ON THE MICROGEL OF CIS-POLYISOPRENE AND MARK-HOUWINK EQUATION

Wanjun Zhang,Meina Ruan,Rongshi Cheng

DOI: https://doi.org/10.3724/j.issn.1000-0518.1986.1.14

1986-01-01

Abstract:The microgel in the fractions of cis-poly-isoprene polymerized by lanthanide catalyst was determined with the aid of Guinier plots of the light scattering data, and the mono-disperse Mark-Houwink equation of the linear polyisoprene in the sol of the polymer was deduced.

What problem does this paper attempt to address?

ETHYLENE POLYMERIZATION WITH CORE-SHELL ZIEGLER-NATTA HYBRID CATALYSTS

Fan Lina,Du Lijun,Huang Haibo,Zhang Letian,Jiang Binbo,Wang Jingdai,Yang Yongrong

DOI: https://doi.org/10.3724/sp.j.1105.2010.09293

2010-01-01

Acta Polymerica Sinica

Abstract:Poly (styrene-co-acrylic acid) (PSA )/MgCl2 complex was coated on TiCl3 catalyst (SLC-S catalyst) supported on SiO2 using sol-gel method,and the Ziegler-Natta hybrid catalysts were prepared.The resulting catalysts were characterized by a series of techniques,namely Fourier transform infrared spectroscopy (FTIR),laser scattering particle analyzer and scanning electronic microscopy (SEM).It was found that the hybrid catalysts had a core-shell structure and the thicknesses of membrane of HC-5 (PSA/SLC-S = 5 wt% ) catalyst and HC-20 (PSA/SLC-S = 20 wt% ) catalyst were 1.5 and 3 μm,respectively.Three different kinds of catalysts were used for gas phase ethylene polymerization.The effects of thickness of the membrane in hybrid catalysts on the activity and the profile of the polymerization kinetic curves of the catalysts were investigated.The results indicated that the HC-20 catalyst had a good ethylene polymerization activity and its kinetic curve was stable with an inductive period,while HC-5 catalyst demonstrated a fast decay during polymerization and its activity and kinetic curve both resembled the traditional TiCl3 catalyst.Besides,the properties of the polyethylene made by hybrid catalysts under different hydrogen contents were obtained.It is obvious that the thickness of membranes could affect the hydrogen response of the hybrid catalysts and the molecular weight distribution of the resultant polyethylene.
Ethylene polymerization with metallocene/late transition metal combined catalysts

Xing-bing HUANG,Jing-dai WANG,Bin-bo JIANG,Yong-rong YANG,Shu-bin HUANG

DOI: https://doi.org/10.3785/j.issn.1008-973X.2007.08.024

2007-01-01

Abstract:Ethylene was polymerized using bis(cyclopentadienyl) titanium dichloride (Cp2TiCl2) and crnick-el-diimine (ArN = C(CH3)-C(CH3) = NAr, Ar = 2, 6-(iPr)2C6H3) (DMN) binary catalysts, activated with methylaluminoxane (MAO). The effects of polymerization temperature and Cp2TiCl2 molar fraction on binary catalysts performances were investigated. The activity of binary catalysts increased linearly with Cp2TiCl2 molar fraction at 0°C. The binary catalysts system showed a good synergic effect at 50°C. The polymerization activity increased with Cp2TiCl2 molar fraction with a maximum at 0.67 of Cp2TiCl2 molar fraction. The gel permeation chromatography (GPC) analysis showed that both Cp2TiCl2 and nickel-dii-mine have only one type of active site, while the binary catalysts have two types, which are almost the same as that of Cp2TiCl2 and nickel-diimine respectively. Analysis of polyethylene microblends using differential scanning calorimeter (DSC) and scanning electron microscopy (SEM) indicate that phase separation occurres in the obtained polyethylene at 50°C, while the linear and branched polyethylene obtained at 0°C are uniformly microblends.
Liquid Containing Particle Polymerization: Ethylene/-Olefin Reaction in a New Environment

