Abstract:The efficient and economic conversion of CO2 and renewable H2 into methanol has received intensive attention due to growing concern for anthropogenic CO2 emissions, particularly from fossil fuel combustion. Herein, we have developed a novel method for preparing Ni/In2O3 nanocatalysts by using porous MIL-68(In) and nickel(II) acetylacetonate (Ni(acac)2) as the dual precursors of In2O3 and Ni components, respectively. Combined with in-depth characterization analysis, it was revealed that the utilization of MIL-68(In) as precursors favored the good distribution of Ni nanoparticles (∼6.2 nm) on the porous In2O3 support and inhibited the metal sintering at high temperatures. The varied catalyst fabrication parameters were explored, indicating that the designed Ni/In2O3 catalyst (Ni content of 5 wt %) exhibited better catalytic performance than the compared catalyst prepared using In(OH)3 as a precursor of In2O3. The obtained Ni/In2O3 catalyst also showed excellent durability in long-term tests (120 h). However, a high Ni loading (31 wt %) would result in the formation of the Ni-In alloy phase during the CO2 hydrogenation which favored CO formation with selectivity as high as 69%. This phenomenon is more obvious if Ni and In2O3 had a strong interaction, depending on the catalyst fabrication methods. In addition, with the aid of in situ diffuse reflectance infrared Fourier transform spectroscopy and density functional theory (DFT) calculations, the Ni/In2O3 catalyst predominantly follows the formate pathway in the CO2 hydrogenation to methanol, with HCOO* and *H3CO as the major intermediates, while the small size of Ni particles is beneficial to the formation of formate species based on DFT calculation. This study suggests that the Ni/In2O3 nanocatalyst fabricated using metal-organic frameworks as precursors can effectively promote CO2 thermal hydrogenation to methanol.

Catalytic Performance of Ni Catalysts Supported on Α-, Β-, and Γ-Ga2o3 Polymorphs for CO2 Hydrogenation to Methanol

Highly Active and Stable Mixed-Phase In2O3-supported Ni Catalyst for CO2 Hydrogenation to Methanol

Balance effect between Ni dispersion and hydrophobicity in CO 2 methanation over Ni/ZSM-5

Monolithic Ni5Ga3/SiO2/Al2O3/Al-fiber Catalyst for CO2 Hydrogenation to Methanol at Ambient Pressure

The metal-support synergistic effects for CO 2 hydrogenation to methanol over supported NiGa catalyst: Understanding the role of different active sites

Nickel-modified in 2 O 3 with Inherent Oxygen Vacancies for CO 2 Hydrogenation to Methanol

CO2 Methanation over Nickel-Based Catalysts Supported on MCM-41 with in Situ Doping of Zirconium

Insight and comprehensive study of Ni-based catalysts supported on various metal oxides for CO2 methanation

Nickel-modified In2O3 with inherent oxygen vacancies for CO2 hydrogenation to methanol

An Efficient Ni-Mg/HNTs Catalyst for CO2 Methanation Prepared by Sol-Gel Method Assisted with Citric Acid

Development of Highly Stable Ni-Al 2 O 3 Catalysts for CO Methanation

Selective Catalytic Methanation of CO in Hydrogen-Rich Gases over Ni/ZrO2 Catalyst

Synergistic effect of Ni and NiO in hydrogen reduction for CO methanation

Nanostructure of nickel-promoted indium oxide catalysts drives selectivity in CO2 hydrogenation

Nitrogen-Doped Ni/TiO 2 Catalyst with Enhanced Activity and Improved Selectivity for CO 2 Methanation

Hydrogenation of CO to methane over mesoporous nickel-iron-alumina xerogel nano-catalysts

Enhanced Low-Temperature Catalytic Activity for CO2 Methanation over NiMgx/Na-HNTs: the Role of MgO

Alkaline-assisted Ni nanocatalysts with largely enhanced low-temperature activity toward CO2 methanation

Construction of Ni/In2O3 Integrated Nanocatalysts Based on MIL-68(In) Precursors for Efficient CO2 Hydrogenation to Methanol

Impacts of Nickel Loading on Properties, Catalytic Behaviors of Ni/γ–Al2O3 Catalysts and the Reaction Intermediates Formed in Methanation of CO2

Effects of Composite Oxide Supports on Catalytic Performance of Ni-based Catalysts for CO Methanation