Abstract:Coal solid waste (CSW) was explored as precursor to prepare porous adsorption material (ACSW) by carbon dioxide activation. The effects of activation method (direct activation and pre-carbonization followed by activation), activation temperature, and activation time were systematically investigated. The burn-off characteristics of the CSW were measured, the ACSW were characterized by field emission scanning electron microscope, gas adsorption instrument and Raman spectrometer, and, in parallel, the adsorption ability was studied using methylene blue (MB) as a typical pollutant. The results showed that compared with direct activation, pre-carbonization reduced the carbon loss, increased the pore volume with pore size less than 1 nm, improved the carbon structural order and increased the MB adsorption performance. In addition, the evolution of the structure of the ACSW strongly depended on the activation temperature and time. With the increase of the activation time, the pore structure evolution underwent three stages: pore forming, expanding, and collapsing. Pore forming mainly involved clearing scattered graphite structures and amorphous carbon. Pore expanding mainly relies on consumption of regular graphite carbon crystal structure. At low temperature of 800 °C, micropores fully developed. As the activation temperature increased to 850–900 °C, pore expansion became apparent, mainly forming pores of 1–5 nm. Moreover, the MB adsorption capacity was positively correlated with the pore volume with pore size less than 5 nm. The burn-off can serve as an indicator for evaluating pore structure and the adsorption performance and when it was ∼25.5 %, the ACSW had the largest pore volume with pore size less than 5 nm and the highest MB adsorption capacity.

INFLUENCE OF CARBONIZATION ON PORE STRUCTURE AND METHANE ADSORPTION BEHAVIOR OF ACTIVATED CARBON

Adsorption of propylene and ethylene on 15 activated carbons

Influence of Tectonically Deformed Coal-Based Activated Carbon and Its Surface Modification on Methane Adsorption

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Synthesis of micro-mesoporous hierarchical structure of coal-based activated carbon and its effect on methane adsorption

Effect analysis of pore wall thickness, pore size, and functional group of activated carbon on adsorption behavior based on molecular simulation

Dynamical Characteristics of Methane Adsorption on Monolith Nanometer Activated Carbon

Effect of Pore Structure on SO2Removal by Activated Carbons

Influence of pore structure of granular activated carbon prepared from anthracite on the adsorption of CO2, CH4 and N2

AN INVESTIGATION ON PREPARATION OF ACTIVATED CARBON FROM HAW- STONE RESIDUE

Effect of Porosity Parameters and Surface Chemistry on Carbon Dioxide Adsorption in Sulfur-Doped Porous Carbons

Study on the preparation of high value-added activated carbon from petroleum coke: Comparison between one- and two-step methods for carbonization and activation

Preparation of porosity-adjustable porous adsorbent materials derived from coal solid waste

Surface Modification of Activated Carbon for Siloxane Adsorption

Tuning porosity of coal-derived activated carbons for CO2 adsorption

Preparation, characterization and adsorption performance of high surface area biomass-based activated carbons

Effect of supercritical CO2 saturation pressures and temperatures on the methane adsorption behaviours of Longmaxi shale

Influence of Pore Structure Characteristics of Primary Coal on Coalbed Methane Adsorption

The effect of pretreatment on the adsorption efficiency of activated carbon

Effect of Structural and Compositional Alterations on the Adsorption and Selectivity of CO2 in Hazelnut Shell-Derived Activated Carbons

Effect of Surface Area and Micropore Volume of Activated Carbons from Coal by KOH, NaOH and ZnCl2 Treatments on Methane Adsorption