Abstract:Gibbs adsorption and Zener pinning induced by MgB2 decomposition are proven to inhibit grain growth for enhancing mechanical properties and cutting processibility of Bi2Te3‐based alloys with improved thermoelectric performance. An average figure of merit of 1.1 within 300–473 K can be obtained in (Bi0.4Sb1.6Te3)0.97(MgB2)0.03, and an energy conversion efficiency of 4.2% at a temperature difference of 215 K can be achieved in an eight‐pair device. Bi2Te3‐based alloys have great market demand in miniaturized thermoelectric (TE) devices for solid‐state refrigeration and power generation. However, their poor mechanical properties increase the fabrication cost and decrease the service durability. Here, this work reports on strengthened mechanical robustness in Bi2Te3‐based alloys due to thermodynamic Gibbs adsorption and kinetic Zener pinning at grain boundaries enabled by MgB2 decomposition. These effects result in much‐refined grain size and twofold enhancement of the compressive strength and Vickers hardness in (Bi0.5Sb1.5Te3)0.97(MgB2)0.03 compared with that of traditional powder‐metallurgy‐derived Bi0.5Sb1.5Te3. High mechanical properties enable excellent cutting machinability in the MgB2‐added samples, showing no missing corners or cracks. Moreover, adding MgB2 facilitates the simultaneous optimization of electron and phonon transport for enhancing the TE figure of merit (ZT). By further optimizing the Bi/Sb ratio, the sample (Bi0.4Sb1.6Te3)0.97(MgB2)0.03 shows a maximum ZT of ≈1.3 at 350 K and an average ZT of 1.1 within 300–473 K. As a consequence, robust TE devices with an energy conversion efficiency of 4.2% at a temperature difference of 215 K are fabricated. This work paves a new way for enhancing the machinability and durability of TE materials, which is especially promising for miniature devices.

Understanding of Isoelectronic Alloying Induced Energy Gap Variation for a Large Enhancement of Thermoelectric Power Factor

High performance of Mg3Bi1.5Sb0.5 based materials for power generation: Revealing the counter-intuitive effect of tuning Bi content on the thermoelectric properties

Improving Thermoelectric Performance Of Alpha-Mgagsb By Theoretical Band Engineering Design

Band structure engineering of multiple band degeneracy for enhanced thermoelectric power factors in MTe and MSe (M = Pb, Sn, Ge)

Valence Band Modification and Enhanced Phonon‐Phonon Interactions for High Thermoelectric Performance in GeTe

Bi-Deficiency Leading to High-Performance in Mg3 (Sb,Bi)2 -Based Thermoelectric Materials

Gibbs Adsorption and Zener Pinning Enable Mechanically Robust High‐Performance Bi2Te3‐Based Thermoelectric Devices

Bi-Deficiency Leading to High-Performance in Mg<sub>3</sub>(Sb,Bi)<sub>2</sub>-Based Thermoelectric Materials

Achieving ultra-high power factor in Sb2Te2Se via valence band convergence

Regulation of exciton for high thermoelectric performance in (Bi, Sb)2Te3 alloys via doping with Pb and multi-scale microstructure

Synergy of grain size and texture effect for high-performance Mg3Sb2-based thermoelectric materials

Giant Band Degeneracy via Orbital Engineering Enhances Thermoelectric Performance from Sb2Si2Te6 to Sc2Si2Te6

Topological Electronic Transition Contributing to Improved Thermoelectric Performance in p-Type Mg3Sb2- xBix Solid Solutions

Electronic Orbital Alignment and Hierarchical Phonon Scattering Enabling High Thermoelectric Performance P-Type Mg3Sb2 Zintl Compounds

Effect of Composition Adjustment on the Thermoelectric Properties of Mg3Bi2-Based Thermoelectric Materials

BiSbTe alloy with high thermoelectric and mechanical performance for power generation

Thermoelectric Performance of Cu 8 SiS 6 with High Electronic Band Degeneracy

High thermoelectric power factor through topological flat bands

Thermoelectric Performance of Sb2Te3-Based Alloys is Improved by Introducing PN Junctions.

Sb Alloying for Engineering High‐Thermoelectric Zt of CuGaTe2

Achieving High-Performance Ge<sub>0.92</sub>Bi<sub>0.08</sub>Te Thermoelectrics via LaB<sub>6</sub>-Alloying-Induced Band Engineering and Multi-Scale Structure Manipulation