Xiao-bo Hu,Jing-yuan Sun,Bin-bo Jiang,Jing-dai Wang,Yong-rong Yang

DOI: https://doi.org/10.11777/j.issn1000-3304.2021.21046

2021-01-01

Acta Polymerica Sinica

Abstract:With the change of the condensing agent (n-hexane) content in the process of ethylene/1-hexene copolymerization, three polymerization environments of pure gas phase environment, poor n-hexane environment and rich n-hexane environment were established. The "comonomer effect" and the "cosolubility effect" collectively affect the copolymerization reaction. The results show that the polymerization activity decreases in the pure gas phase environment, due to the capillary condensation inside the dry particles, and the comonomer effect dominates. In the poor n-hexane environment, because of the high molar concentration ratio of 1-hexene/ethylene in the wet particles at the initial stage, the polymerization activity remains basically unchanged under the competition of the comonomer effect and the cosolubility effect. With the increase of n-hexane content, co-solubility effect dominates, and the polymerization activity rises. The liquid-containing particle polymerization mode that the molar concentration ratio of 1-hexene/ethylene in the gas phase and slurry environment is the best maximizes the polymerization activity. In the rich n-hexane environment, the polymerization activity decreased slightly due to the dilution of 1-hexene concentration by n-hexane. The short chain branch degree of polyethylene products is almost the same in the pure gas phase environment and the poor n-hexane environment, slightly higher than that in the rich n-hexane environment.
Theoretical Study on the High Polymer Molecular Weight of Heteroatom-Substituted Constrained Geometry Catalyst

Xinyue Du,Congjing Ren,Xiaodong Hong,Jingdai Wang,Yongrong Yang,Zuwei Liao

DOI: https://doi.org/10.3390/polym16233251

IF: 5

2024-01-01

Polymers

Abstract:This theoretical study investigates the high molecular weight (Mw) production in copolymerization of ethylene and 1-octene using heteroatom-substituted constrained geometry catalysts (CGCs). The research explores the correlation between chain termination reactions and polymer molecular weight, revealing that the Gibbs free energy barrier of the chain termination reactions is positively linked to the molecular weight. Quantitative structure–property relationship models were constructed, indicating that molecular descriptors such as atom charge, orbital energy, and buried volume significantly influence the polymer molecular weight.
Characterization of Cis‐1,4‐polyisoprene Polymerized with Lanthanide Catalyst System (Ln‐pir)

BG QIAN,FS YU,RS CHENG,MZW RUAN,ST LI,YS ZHANG,YH YANG

DOI: https://doi.org/10.1002/app.1985.070300133

IF: 3

1985-01-01

Journal of Applied Polymer Science

Abstract:AbstractThe PIR raw rubber samples, Ln–PIR and Ti–PIR, were subjected to molecular characterization, which shows that Ln–PIR contains microgel particles, but the least branching in its macromolecular chains; its cis‐1,4 content is about 96% and molecular weight distribution is rather broad. The value of α in the Mark‐Houwink viscosity equation for molecular weight Mη is determined as 0.70. The abnormal stress–relaxation behavior can be normalized by the introduction of an entanglement reduction factor, e.g., Mη/Mc for maximum relaxation time. This reduction is subsequently verified by evaluating the molecular weight dependence on bulk viscosity with 3.45th power. The starting of a yield process is equivalent to that of a disentanglement process, since both processes have approximately the same activation energy, 8 kJ/mol. For the onset of yield or of entanglement, the critical molecular weight Mc as estimated independently by yield strength method or by relaxation spectrum is equal to (5.4 ± 0.2) × 104. It is confirmed by the reduced yield strength method by calculating Me from the equation Me = 3gNρRT/EeN with gN = 1.22 and then by extrapolation, where EeN is the equilibrium modulus due to entanglement.
Gel point and mechanism of gel formation in copolymers from free-radical crosslinking polymerization of vinyl/divinyl monomers

