Abstract:The efficient and economic conversion of CO2 and renewable H2 into methanol has received intensive attention due to growing concern for anthropogenic CO2 emissions, particularly from fossil fuel combustion. Herein, we have developed a novel method for preparing Ni/In2O3 nanocatalysts by using porous MIL-68(In) and nickel(II) acetylacetonate (Ni(acac)2) as the dual precursors of In2O3 and Ni components, respectively. Combined with in-depth characterization analysis, it was revealed that the utilization of MIL-68(In) as precursors favored the good distribution of Ni nanoparticles (∼6.2 nm) on the porous In2O3 support and inhibited the metal sintering at high temperatures. The varied catalyst fabrication parameters were explored, indicating that the designed Ni/In2O3 catalyst (Ni content of 5 wt %) exhibited better catalytic performance than the compared catalyst prepared using In(OH)3 as a precursor of In2O3. The obtained Ni/In2O3 catalyst also showed excellent durability in long-term tests (120 h). However, a high Ni loading (31 wt %) would result in the formation of the Ni-In alloy phase during the CO2 hydrogenation which favored CO formation with selectivity as high as 69%. This phenomenon is more obvious if Ni and In2O3 had a strong interaction, depending on the catalyst fabrication methods. In addition, with the aid of in situ diffuse reflectance infrared Fourier transform spectroscopy and density functional theory (DFT) calculations, the Ni/In2O3 catalyst predominantly follows the formate pathway in the CO2 hydrogenation to methanol, with HCOO* and *H3CO as the major intermediates, while the small size of Ni particles is beneficial to the formation of formate species based on DFT calculation. This study suggests that the Ni/In2O3 nanocatalyst fabricated using metal-organic frameworks as precursors can effectively promote CO2 thermal hydrogenation to methanol.

Highly Active and Stable Mixed-Phase In2O3-supported Ni Catalyst for CO2 Hydrogenation to Methanol

Nickel-modified In2O3 with inherent oxygen vacancies for CO2 hydrogenation to methanol

Co- and Ni-promoted indium oxide for CO2 hydrogenation to methanol

Nickel-modified in 2 O 3 with Inherent Oxygen Vacancies for CO 2 Hydrogenation to Methanol

Ni-In Synergy in CO2 Hydrogenation to Methanol

InNi3C0.5/Fe3O4 catalyst for the CO2 hydrogenation to methanol: Co-precipitation preparation, performance and mechanistic insight

The Promoting Role of Ni on In2O3 for CO2 Hydrogenation to Methanol

Nanostructure of nickel-promoted indium oxide catalysts drives selectivity in CO2 hydrogenation

Construction of Ni/In2O3 Integrated Nanocatalysts Based on MIL-68(In) Precursors for Efficient CO2 Hydrogenation to Methanol

Synergistic effect of the metal-support interaction and interfacial oxygen vacancy for CO2 hydrogenation to methanol over Ni/In2O3 catalyst: A theoretical study

Photothermal CO2 Hydrogenation to Methanol over Ni-In2O3/g-C3N4 Heterojunction Catalysts

Indium‐based Catalysts for CO2 Hydrogenation to Methanol: Key Aspects for Catalytic Performance

Enhanced Surface Charge Localization Over Nitrogen-Doped In 2 O 3 for CO 2 Hydrogenation to Methanol with Improved Stability

Ni<sub>12</sub>P<sub>5</sub> Confined in Mesoporous SiO<sub>2</sub> with Near-Unity CO Selectivity and Enhanced Catalytic Activity for CO<sub>2</sub> Hydrogenation

Rationally Designed Indium Oxide Catalysts for CO2 Hydrogenation to Methanol with High Activity and Selectivity

Nanostructure of Indium-driven Nickel Catalysts Break CO2 Hydrogenation Preference

Aqueous Miscible Organic LDH Derived Ni-Based Catalysts for Efficient CO2 Methanation

Balance effect between Ni dispersion and hydrophobicity in CO 2 methanation over Ni/ZSM-5

Conversion of CO2 Hydrogenation to Methanol over K/Ni Promoted MoS2/MgO Catalyst

Carbon coated In2O3 hollow tubes embedded with ultra-low content ZnO quantum dots as catalysts for CO2 hydrogenation to methanol

Simultaneously Quantitative and Qualitative Regulation of Active Sites of Ni-Phyllosilicate for Enhanced Co2 Hydrogenation to Methane