Abstract:High entropy alloys (HEAs) with grain-scale heterogeneous structure and coherent precipitates have shown promising mechanical properties with gigapascal strength and considerable ductility. However, the origins of the excellent ductility of the HEAs with both precipitates and grain-scale heterogenous structure are relatively less explored and not well understood. It is also still challenging for HEAs to obtain such precipitated heterogenous microstructure with efficient and economical thermomechanical processing procedures. Here, through a single-step heat treatment, we developed a Ni2CoCrFeTi0.24Al0.2 HEA with excellent yield strength of ∼1.3 GPa and tensile elongation of ∼20%. Using multiple length-scale characterizations and micro-digital image correlation analysis, we revealed the strengthening and toughening mechanisms of the novel HEA. Our results show that the grain-scale heterogenous structure with L12 precipitates ranging from ∼10 – 100 nm is responsible for the excellent strength-ductility combination. The good ductility is attributed to the strain-partitioning-induced additional deformation modes, i.e. deformation twinning and microbands, as well as the efficient hetero-deformation induced strain hardening. The superior yield strength is mainly due to the effective combination of precipitation hardening and dislocation strengthening. These findings not only provide a facile route to develop strong and ductile alloys, but also deepen the understanding on the deformation mechanism of hetero-structured materials.

Discontinuous Coarsening Leads to Unchanged Tensile Properties in High-Entropy Alloys with Different Recrystallization Volume Fractions

Effect of partial recrystallization on microstructure and tensile properties of NiFeCoCrMn high-entropy alloy

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Breaking the Strength-Ductility Trade-off Via Heterogeneous Structure in FeCoCrNiMo0.2 High-Entropy Alloy

Tensile behaviors and hetero-deformation-induced hardening mechanisms in medium entropy alloys with dual gradients of grain size and coherent nanoprecipitate

Strain partitioning enables excellent tensile ductility in precipitated heterogeneous high-entropy alloys with gigapascal yield strength

Hierarchical Grain Size and Nanotwin Gradient Microstructure for Improved Mechanical Properties of a Non-Equiatomic CoCrFeMnNi High-Entropy Alloy

Simultaneously enhancing strength–ductility synergy in refractory high entropy alloys by a heterogeneous structure design

Effect of Thermomechanical Processing on Microstructure and Mechanical Properties of CoCrFeNiMn High Entropy Alloy

High Density of Interfaces with Severely Mechanical Difference Controlled High Ductility in Heterogeneous Materials Based on Crystal Plasticity

Effect of compositional heterogeneity on the mechanical properties of a single-phase Cu-9Al alloy with different grain sizes

Strong and ductile CrCoNi medium-entropy alloy via dispersed heterostructure

Achieving High Strength and Ductility in High-Entropy Alloys Via Spinodal Decomposition-Induced Compositional Heterogeneity

Sustaining strength–ductility synergy of CoCrFeNiMn high entropy alloy by a multilevel heterogeneity associated with nanoparticles

Enhanced tensile properties by heterogeneous grain structures and coherent precipitates in a CoCrNi-based medium entropy alloy

Annealing-induced Multi-Heterogeneous Microstructure Strengthening in FeCoCrNiMo0.2 High-Entropy Alloys

Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification

Microstructure Evolution from Homogeneous As-Cast State to Annealed Heterogeneous Structure and Mechanical Properties of Al-Zn-Mg-Cu Alloys with Trace Tib2 Particles

Simultaneous enhancement of strength and ductility by combining heterogeneous microstructure and nanoprecipitates

The Role of Nanoscale Heterogeneous Structure in Simultaneously Enhancing Strength and Ductility of High-Oxygen Ti–6Al–4V Alloy

Strengthening mechanism of CrCoNi medium-entropy alloy from the partially recrystallized structure to the fully recrystallized heterogeneous structure