Yingwu Luo,Zhixue Weng,ZhiMing Huang,Zuren Pan

1997-01-01

Abstract:After discussing the results from the computer simulations of gel point in the vinyl/divinyl monomer free-radical crosslinking polymerization by several typical models, the authors proposed that gel point be distinguished from mechanism of gel formation, The criteria of gel point is the appearing of the macromolecule whose average crosslinking density is equal to 1/<(DP)over bar>(pw). However, the gel formation can have two processes of nucleation and growth, where the condition of nucleation is that the average crosslinking density in one macromolecule of a sol becomes 1/<(DP)over bar>(pw).
Viscoelastic Study of Single Chain Cyclized Polymeric Nanoparticles and Linear Polymers Blends

Si-rong Li,Lin-ru Guo,Yong-sheng Gao,De-zhong Zhou,Wen-xin Wang

DOI: https://doi.org/10.11777/j.issn1000-3304.2017.16304

2017-01-01

Acta Polymerica Sinica

Abstract:It is of great importance to polymerize multivinyl monomers and simultaneously circumvent uncontrollable polymerization process and low gel point. Hereby, a type of divinyl monomer: ethylene glycol dimethacrylate (EGDMA) was successfully homopolymerized by kinetically controlled Cu-0 and Cu-II-meadiated reversible-deactivation radical polymerization (RDRP). The kinetic study showed a well-controlled polymerization behaviour. During the initial stage, a linear chain propagation was observed with a low polydispersity (< 1.35) demonstrating the controlled/living polymerization feature. However, the products obtained during this stage showed a high consumption of pendent vinyl groups (around 28%) based on the analysis by proton nuclear magnetic resonance (H-1-NMR). This high pendent vinyl conversion in the linear chain propagation stage is attributed to the significant involvement of the intramolecular cyclization. The promotion of the intramolecular cyclization and suppression of the intermolecular crosslinking is achieved by the low kinetic chain length and low polymer volume concentration. Given the coexistence of linear chain propagation and high pendent vinyl conversion, the novel single chain cyclized polymer structure was formed during this process, which was further used as polymeric nanoparticles to modify the viscoelasticity of linear poly(methyl methacrylate) (PMMA) melts. The essentially similar chemical structure between the EGDMA and MMA ensures the minimization of enthalpic interactions and dispersion forces between the nanoparticles and linear melts. The oscillatory rheology study and the subsequent time temperature superposition based on the Williams-Landel-Ferry equation demonstrated the coexistence of the segmental relaxation at high frequencies and chain relaxation at low frequencies. The complex viscosity studied as a function of the shear frequency showed the decrease in terminal viscosity with addition of 10 wt% single chain cyclized polyEGDMA nanoparticles. A further decrease was also observed with the addition of 20 wt% nanoparticles, which is not in agreement with Einstein relationship between the complex viscosity and fraction of added particles. This strategy provides a simple and efficient approach to control polymerization of multivinyl monomers, and the unexpected decrease in viscosity of the blend system should in principle open a new avenue to modify polymer melts and molten systems.
Primary chain partition between sol and gel and molecular weight of sol in free radical crosslinking copolymerization

Yingwu Luo,Zhixue Weng,ZhiMing Huang,Zuren Pan

1998-01-01

Abstract:Based on the statistical/kinetic method presented previously a partition model of primary chains between sol and gel was developed. A model of average molecular weight of the sol was also proposed. From computer simulation, it is found that the chain length in the gel is much bigger than that in the sol and once passing gel point, the molecular weight decreases sharply, depending on reactivity ratio. The presented model is successfully applied to predict the development of molecular weight of sol in the vinyl chloride/diallyl phthalate suspension crosslinking copolymerization.
Microtacticity of Polypropylene Fractions Produced by Different Active Sites of Heterogeneous Ziegler-Natta Catalyst

JT Xu,YQ Yang,LX Feng,XM Kong,SL Yang

DOI: https://doi.org/10.1002/(sici)1097-4628(19961031)62:5<727::aid-app2>3.0.co;2-y

