Air Cooling Heatsink by Considering Air Temperature Rise in Channel and Coupling of Multiple Heat Sources

Comprehensive Thermal Resistance Model of Forced Air Cooling System for Multiple Power Chips

Thermal Modeling and Comparative Analysis of Jet Impingement Liquid Cooling for High Power Electronics

Addressing Thermal Management Concerns for a Power Electronics Module Using an Integrated Micro-Cooling Chip Array Scheme

A Novel Approach to Model and Analyze Uneven Temperature Distribution Among Multichip High-Power Modules and Corresponding Method to Respecify Device SOA

A Method to Minimize Junction Temperature Difference of Dies in Multichip Power Modules

An Immersed Jet Array Impingement Cooling Device with Distributed Returns for Direct Body Liquid Cooling of High Power Electronics

Double-sided heat dissipation numerical modeling of an embedded half-bridge power module with multiple chips

A Highly Efficient Integrated Silicon-Microchannel Cooler for Multi-Module Electronic Microsystems: Model Design, Optimization, and Performance Validation

Analytical Modeling of Air-Cooling System for Multiple Discrete Device Parallel Converter

Numerical Investigations of Heat Transfer in Hybrid Microchannel Heat Sink with Multi-Jet Impinging and Trapezoidal Fins

Jet Microchannel with Sawtooth Wall for Efficient Cooling of High-Power Electronics

High performance cooling system for automotive inverters

Characteristics analysis and structure optimization of a hybrid micro-jet impingement/micro-channel heat sink

Study on the uneven flow distribution and non-uniform heat transfer in microchannels

Design of Microchannel Heat Sink Using Topology Optimization for High Power Modules Cooling

Heat Dissipation Characteristics of a Jetting Staggered Microchannel for Cooling a Large-area High-performance SOC Chip

Impact of Jet Intermittency on Surface-Structured Heat Sinks for Electronics Liquid Cooling

Experimental Study on Cooling Performance of a Hybrid Microchannel and Jet Impingement Heat Sink

A Compact Jet Array Impingement Cooling System Driven by Integrated Piezoelectric Micropump