Abstract:Tubesheet-flanged joint is usually used in some situations for its detachability, such as some small scale heat exchangers. This type of structure is convenient for maintenance. But leakage will become a major failure mode for flanged joint, especially for heat exchangers with multiple passes. Temperature gradient of different passes may cause non-axisymmetric thermal loading, stress and deformation distribution. In this paper, a detailed three dimensional finite element model of a tubesheet-flanged joint of an oil-water heat exchanger is established with a flexible graphite metallic spiral wound gasket. This kind of gasket has a good compression resilience performance. The compression-unloading curve of gasket under different temperatures are used. The stress and temperature distribution of the joint and gaskets are simulated under preload condition, pressure condition and operation condition. The seating performance are evaluated using gasket compression stress and flange stiffness criteria. The results show that the gasket compression stress distributions under preload and pressure condition are similar. Under operation condition, the gasket compression stress in local area decreases significantly and the gasket compression stress distribution along the circumferential direction becomes non-uniform because of different pass temperature. The Taylor-water method, typically used for flange design, provides a design bolt load for sizing the bolt and flange, does not provide an explicit calculation for the assembly bolt load. At some locations the compression stress is much smaller than minimum seating stress using Taylor-water method to determine bolt preload. However, under preload of half bolt yield strength recommended by ASME PCC-1, all assessment parameters are within the allowable limits.

Effect of Operating Temperature on the Performance of Expansion Joints Between Tube and Tube Plate

Experimental Investigation and Elastic-Plastic Analysis on Connection Strength of Zirconium Tube-Tubesheet Joints

Numerical Study on Thermal Performance of a BOG Heat Exchanger in the Inclined Condition

Experimental Investigation on Rubber-Expanded Tube-to-Tubesheet Joints of Zr Heat Exchangers

Thermo-Mechanical Coupling Computation and Warping Analysis During Controlled-Cooling of X65 Heavy Pipeline-Plate

Combined Effect of Tungsten Inert Gas Welding and Roller Expansion Processes on Mechanical and Metallurgical Characteristics of Heat Exchanger Tube-To-Tubesheet Joints

Study on Mechanical Behavior of Expanding Tube-to Tubesheet and Joint Performance for Steam Generator of Nuclear Power

Modeling Hydraulically Expanded Tube-To-Tubesheet Joint Based on General Stress-Strain Curves of Tube and Tubesheet Materials

Sealing Evaluation of Tubesheet-Flanged Joint under Internal Pressure and Non-Axisymmetry Thermal Loading

Hydraulic Expansion Joint Contact State of Heat Exchanger Based on New Contact Area Measurement Method

Discussion on the Hydraulic Expansion for the Tubes in Ultrathickness Tubesheet

Numerical Simulation of Fluid-Elastic Instability in Heat Exchanger Tube Bundles

Determination of Expanding Pressure of Hydraulically Expanded Tube-to-Tubesheet Joint

Effect of Tube Arrangement on the Welding of the Tube-to-Tubesheet Joint of Shell-and-Tube Heat Exchangers Using the Finite Element Method

Expansion Order Effect on Residual Contact Pressure of Tube to Tubesheet Joint by Hydraulic Expansion

Microstructural and Performance Analysis of TP304H/T22 Dissimilar Steel Welded Joints

Investigation of Heat Transfer Performance of Double-Walled Pipes of Heat Exchanger for Power Plant Applications

Experimental Study on Peeling Performance of T-type Brazing Joints

Analytical prediction of stress and strain in adhesive tube-to-tube joints under thermal expansion/contraction

Effect Analysis of Temperature Gradient on Metal Bellow Mechanical Performance

Numerical and Experimental Study on Expansion Forming of Inner Grooved Tube