IF: 3

1996-01-01

Journal of Applied Polymer Science

Abstract:Polypropylene (PP) prepared with the MgCl2/TiCl4-AlEt(3)/Ph(2)Si(OMe)(2) catalyst system was fractionated by a preparative temperature rising elution fractionation (TREF) technique in the wide temperature range of room temperature to 130 degrees C. The results of fractionation showed that there were plural active sites in this heterogeneous catalyst. Some key fractions were selected for characterization of H-1- and C-13-NMR. H-1-NMR results suggested that the fractionation takes place according to tacticity. Based on analysis of C-13-NMR, it was concluded that the polymerization mechanism proceeding on highly stereospecific active sites was active site-controlled and nonstereospecific active sites were able to convert into syndiotactic active sites during the polymerization, which led to the formation of a syndiotactic block. (C) 1996 John Wiley & Sons, Inc.
Modeling of Effective Crosslinking Density of the Gel in Free-Radical Copolymerization of Vinyl/divinyl Monomers

YW Luo,ZX Weng,ZM Huang,ZR Pan

DOI: https://doi.org/10.1002/(sici)1097-4628(19970531)64:9<1691::aid-app4>3.0.co;2-a

IF: 3

1997-01-01

Journal of Applied Polymer Science

Abstract:The concept of effective crosslinking density proposed by Scanlan is extended to heterogeneously crosslinking polymer. A kinetic-statistical model of effective crosslinking density of the gel is developed in free-radical heterogeneously crosslinking polymerization. The model is applied to the vinyl chloride (VC)/dially phthalate (DAP) suspension process. It is concluded that the model successfully predicts the development of effective crosslinking density of the gel. It is suggested that the degree of swelling of the gel is determined by its effective crosslinking density. However, when the crosslinking density is high, the physical entanglements would greatly influence the degree of swelling. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 1691–1699, 1997
Characterization of Intramolecular Composition Heterogeneity of Metallocene-Based and Conventional Ethylene-Butene Copolymers Using Tref/Dsc

JT Xu,XR Xu,LX Feng,LS Chen,W Chen

DOI: https://doi.org/10.1002/1521-3935(20010601)202:9<1524::aid-macp1524>3.0.co;2-#

IF: 2.996

2001-01-01

Macromolecular Chemistry and Physics

Abstract:A new and convenient method for the qualitative characterization of intramolecular composition heterogeneity was established. The metallocene-based and conventional ethylene-butene copolymers were fractionated with preparative temperature rising elution fractionation (TREF) technique, and some selected fractions were directly characterized with differential scanning calorimetry (DSC) after stepwise crystallization. The observed multiple endotherms in the melting traces of some fractions were attributed to intramolecular composition heterogeneity after other possibilities were excluded. It is found that intramolecular composition heterogeneity is present in both metallocene-based and conventional ethylene-butene copolymers, but the metallocene-based copolymers may have a relatively narrower intramolecular composition distribution. Moreover, the mechanism of this method and its applicable range are also discussed.
A model of the gel fraction of polymer in the vinyl chloride/divinyl monomers suspension copolymerization

Yingwu Luo,Zhixue Weng,Zhiming Huang,Zuren Pan

DOI: https://doi.org/10.1002/(sici)1097-4628(19970531)64:9<1681::aid-app3>3.0.co;2-b

IF: 3

1997-01-01

Journal of Applied Polymer Science

Abstract:Based on our previous general model of the gel/sol partition, a model of the gel fraction of polymer is developed in the VC heterogeneously crosslinking suspension polymerization, where the kinetic factors such as two-phase polymerization mechanism, distinction of the gel and sol radicals, and the effects of the gel on kinetics are taken into account. The model is applied to the VC/diallyl phthalate (DAP) suspension copolymerization. The model parameters are obtained by fitting the experimental data with the model. The model turns out to be successful to predict the development of the gel fraction with conversion. it is inferred that the intermolecular crosslinking reaction is affected by diffusion. In addition, the crosslinks prove to be nonrandomly distributed in the VC/DAP suspension copolymerization. (C) 1997 John Wiley & Sons, Inc.
Synthesis and solution properties of single-chain microgels from poly(N-isopropylacrylamide) copolymer

