Abstract:Ti2AlNb-based alloys are developed from conventional titanium aluminides (TiAl-based alloys and Ti3Al-based alloys). Comparing with TiAl and Ti3Al-based alloys, Ti2AlNb-based alloys have better mechanical properties of strength density ratio, high temperature fracture toughness and creep resistance. It is expected to replace traditional high temperature materials such as nickel-based alloys for the manufacture of aero-engine components. Laser shock peening (LSP) is an advanced surface modification technology which induces high amplitude, large depth residual compressive stress on the surface of materials. It can effectively enhance mechanical properties of material such as micro-hardness, fatigue resistance, high temperature oxidation performance. Compared to other surface modification technologies such as shot peening and rolling, LSP can not only induce deeper compress residual stress (1-2 mm), which is about five to ten times dwms than that of shot peening, but it can refine the grain or even form nanocrystals which plays a significant role in enhancing properties of material. For these reasons, this surface treatment technology has been widely used in the aircraft and nuclear energy industries. In this paper, the surface modification of Ti2AlNb alloy was carried out by laser shock peening, and the microstructure evolution, residual stress and the performance at high temperature were investigated. The results show that laser shock peening can significantly reduce the grain size of the surface of Ti2AlNb alloy. Dislocation lines, dislocation tangles and dislocation walls were generated after LSP. The micro-hardness is increased from 350 ITV to 395 HV and the effect layer is about 1.2 mm. The residual compressive stress of -337 MPa is generated on the surface of the sample. In addition, residual stress is released obviously at high temperature. The residual stress on the surface of sample reduces to -65 MPa after heat treatment at 720 degrees C for 4 h. The residual stress is almost completely released after heat treatment at 720 degrees C for 10 h. However, the release rate of residual stress is slowed down at 600 degrees C. The effect of laser shock peening is still presence after heat treatment for 100 h.

The Effect of Laser Shock Peening with Different Power Density on the Microstructure Evolution and Mechanical Properties of MAR-M247 Nickel-Base Alloy

Effects of Residual Stress Induced by Laser Shock Peening on Mixed-Mode Crack Propagation Behavior in 7075-T6 Aluminum Alloy Panel

On the Microstructure, Residual Stress and Fatigue Performance of Laser Metal Deposited TC17 Alloy Subjected to Laser Shock Peening

Microstructural Evolution and Mechanical Properties of Duplex-Phase Ti6242 Alloy Treated by Laser Shock Peening

The Effects of Laser Shock Peening on Microstructure and Properties of Metals and Alloys: A Review

Effect of Ultrasonic Shot Peening and Laser Shock Peening on the Microstructure and Microhardness of IN738LC Alloys

Microstructural Evolution, Mechanical Behaviors and Strengthening Mechanism of 300 M Steel Subjected to Multi-Pass Laser Shock Peening

Microstructure and mechanical properties of laser shock peened 38CrSi steel

Laser Shock Peening of Ti6Al4V Alloy with Combined Nanosecond and Femtosecond Laser Pulses

Effects of Multiple Laser Shock Peening Impacts on Microstructure and Wear Performance of Wire-Based Laser Directed Energy Deposition 17-4PH Stainless Steel

The Effects of Laser Shock Peening on Fatigue Life in Ni-Based Superalloy

Effect of laser shock peening on tribological properties of magnesium alloy ZK60

Impact on Mechanical Properties and Microstructural Response of Nickel-Based Superalloy GH4169 Subjected to Warm Laser Shock Peening

Microstructural evolution and mechanical behaviors of Al-Cu-Li alloy processed by laser shock peening

Microstructure and mechanical properties of an austenite NiTi shape memory alloy treated with laser induced shock

Laser Shock Peening Rounds Influencing Microstructural and Mechanical Properties of 300M Steel

Aluminizing Mechanism on a Nickel-Based Alloy with Surface Nanostructure Produced by Laser Shock Peening and Its Effect on Fatigue Strength

Effect of Laser Shock Peening on Microstructure and Residual Stress of Ti2AlNb Alloy

The Effect of Laser Shock Peening with and Without Protective Coating on Mechanical Properties of Surface of AZ31B

Microstructure Evolution and Improved Surface Properties of Ti-6Al-3Nb-2Zr-1Mo Alloy by Laser Shot Peening

The effect of laser shock processing on the microstructures and properties of 2060 Al Li alloys