Abstract:This article presents the design and theoretical analysis of a broadband power amplifier (PA) using the transformer-based lossy magnetically coupled resonator (MCR) network. The frequency-independent transformer loss coefficient alpha and its detailed extraction procedure are obtained by analyzing the double- pi model of the inductor. Theoretical derivation shows that for lossy transformers, broadband matching without gain ripple can only be achieved by using asymmetrical MCRs. Based on this, four new mismatch parameters m , n , omega(0) , and Q(0) of asymmetrical MCRs are introduced to facilitate the analysis. A straightforward design flow based on the asymmetrical lossy MCRs to realize broadband matching including output matching and input/interstage matching is provided, which can effectively guide the implementation of broadband PAs. To demonstrate the proposed design methodology, a Ka -band broadband PA is implemented in a 65-nm CMOS process. The measurement results show that the proposed PA achieves 30.9% peak power added efficiency ( PAE(max)), 17.9-dBm saturated output power ( P-sat), and 16.4-dBm output 1-dB compression point ( OP1 dB). The measured 3-dB gain bandwidth ranges from 20 to 42 GHz, corresponding to a fractional bandwidth (FBW) of 71%, covering the entire Ka -band. The PA demonstrates a flat gain with an in-band gain ripple of only 0.25 dB. To the best of the authors' knowledge, this is the first article that thoroughly analyzes the lossy MCR matching theory.

A Full Ka-Band Power Amplifier with 32.9% PAE and 15.3-Dbm Power in 65-Nm CMOS

Fully integrated pseudo differential K-band power amplifier in 0.13um standard CMOS

A 22.8 GHz to 32.8 GHz Compact Power Amplifier with a 15 Dbm Output P1dB and 36.5% Peak PAE in 65-Nm CMOS.

A W-band current combined power amplifier with 14.8dBm Psat and 9.4% maximum PAE in 65nm CMOS

Design and Analysis of a 26–34.5-Ghz Power Amplifier with Balanced Mismatch Reduction and Interstage Matching

A 68.5~90 GHz High-Gain Power Amplifier with Capacitive Stability Enhancement Technique in 0.13 Μm SiGe BiCMOS

A 100–117 GHz W-Band CMOS Power Amplifier With On-Chip Adaptive Biasing

A 32.9% PAE, 15.3 Dbm, 21.6–41.6 GHz Power Amplifier in 65nm CMOS Using Coupled Resonators

A 4 W K-Band Gaas Mmic Power Amplifier With 22 Db Gain

A 30Mhz-3Ghz 1W Stacked-Fet GaAs MMIC Power Amplifier.

Design of X/Ku Dual-Wideband GaN Power Amplifier MMIC Based on Coupled Multiresonator Matching Networks

A 38-48 GHz Power Amplifier with 23-dB Gain 18.5-dBm Psat and 28% PAE in 65-nm CMOS

A Wideband Power Amplifier in 65 nm CMOS Covering 25.8 GHz–36.9 GHz by Staggering Tuned MCRs

A Compact 19.7-to 43.8-Ghz Power Amplifier with 20.3-Dbm $p_{\mathrm{sat}}$ and 35.5% PAE in 28-Nm Bulk CMOS

A Compact W-Band Power Amplifier with a Peak PAE of 21.1% in 65-Nm CMOS Technology

A $Ka$-Band Broadband Power Amplifier with Transformer-Based Lossy Magnetically Coupled Resonator Network: Analysis and Design

A Two-Way Current-Combining W-band Power Amplifier Achieving 17.4-Dbm Output Power with 19.4% PAE in 65-Nm Bulk CMOS

A 68–79 GHZ 15.6DBM Power Amplifier in 65NM CMOS

A 57-64 GHz Two-Way Parallel-Combined Power Amplifier with 16.6 dBm Psat and 23.6% Peak PAE in 40nm Bulk CMOS

A Compact 140-GHz Power Amplifier With 15.4-dBm $P_{\mathrm{sat}}$ and 14.25% Peaking PAE in 28-nm Bulk CMOS Process

A Two-Way Power-Combining 60ghz CMOS Power Amplifier with 22.0% PAE and 19.4dbm Psat in 65nm Bulk CMOS