Nan Zhou,Jian Ni,Xiaohu Yan,Zhiliu Wang,Rongshi Cheng

DOI: https://doi.org/10.1002/app.12398

IF: 3

2003-01-01

Journal of Applied Polymer Science

Abstract:Single-chain microgels were synthesized successfully from the cross-linkable poly(N-isopropylacrylamide) (PNIPAM) copolymer. This type of microgel has the exact chemical structure, molecular weight and molecular weight distribution of its precursor. It provides a direct way to compare the properties of linear polymers with those of their networks. The viscosity properties show that the microgels have lower critical solution temperatures (LCST) that are even higher than those of the corresponding linear copolymers. This can be attributed to the crosslinking points, which retard the change of the conformation of the network chains. (C) 2003 Wiley Periodicals, Inc.
Rheological Study of the Sol-Gel Transition of Hybrid Gels

Y Zhao,Y Cao,YL Yang,C Wu

DOI: https://doi.org/10.1021/ma020919y

IF: 5.5

2003-01-01

Macromolecules

Abstract:As the temperature decreases, thermally sensitive spherical poly(N-isopropylacrylamide) (PNIPAM) microgels with a lower critical solution temperature (LCST similar to 32 degreesC) swell in a dispersion, leading to a possible volume-concentration induced sol-gel transition if the microgel concentration is sufficiently high. In such a formed gel, polymer chains inside each microgel were chemically cross-linked, but individual microgels were physically close-packed into a three-dimensional network. Such hybrid gels can be used as model systems for studying the sol-gel transition, which avoids several problems, such as chain entanglements, phase separation, and vitrification, normally occurring in a gelling process. The sol-gel transition of such hybrid gels was studied by the change of viscoelastic modulus G' and G". As expected, the sol-gel transition depends on the polymer concentration, frequency, and shear stress. The gelation point could be roughly estimated by the method of Winter and Chambon. Our results showed that the temperature dependence of G" and tan delta (=G"/G') had a minimum, which corresponded to the sol-gel transition, providing a better way to determine the sol-gel transition temperature.
Nanoscopic Confinement Effects on Ethylene Polymerization by Intercalated Silicate with Metallocene Catalyst

Q Wang,ZY Zhou,LX Song,H Xu,L Wang

DOI: https://doi.org/10.1002/pola.10987

2003-01-01

Abstract:In this article we report a study of in situ polymerization of ethylene by intercalated montmorillonite (MMT) with metallocene, allowing an investigation of the nanoscopic confinement effect of olefin polymerization and of the structure of polymer prepared in situ. Ethylene polymerization by intercalated MMT with metallocene and the varied aggregation morphology of the resulting polymer during polymerization were studied by X-ray diffraction (XRD), differential scanning calorimetry (DSC), and gel permeation chromatography (GPC). The polymerization kinetics and the resulting polymer before and after destruction of the silicate registry were different. The laminated structure of silicate lowered the all-reaction rate, including the propagation, chain transfer, and termination reactions, producing polymer of a high molecular weight. Moreover, the melting point of the polymer gradually increased during the in situ polymerization, indicating that nanoscopic confinement between solid surfaces affects the crystallization behavior of polyethylene via in situ polymerization. (C) 2003 Wiley Periodicals, Inc.
Determination of Mark–Houwink Parameters of Ethylene–norbornene Copolymers and Molecular Characteristics Estimation

Zhen Yao,Shao-jie Liu,Fei Lv,Kun Cao

DOI: https://doi.org/10.1002/app.28498

IF: 3

2008-01-01

Journal of Applied Polymer Science

Abstract:Ethylene-norbornene copolymers (ENC) with similar to 50%, similar to 25% and similar to 15% norbornene (NB) fraction in a wide range of molecular weight were produced by metallocene catalysts. By coupling the gel permeation chromatography (GPC) with the intrinsic viscosity data in 1,2,4-trichlorobenzene (TCB)at 150 degrees C, the Mark-Houwink parameters of ENC were determined and compared with previous classical analysis using polyethylene's relative parameters. The results indicated that parameter K was considerably increased with decreasing NB fraction in ENC but parameter a was only increased slightly. Furthermore, the structure characteristics and correlative rheological parameters of resultant ENC were also calculated and discussed by the Stockmayer-Fixman analysis. (C) 2008 Wiley Periodicals, Inc.
Determination of the Monodisperse Mark-Houwink Equation of High-Vinyl Polybutadiene by Gel Chromatography and Light-Scattering

