Abstract:In this paper, a broadband continuous class‐B/J power amplifier based on a novel output matching network (OMN) is proposed, which is composed of a multiband harmonic control network (MHCN) and a fundamental matching network (FMN) utilizing a simplified real frequency technique (SRFT). This paper presents a broadband continuous class‐B/J power amplifier (PA) based on a novel output matching network (OMN). In order to realize a compact and broadband OMN design, a multiband harmonic control network (MHCN) with a simple structure consisting of a combination of open‐circuited stubs and a microstrip radial stub (MRS) is designed, which is capable of tuning the second harmonic impedance at the upper and lower sideband frequencies and at the center frequency well and consumes low power. Also, a fundamental matching network (FMN) is designed by means of the simplified real frequency technique (SRFT) algorithm of the computer‐aided program, which improves the efficiency of the circuit design. Both of them satisfy the requirements of a wideband PA and enhance the frequency‐selective performance of the OMN. For validation purposes, practical measurements of the designed and fabricated continuous class‐B/J PA with size of 61 × 51 mm2 have been carried out. The results show that at an operating frequency of 2.4–4.4 GHz, the 53%–73% drain efficiency (DE) at the output power of 38.4–42.4 dBm, and the maximum gain is 13.3 dB.

A Broadband PA with Complementary Matching to Get High Impedance Transformation Ratio of 125 with 60% Bandwidth on Two-Layer HBT Process

Design and Analysis of a 26–34.5-Ghz Power Amplifier with Balanced Mismatch Reduction and Interstage Matching

A W-band current combined power amplifier with 14.8dBm Psat and 9.4% maximum PAE in 65nm CMOS

A Broadband High-Efficiency Quasi Class E Internally-matched GaN Power Amplifier with a Compact Band-Pass Output Matching Structure

A 100–117 GHz W-Band CMOS Power Amplifier With On-Chip Adaptive Biasing

A 22.8 GHz to 32.8 GHz Compact Power Amplifier with a 15 Dbm Output P1dB and 36.5% Peak PAE in 65-Nm CMOS.

Design of a broadband power amplifier based on high‐efficiency impedance space

Broadband High-Efficiency Power Amplifier with Quasi-Elliptic Low-Pass Response.

A Broadband Power Amplifier Covering 14-36 GHz in 65-nm CMOS Technology

A Broadband Design For High-Efficiency Power Amplifiers

A Compact 144% Fractional Bandwidth CMOS Power Amplifier With an Optimization of Synthesized High-Order Matching Network.

A 7W, 2.5-5GHz Wideband GaN PA with Transformer-Based Matching Network.

A 2.5 Watt 2.6 GHz HBT Power Amplifier Using Transformer-Based Matching Networks

Broadband high-efficiency power amplifiers design based on hybrid continuous modes utilizing the optimal impedances at package plane

A broadband continuous class‐B/J power amplifier with novel output matching network

Transformer Based Broadband Matching

32.4 A 67.8-to-108.2ghz Power Amplifier with a Three-Coupled-Line-Based Complementary-Gain-Boosting Technique Achieving 442ghz GBW and 23.1% Peak PAE

A broadband, high isolation millimeter-wave CMOS power amplifier using a transformer and transmission line matching topology

Highly Efficient Broadband Continuous Inverse Class-F Power Amplifier Design Using Modified Elliptic Low-Pass Filtering Matching Network

A Full Ka-Band Power Amplifier with 32.9% PAE and 15.3-Dbm Power in 65-Nm CMOS

An ultra-wideband power amplifier designed through a bandwidth expansion strategy