Abstract:In this paper, a bi-directional-buck-boost-converter-based active equalizer is developed. The energy between adjacent cells can be transferred bi-directionally by manipulating the balancing current to solve the unbalanced problem in a battery module. It is noted that the conduction time of the main switch in the conventional buck-boost equalizer is fixed. Thus, the balancing current will diminish as the voltage difference of the adjacent cells decreases, which results in a prolonged equilibrium period. This paper has proposed two methods, namely, the varied-on-time (VOT) method and the voltage ratio modulation (VRM) method, to shorten the equilibrium period. In the VOT method, the conduction time of the main switch is determined according to high state-of-charge (SOC) cell voltage. In this way, the balancing current is able to be kept at the desired level rather than reduced during the balancing process. On the other hand, the VRM method computes the proportion of the conduction time and the cut-off time in a switching cycle based on the voltages of adjacent cells. Hence, the equalizer can deliver the maximum energy in a switching period and shorten the equilibrium period. The simulation platform and experiments with four batteries connected in serial are carried out to verify the proposed control methods. According to the experimental results, the VOT method saves 10.3%, 11.7%, and 16% of the equilibrium time compared with the fixed duty cycle (FDC) method. The VRM method can shorten 35.9%, 36.6%, and 37.3% of the equilibrium time compared with the FDC method.

A Galvanic-Isolated Automatic Equalization Charging System for Series-Connected Cells or Battery Strings

Design Of Equalization Circuit For Series-Connected Batteries

Design and realization of active equalizer for lithium battery string

A Unitized Multiwinding Transformer-Based Equalization Method for Series-Connected Battery Strings

A Novel Charge and Discharge Equalization Scheme for Battery Strings

A high efficiency isolated bidirectional equalizer for Lithium-ion battery string

An Equalization Current Ripple Cancellation (ECRC) Converter-Based Centralized Equalization System for Series-Connected Battery Strings

Bidirectional Constant Current String-to-Cell Battery Equalizer Based on L2C3 Resonant Topology

A New Sort of Equalization Circuit Based on Coupled Inductors for Series-connected Battery Strings

Active Vehicle Battery Equalization Scheme in the Condition of Constant-Voltage/Current Charging and Discharging

A multi-winding transformer-based active cell equalizer with self-driven switches for series-connected lithium-ion batteries and super-capacitors

A crossed pack-to-cell equalizer based on quasi-resonant LC converter with adaptive fuzzy logic equalization control for series-connected lithium-ion battery strings

Comparison And Evaluation Of Charge Equalization Technique For Series Connected Batteries

A Modularized Charge Equalizer Using a Battery Monitoring IC for Series-Connected Li-Ion Battery Strings in Electric Vehicles

A charging equalizer based on zeta converter for hybrid energy storage system

A Double-Switch Single-Transformer Integrated Equalizer for the Recycled Power Battery String of Automatic Guided Vehicles

A high efficiency equalizer based on forward converter for series connected battery string

Development of an Active Equalizer for Lithium-Ion Batteries

An any-cell(s)-to-cell(s) equalization method with a single magnetic component for Lithium-ion battery pack

A Unified Control Strategy for Inductor-Based Active Battery Equalisation Schemes

Equalization Design of Series Connected Li-ion Battery Pack Based on Microcontroller