Abstract:SiC particle–reinforced Al metal matrix composites (SiCp/Al) are typical difficult-to-machine materials due to the heterogeneous constituent. In order to explore the material removal mechanism in fixed abrasive polishing (FAP), polishing experiments were performed on SiCp/Al at 15 rpm and 35 rpm respectively, and surface integrity, including surface damage and material removal forms, was evaluated to explore the effects of different polishing speeds on it. The results indicate that high-speed polishing at 35 rpm may result in better surface quality. The polished SiC surface changes from a concave cavity to a fish scale shape, and the removal form of SiC particles changes from whole extraction and brittle fracture to ductile removal. A removal model for SiCp/Al in consolidated abrasive polishing was established, and the material removal mechanism was revealed. Simulate the removal of SiC particles at different depths using molecular dynamics simulation. We find dislocations will generate not only at the polishing region but also at the SiC–Al interface. Moreover, the motion of dislocations is obstructed by the nanoparticles, resulting in accumulation of dislocations between the tool and particles. Furthermore, it was found that the removed silicon carbide particles exhibited three-body wear during low-speed polishing, while they turned into two-body wear during high-speed polishing. Material removal rate (MRR) data showed that the standard deviation was reduced by 80% when switching from low-speed to high-speed polishing. This significant decrease underscores that high-speed polishing helps to improve SiCp/Al surface quality. Our researches benefit to understand the mechanical removal mechanism of SiCp/Al substrates and give theoretical guide for improving the machining technology of FAP.

Investigate on Material Removal of 3C-Sic Crystals in Nano-Polishing Via Molecular Dynamics

Atomic Simulations of Deformation Mechanism of 3C-SiC Polishing Process with a Rolling Abrasive

Wear mechanism in nano polishing of SiCp/Al composite materials using molecular dynamics

Molecular Dynamics Simulations of Nano Grinding of Silicon Carbide (Sic)

A Numerical Analysis of Ductile Deformation during Nanocutting of Silicon Carbide via Molecular Dynamics Simulation

Effects of three-body diamond abrasive polishing on silicon carbide surface based on molecular dynamics simulations

Molecular dynamics analysis of subsurface brittleness mechanism of nanocrystalline 3C-SiC rough friction surface

Nano and Sub-nano Scale Friction Behavior in Rotary Processing of 6H-Sic with Different Off-Axis Angles

Molecular simulation of ultrasonic assisted diamond grit scratching 4H-SiC single-crystal

Surface Characteristics and Material Removal Mechanisms During Nanogrinding on C-face and Si-face of 4H-Sic Crystals: Experimental and Molecular Dynamics Insights

A Study of Ultraprecision Mechanical Polishing of Single-Crystal Silicon with Laser Nano-Structured Diamond Abrasive by Molecular Dynamics Simulation

Mechanical removal of SiC by multi-abrasive particles in fixed abrasive polishing using molecular dynamics simulation

Mechanism of chemical and mechanical mutual promotion in photocatalysis-assisted chemical mechanical polishing for single-crystal SiC

Tribochemical mechanisms of abrasives for SiC and sapphire substrates in nanoscale polishing

Material Removal Mechanism Of Nanoparticle Colloid Jet Polishing Based On Molecular Dynamics Simulation

Material removal and wear mechanism in abrasive polishing of SiO2/SiC using molecular dynamics

Nano-grinding Process of Single-Crystal Silicon Using Molecular Dynamics Simulation: Nano-grinding Parameters Effect

The effects of polycrystalline 3 C-SiC with different roughness coefficients on the crystal structure of nano-grin ding based on molecular dynamics

Molecular dynamics study of the removal mechanism of SiC in a fixed abrasive polishing in water lubrication

Impact of multiple abrasive particles on surface properties of SiC: A molecular dynamics simulation study

Understanding of the effect of wear particles removal from the surface on grinding silicon carbide by molecular dynamics simulations