SQ BO,RS CHENG

DOI: https://doi.org/10.1080/01483918208062840

1982-01-01

Journal of Liquid Chromatography

Abstract:Gel chromatographic, light scattering, viscosimetric and osmotic pressure measurements have been made for high vinyl polybutadiene fractions and whole polymer. Three alternative methods for deducing a monodisperse Mark-Houwink equation from gel chromatographic, light scattering and viscosimetric data of samples with unequal distribution widths are suggested. The monodisperse Mark-Houwink equations obtained by these methods for high vinyl poly(butadiene) are all alike.
Branching Kinetics of Epoxy Polymerization of 1,4-Butanediol Diglycidyl Ether with Cis-1,2-Cyclohexanedicarboxylic Anhydride

C WU,B CHU,G STELL

DOI: https://doi.org/10.1021/ma00192a054

1991-01-01

Makromolekulare Chemie Macromolecular Symposia

Abstract:The copolymerization of an epoxy resin [1,4-butanediol diglycidyl ether (DGEB) (Note a)] with an anhydride [cis-1,2-cyclohexanedicarboxylic anhydride (CH)] in the presence of N,N-benzyldimethylamine (CA) as a catalyst produces a branched epoxy polymer. We show that the branching kinetics of the copolymerization reaction and the molecular weight distribution of the branched polymers can be approximated by using Smoluchowski's coagulation equation. In the simplest relevant application of this equation to our problem, the overall rate kernel w(u,v) that describes the branching probability in the equation turns out to be proportional to the sum of active sites on the two polymers with a time dependent coefficient. The molecular weight distribution (MWD) and the weight average molecular weight of the branched copolymers at different reaction stages before the gelation threshold are calculated theoretically. The calculated values are then compared with the experimental results obtained by using small angle X-ray scattering (SAXS), laser light scattering (LLS), and chemical analysis. Satisfactory agreement between experimental results and the use of the coagulation equation is attained when it is assumed that the distribution of epoxy polymer molecules is exponential in the number of branching points or, equivalently, active sites, at an early stage of the polymerization reaction.
The characteristics of lanthanide coordination catalysts and the cis-polydienes prepared therewith

Shen Zhiquan,Ouyang Jun,Wang Fusong,Hu Zhenya,Yu Fusheng,Qian Baogong

DOI: https://doi.org/10.1002/pol.1980.170181202

1980-01-01

Abstract:The stereoregularity of polydienes is almost the same in regard to the individual elements of the lanthanide series, whereas the activity of the Ln catalysts in diene polymerization varies from one to the other within the series. The latter may be attributed to the difference in the number of electrons that occupy the 4f orbitals. It has been proved that the polymerization of dienes with Ln catalysts under certain conditions proceeds by a “living polymer” mechanism. With regard to the polymerization of butadiene, the most active catalyst is a Nd3+species a new binary system of NdCl3-3ROH + AlR3 has been discovered. The cis- 1,4 content in polybutadiene is about 97% and the 1,2 content, less than 1%. For the polymerization of isoprene with a Nd3+ catalyst system, the effects of ligand and alkyl groups in AIR3 on cis-1,4 content (ca. 95%) in polyisoprene can be neglected. For the copolymerization of butadiene and isoprene, the cis-1,4 contents of these two monomeric units in the copolymer are greater than 95% the reactivity ratios r1 and r2 are determined. and the Tg's of the copolymers of various compositions deviate slightly from the calculated values for random copolymers. A linear relationship exists between the yield strength from the stress-strain curve of Ln-polvbutadiene and its [n] This relationship is verified by Ln-polyisoprene and natural rubber but different slopes are obtained
Trans-1,4- stereospecific polymerization of isoprene with MgCl2-supported Ziegler-Natta catalyst I. Initial polymerization kinetic and polymerization mechanism

