Abstract:Climate change issues and acid rain episodes have triggered new research directions and the conceptualization of new preventive approaches to reduce toxic gases from entering the environment. The reduction of carbon dioxide (CO2) levels in the indoor environment are also one of the challenging human safety issues during emergency incidents and rescues; for instance, a building fire. The use of an activated carbon fiber (ACF) based mask is not only effective to filter CO2 but it is also practically easy to use during such demanding situations. Such modified adsorbents will have high adsorption volume, fast adsorption rates and good thermal, acid and alkaline resistance properties. For the emergency mode considering fires, the major task is atmospheric recovery. Thus, CO2 concentration in the post-fire smoke could be high. The smoke in the room causes suffocations and unconsciousness leading to fatal injuries. In this study, ACF was modified using copper nitrate trihydrate [Cu (NO3)2 .3H2O] by impregnation and carbonization (450°C), followed by its characterization. The modified ACF (Cu-ACF-12) showed large surface area (1147m2 g−1), high micropore volume (0.45cm3 g−1) and an average pore size of 1.57nm. CO2 removal tests were carried out in a lab scale fixed bed adsorption column using the modified ACF. The process parameters were optimized based on a Box-Behnken Design (BBD) and tested in the following ranges: gas flow rate – 150–250mlmin−1, moisture content – 0–40% and modification of the ACF impregnated with copper (Cu) – 4–12wt.%. The experimental results were statistically interpreted to elucidate the main and interaction effects. The modification of ACF showed positive effects on CO2 removal, while gas flow rate and moisture content decreased the CO2 removal. Under the optimal conditions, (gas flow rate – 150mlmin−1, moisture content – 0% and modification of the ACF – 8%), CO2 removal capacity of 2.31mmol of CO2 g−1 Cu-ACF was obtained.

The influence of activated carbon fiber paper structure on adsorption performance of cyclohexane

Study on modification of carbon fiber and performance of carbon paper as gas diffusion layer

Effect of beating degree of fiber on the development of porosity in polyacrylonitrile-based activated carbon fiber paper

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Adsorption of Volatile Organic Compounds on Activated Carbon Fiber Prepared by Carbon Dioxide

Effect analysis of pore wall thickness, pore size, and functional group of activated carbon on adsorption behavior based on molecular simulation

Correlations and Prediction of Adsorption Capacity and Affinity of Aromatic Compounds on Activated Carbons

The Separation of Chloromethane Mixtures and the Recovery of Dichloromethane, Chloroform and Carbon Tetrachloride by Activated Carbon Fibre

Adsorption of trace polar methy-ethyl-ketone and non-polar benzene vapors on viscose rayon-based activated carbon fibers

Preparation of pitch-based activated carbon fibers with high specific surface area and excellent adsorption properties

Molecular simulation of the effects of activated carbon structure on the adsorption performance for volatile organic compounds in fumes from gasoline

Effect of process parameters influencing the chemical modification of activated carbon fiber for carbon dioxide removal

Activated Carbon Powders from Wool Fibers

INFLUENCE OF CARBONIZATION ON PORE STRUCTURE AND METHANE ADSORPTION BEHAVIOR OF ACTIVATED CARBON

Exploration of the adsorption and desorption performance of volatile organic compounds by activated carbon with different shapes based on fixed-bed experiments

Activated carbon fiber: Fundamentals and applications

Preparation, characterization and adsorption performance of high surface area biomass-based activated carbons

STUDY ON THE TREATMENT OF TOLUENE CONTAMINATED GAS BY ACTIVATED CARBON FIBER

Gas Phase Trichloroethylene Removal at Low Concentration Using Activated Carbon Fiber.

Adsorption Models and Structural Characterization for Activated Carbon Fibers

Impact Factors of Benzenes Adsorption by Activated Carbon Fiber