Abstract:To predict brittle fracture in high-strength steels, this study introduces a methodology for analyzing hydrogen-assisted degradation. The proposed approach considers the fully coupled problems of deformation-hydrogen diffusion and cohesive zone modeling. The analysis of hydrogen diffusion assumes that trapped and lattice hydrogen remain in a equilibrium state while accounting for the relationships between the increase in trap sites and plastic strain. The diffusion model simulates hydrogen diffusion in the small scale yielding (SSY) configuration at a crack tip. The simulation results reveal that hydrogen diffusion follows the hydrostatic stress distribution around the crack tip region. Additionally, the plastic strain near this area leads to an increased number of trap sites. Notably, the simulations indicate that lattice hydrogen is the dominant source of embrittlement when a sufficient amount of hydrogen atoms dissolve into the steel, as compared to trapped hydrogen. The hydrogen-assisted degradation evolution is studied by investigating the influence of hydrogen in a cohesive zone modeling (CZM) with a trapezoidal traction separation law (TSL), based on Hydrogen-Enhanced DEcohesion (HEDE) framework. The fully computational framework is utilized to simulate the hydrogen-charged fracture toughness test in a (CT) specimen made of 30CrMo high strength steel. It is demonstrated that the load bearing capacity of the specimen decreases with an increase in the initial hydrogen concentration. Furthermore, the study examines the evolution of the initial crack time with varying initial hydrogen concentrations. The initial hydrogen concentrations are estimated to match the maximum loads observed in the experimental load-displacement curves based on computational framework. The computational CTOD-R curves for hydrogen generally follow the experimental data, the marginally elevated computational CTOD values to underestimate the embrittling in hydrogen-contaminated steel. Overall, the present study proves the capability of this numerical technique to reproduce experimental findings related to hydrogen-assisted fracture.

Numerical Simulation of Hydrogen Diffusion in Rubber O-rings Containing a Cavity Defect Based on Thermomechanical Coupling Equivalent Model

Numerical Simulation on Hydrogen Induced Cracking Behavior of 4130X Hydrogen Storage Vessel with Defect

Review on Hydrogen-Induced Failure of Rubber O-Rings for High Pressure Hydrogen Storage Tanks

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

Effect of Swelling Behavior of Rubber Rings on the Sealing Performance for 70MPA Hydrogen Pressure Reducing Valves

Numerical Simulation for Hydrogen-Assisted Cracking: An Explicit Phase-Field Formulation

A Coupled Cohesive Modeling Approach for Predicting Fractures in Low Alloy Steel under High-Pressure Hydrogen Gas

A performance degradation model of nitrile butadiene rubber (NBR) O-rings for hydrogen permeation effects under high-pressure

Fracture Analysis of Rubber Sealing Material for High Pressure Hydrogen Vessel

Recent insights into hydrogen-induced blister fracture of rubber sealing materials: An in-depth examination

Phase field modeling of hydrogen release in nitrile-butadiene rubber composites after high-pressure hydrogen exposure

A multiscale phase field fracture approach based on the non-affine microsphere model for rubber-like materials

Numerical analysis of the fully-coupled continuum cohesive modeling on the hydrogen-assisted degradation behavior in high-strength steel

A Phase-Field Regularized Cohesion Model for Hydrogen-Assisted Cracking

Dynamic Response and Crack Propagation of Pre-Flawed Square Tube under Internal Hydrogen-Oxygen Detonation

Fracture Strain Model for Hydrogen Embrittlement Based on Hydrogen Enhanced Localized Plasticity Mechanism

Hydrogen diffusion behavior within microstructures near crack tip: A crystal plasticity study

Fretting Characteristics of Rubber X-Ring Exposed to High-Pressure Gaseous Hydrogen

Study on fretting behavior of rubber O-ring seal in high-pressure gaseous hydrogen

Prediction of hydrogen-assisted fracture under coexistence of hydrogen-enhanced plasticity and decohesion

Sealing performance analysis of rubber O-ring in high-pressure gaseous hydrogen based on finite element method