Experimental Investigation on Transpiration Cooling of Ammonium Carbonate in Porous Composite Structure at High-Temperature

Fei Wang,Nianduo Song,Xinlin Xia,Xue Chen

DOI: https://doi.org/10.1016/j.applthermaleng.2024.123292

IF: 6.4

2024-01-01

Applied Thermal Engineering

Abstract:This paper presents and experimental investigation of a novel transpiration cooling concept using ammonium carbonate as the solid coolant. Ammonium carbonate is a promising solid transpiration coolant with stable physicochemical properties at room temperature, high heat absorption by decomposition, and no solid residual after decomposition. In order to enhance the load-bearing properties of the thermal protection structure, alumina and zirconia ceramic foams with high porosity and large pore size were used as the coolant carrier, and the foam layer could still provide thermal insulation capacity after the coolant was exhausted. The transpiration cooling experiment were conducted with a stainless-steel wire mesh porous panel as the heated surface of the cooling structure within the high-temperature radiant apparatus, and the cooling performance was compared with that of hydrogel and a passive thermal protection structure. The results indicated that the thermal protection effect using the transpiration cooling technique has a significant advantage over the passive thermal protection method. The maximum cooling efficiencies of the ammonium carbonate cooling structure were up to 6.5 % and 33.7 % for the surface and bottom, respectively. In the transpiration cooling system without coolant injection force, the addition of a thin foam layer can extend the cooling time of ammonium carbonate from 981 s to 1800 s. However, this approach is detrimental to the cooling performance of the hydrogel. Influenced by the huge heat absorption of ammonium carbonate, the difference in heat transfer between alumina and zirconia foams within the cooling structure can be negligible.