Abstract:The hysteresis of rubber materials due to deformation and viscoelasticity is the main reason for the heat build-up (HBU) and rolling resistance (RR) of the rolling tire. It is important to realize the high precision prediction of HBU and RR of tire for the optimal design of high-performance fuel-saving tire. In this work, a thermo-mechanical coupling method based on Endurica and Abaqus co-simulation was used to predict the steady-state temperature distribution and RR of three finite element models (Lagrangian–Eulerian model, Lagrangian model, and Plane Strain model) of the solid tires under different loads and rotating speeds. The simulation results were compared with the experimental results. The Kraus self-heating model was utilized in the thermo-mechanical coupling method, which realized the quantitative relationship between the dynamic loss modulus of rubber and the loading conditions (temperature, strain, and strain rate). Special attention was paid to the determination of the material parameters in the Kraus self-heating model. The comparison between simulation results and experimental results shows that the Lagrangian model had the highest prediction accuracy, and the average prediction errors of the steady-state surface temperature and RR under three loading conditions were 3.4% and 7.9%, respectively. The Lagrangian–Eulerian model came in the second with average errors of 9.7% and 11.1%, respectively. The Plane Strain model had the worst prediction accuracy, with the average errors of 21.4% and 44.6%, respectively. In terms of the simulation time, the Plane Strain model had the lowest cost, and the average calculation time was 1143 s. The Lagrangian–Eulerian model took the second place, with an average calculation time of 2621 s. The Lagrangian model had the highest computation cost, with an average time of 5597 s. The comparison between the simulation results and the experimental results verified the effectiveness of the thermo-mechanical coupling analysis method. The methods of three finite element models of the solid tires in this work can provide some reference for the optimization design of elastomeric components (Lagrangian model), pneumatic tires (Lagrangian–Eulerian model), and non-pneumatic tires (Plane Strain model).

Thermo-Mechanical Behavior of Tread Rubber During High-Speed Friction

High-speed Tribology Behaviors of Aircraft Tire Tread Rubber in Contact with Pavement

Thermo-mechanical-abrasive Coupling Analysis of Solid Rubber Tire under High-Speed Rolling

Effect of Temperature on Wear Performance of Aircraft Tire Tread Rubber

Regional morphological difference and evolution of tread rubber and its formation mechanism under high-speed sliding friction

Analysis of tire frictional energy loss based on longitudinal slip test

Experiment and Simulation Research on the Fatigue Wear of Aircraft Tire Tread Rubber

Heat Build-Up and Rolling Resistance Analysis of a Solid Tire: Experimental Observation and Numerical Simulation with Thermo-Mechanical Coupling Method

Research on simplified tire finite element modeling and simulation method

Thermo-mechanical coupling analysis of transient temperature and rolling resistance for solid rubber tire: Numerical simulation and experimental verification

An Integrated Approach for Friction and Wear Simulation of Tire Tread Rubber. Part I: Friction Test, Characterization, and Modeling

Experimental Study on the High-Speed Frictional Behavior Between the Tire and Asphalt Pavement

Synergic effects of physio‐mechanical performances on sliding‐rolling tribological and abrasion behaviors of polyisoprene based aviation tire treads

Finite Element Analysis of the Thermal Characteristics and Parametric Study of Steady Rolling Tires

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Experimental and Numerical Studies on Tire Tread Block Friction Characteristics Based on a New Test Device

Thermal Penetration of Aircraft Tyre Tread at Touchdown

A detailed tire tread friction model considering dynamic friction states

Experimental and Numerical Study of Frictional Contact Behavior of Rolling Tire

Rubber Friction on Icy Pavement: Experiments and Modeling

Rubber friction: role of the flash temperature