Abstract:Methanol synthesis is one of the most important industrially-viable approaches for carbon dioxide (CO 2 ) utilization, as the produced methanol can be used as a platform chemical for manufacturing green fuels and chemicals. The In 2 O 3 catalysts are ideal for sustainable methanol synthesis and have received considerable attention. Herein, Co-, Ni- and Cu-modified In 2 O 3 catalysts were fabricated with high dispersion and high stability to improve the hydrogenation performance. The Ni-promoted In 2 O 3 catalyst in the form of high dispersion possessed the largest amount of oxygen vacancies and the strongest ability for H 2 activation, leading to the highest CO 2 conversion and space time yield of methanol of 0.390 g MeOH g cat −1 h −1 with CH 3 OH selectivity of 68.7%. In addition, the catalyst exhibits very stable performance over 120 h on stream, which suggests the promising prospect for industrial applications. Further experimental and theoretical studies demonstrate that surface Ni doping promotes the formation of oxygen defects on the In 2 O 3 catalyst, although it also results in lower methanol selectivity. Surprisingly, subsurface Ni dopants are found to be more beneficial for methanol formation than surface Ni dopants, so the Ni promoted In 2 O 3 catalyst with a lower surface Ni content at the similar Ni loading can reach higher methanol selectivity and productivity. This work thus provides theoretical guidance for significantly improving the CO 2 reactivity of In 2 O 3 -based catalysts while maintaining high methanol selectivity.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to improve the efficiency and selectivity of carbon dioxide (CO\(_2\)) hydrogenation to synthesize methanol (CH\(_3\)OH). Specifically, the researchers incorporated non - precious metals (such as cobalt Co, nickel Ni and copper Cu) into indium oxide (In\(_2\)O\(_3\)) catalysts to improve the dispersibility and stability of the catalysts, thereby enhancing the hydrogen (H\(_2\)) activation performance and CO\(_2\) conversion rate, and ultimately increasing the selectivity and space - time yield (STY) of methanol. The paper specifically focused on the nickel - modified In\(_2\)O\(_3\) catalyst and found that it had the highest CO\(_2\) conversion rate and methanol space - time yield, but the methanol selectivity was low. Further research has shown that by adjusting the nickel content on the surface of the Ni/In\(_2\)O\(_3\) catalyst, the selectivity and yield of methanol can be significantly improved. In particular, the subsurface - doped nickel sites are more conducive to the formation of methanol than the surface - doped nickel sites. The main contributions of the paper are as follows: 1. **Improving CO\(_2\) conversion rate and methanol yield**: By introducing non - precious metals such as nickel, the CO\(_2\) conversion rate and methanol yield of the In\(_2\)O\(_3\) catalyst have been significantly improved. 2. **Optimizing methanol selectivity**: By adjusting the distribution of nickel in the catalyst, especially the doping of subsurface nickel, the selectivity of methanol has been improved. 3. **Stability and potential for industrial application**: The research shows that the modified catalyst exhibits good stability during long - term operation and has the potential for industrial application. These results provide theoretical guidance for the design and synthesis of more efficient In\(_2\)O\(_3\)-based catalysts and are helpful for promoting the development of CO\(_2\) hydrogenation to synthesize methanol technology.

Nickel-modified In2O3 with inherent oxygen vacancies for CO2 hydrogenation to methanol

Nickel-modified in 2 O 3 with Inherent Oxygen Vacancies for CO 2 Hydrogenation to Methanol

Co- and Ni-promoted indium oxide for CO2 hydrogenation to methanol

Highly Active and Stable Mixed-Phase In2O3-supported Ni Catalyst for CO2 Hydrogenation to Methanol

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

The Promoting Role of Ni on In2O3 for CO2 Hydrogenation to Methanol

Ni-In Synergy in CO2 Hydrogenation to Methanol

InNi3C0.5/Fe3O4 catalyst for the CO2 hydrogenation to methanol: Co-precipitation preparation, performance and mechanistic insight

Enhanced Surface Charge Localization Over Nitrogen-Doped In 2 O 3 for CO 2 Hydrogenation to Methanol with Improved Stability

Nanostructure of nickel-promoted indium oxide catalysts drives selectivity in CO2 hydrogenation

Construction of Ni/In2O3 Integrated Nanocatalysts Based on MIL-68(In) Precursors for Efficient CO2 Hydrogenation to Methanol

Ni and ZrO2 Promotion of In2O3 for CO2 Hydrogenation to Methanol

Synergistic effect of the metal-support interaction and interfacial oxygen vacancy for CO2 hydrogenation to methanol over Ni/In2O3 catalyst: A theoretical study

Selective Methanol Synthesis from CO2 Hydrogenation over an In2O3/Co/C-N Catalyst

Indium‐based Catalysts for CO2 Hydrogenation to Methanol: Key Aspects for Catalytic Performance

Rationally Designed Indium Oxide Catalysts for CO2 Hydrogenation to Methanol with High Activity and Selectivity

Recent Advances of Indium Oxide-Based Catalysts for CO2 Hydrogenation to Methanol: Experimental and Theoretical

Carbon coated In2O3 hollow tubes embedded with ultra-low content ZnO quantum dots as catalysts for CO2 hydrogenation to methanol

Performance Exploration of Ni-Doped MoS2 in CO2 Hydrogenation to Methanol

CO2 Hydrogenation Selectivity Shift over In-Co Binary Oxides Catalysts: Catalytic Mechanism and Structure-Property Relationship

Boosting oxygen vacancies by modulating the morphology of Au decorated In2O3 with enhanced CO2 hydrogenation activity to CH3OH