Xiangyu Liu,Weitian Li,Qingtao Niu,Riguo Wang,Aihua He

DOI: https://doi.org/10.1016/j.polymer.2018.02.042

IF: 4.6

2018-03-01

Polymer

Abstract:In order to understand the trans-1,4 stereospecific polymerization mechanism of conjugated dienes with the heterogeneous Ziegler-Natta catalyst, isoprene polymerization kinetics at different polymerization temperature in the initial polymerization stage and the microstructures of polymers and its fractions were studied in this work. Both polymerization temperature and time influenced the polymerization behavior greatly. The nascent polyisoprene (30s) with unusual high cis-1,4-units was observed and then the trans-1,4/cis-1,4 ratio of the polymers increased obviously to finally trans-1,4-dominated (96 mol%) with the increase in polymerization time. Fractions of the products based on the different crystallizability at different temperature were isolated and characterized by 1H-NMR, 13C-NMR, GPC and DSC. The nascent polyisoprene under 30s polymerization time was mainly composed by fractions A and G with 30–60 mol% trans-1,4-units and 2–26 mol % trans-cis dyad linkages. Active species with low stereoregularity may contribute to theses fractions. While fractions D and E with high trans-1,4 unit (>96 mol%) from active species with high stereoregularity were growing to the predominated components with increased conversion. At least two kinds of active species with different stereospecificity and lifetime were proposed to explain the isoprene polymerization with heterogeneous TiCl4/MgCl2-Al(i-Bu)3 catalyst. Effects of temperature on cis/trans-1,4 structure were discussed. Hopely, this research would provide a further understanding about trans-1,4 stereospecific polymerization of conjugated dienes with heterogeneous Ziegler-Natta type catalysts.

polymer science

ON THE MICROGEL OF CIS-POLYISOPRENE AND MARK-HOUWINK EQUATION

ETHYLENE POLYMERIZATION WITH CORE-SHELL ZIEGLER-NATTA HYBRID CATALYSTS

Ethylene polymerization with metallocene/late transition metal combined catalysts

Liquid Containing Particle Polymerization: Ethylene/-Olefin Reaction in a New Environment

Theoretical Study on the High Polymer Molecular Weight of Heteroatom-Substituted Constrained Geometry Catalyst

Characterization of Cis‐1,4‐polyisoprene Polymerized with Lanthanide Catalyst System (Ln‐pir)

Gel point and mechanism of gel formation in copolymers from free-radical crosslinking polymerization of vinyl/divinyl monomers

Viscoelastic Study of Single Chain Cyclized Polymeric Nanoparticles and Linear Polymers Blends

Primary chain partition between sol and gel and molecular weight of sol in free radical crosslinking copolymerization

Microtacticity of Polypropylene Fractions Produced by Different Active Sites of Heterogeneous Ziegler-Natta Catalyst

Modeling of Effective Crosslinking Density of the Gel in Free-Radical Copolymerization of Vinyl/divinyl Monomers

Characterization of Intramolecular Composition Heterogeneity of Metallocene-Based and Conventional Ethylene-Butene Copolymers Using Tref/Dsc

A model of the gel fraction of polymer in the vinyl chloride/divinyl monomers suspension copolymerization

Synthesis and solution properties of single-chain microgels from poly(N-isopropylacrylamide) copolymer

Rheological Study of the Sol-Gel Transition of Hybrid Gels

Nanoscopic Confinement Effects on Ethylene Polymerization by Intercalated Silicate with Metallocene Catalyst

Determination of Mark–Houwink Parameters of Ethylene–norbornene Copolymers and Molecular Characteristics Estimation

Determination of the Monodisperse Mark-Houwink Equation of High-Vinyl Polybutadiene by Gel Chromatography and Light-Scattering

Branching Kinetics of Epoxy Polymerization of 1,4-Butanediol Diglycidyl Ether with Cis-1,2-Cyclohexanedicarboxylic Anhydride

The characteristics of lanthanide coordination catalysts and the cis-polydienes prepared therewith

Trans-1,4- stereospecific polymerization of isoprene with MgCl2-supported Ziegler-Natta catalyst I. Initial polymerization kinetic and polymerization mechanism