Abstract:Meso-structural models are presently in common use for analysis of the mechanical behaviour, damage evolution and failure of concrete. These are constructed either from XCT images, or in silico, using statistical information about concrete's meso-scale constituents. As a minimum, such models include mortar and aggregates as separate phases, while more detailed versions consider the interfacial transition zones (ITZ) between mortar and aggregates, and voids. Analyses of given meso-structures vary further by different constitutive modelling of constituents, with past works focusing on parameters' calibration using experiments with one loading condition - either tension or compression. Using a detailed meso-structure representation, this work proposes a novel combination of constitutive relations, involving concrete damage plasticity (CDP) for mortar and cohesive zone behaviour for ITZ. CDP parameters are calibrated using both compression and tension experiments with mortar samples. ITZ parameters are calibrated by comparing simulated stress–strain curves and failure patterns with data from compression and tension experiments with concrete samples. This process leads to constitutive relations, applicable to both loading conditions, which has not been demonstrated previously, but is essential to extending the modelling approach to complex stress states encountered in real engineering structures. After establishing the realism of the approach, parametric studies are conducted to investigate the effects of friction between loading plate and specimen, the mortar dilation angle, the ITZ cohesive stiffness, critical stresses, fracture energy and mix mode ratio. The results show that mortar plasticity is the dominant energy dissipation mechanism in both compression and tension, and its rate governs the localisation of damage. The effect of ITZ parameters on the tensile behaviour is found to be negligible. Their effect on the compressive behaviour is found to be limited, but sufficient to propose a set of parameters working for both conditions. Importantly, under both loadings the ITZ is found to control failure localisation into a macroscopic crack in combination with mortar plasticity and damage. Predicted stress-stain curves, damage evolution and macro-crack propagation are shown to be in very good agreement with the experimental observations. This justifies the use of the proposed experimental-modelling strategy for developing models for analysis of complex loading conditions.

Formulation, Implementation, and Validation of a 3D Damage-Plasticity Cohesive-Interface Model with Multiple Yield Surfaces for Cyclic Modeling of Mortar Joints

Modeling of Masonry Structures Using a New 3D Cohesive Interface Material Model Considering Dilatancy Softening

A robust computational strategy for failure prediction of masonry structures using an improved multi‐surface damage‐plastic based interface model

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

THREE-DIMENSIONAL MESO-SCALE COHESIVE FRACTURE MODELING OF CONCRETE USING A PYTHON SCRIPT IN ABAQUS

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Triaxial Elastoplastic Damage Constitutive Model of Unreinforced Clay Brick Masonry Wall

Slip-enhanced plastic-damage constitutive model for masonry structures

Experimentally Validated Meso-Scale Fracture Modelling of Mortar Using Output from Micromechanical Models

A 3D Pilot Simulation of Masonry Walls Retrofitted with Steel Strips Using a Novel Meso-Scale Damage-Plasticity Interface Model

Experimental and numerical investigation of mortar and ITZ parameters in meso-scale models of concrete

Mechanical Properties and Damage Plastic Model for Cement-Soil Mortar: Laboratory Tests and Numerical Analysis

Modelling of 3D Brick‐and‐Mortar Structures using Cohesive Zone Finite Elements

A mesoscopic model of masonry structure with block-interface system

3D hybrid modelling approach combining the finite and discrete element methods: Validation based on masonry shear wall tests

A Coupled Elastoplastic Damage Model for Clayey Rock and Its Numerical Implementation and Validation

A 2D Generic Multi-Surface Cohesive Zone Model for Simulating FRP-to-concrete Mixed-Mode Debonding Failure

3D Numerical Investigation of Cement Mortar with Microscopic Defects at High Strain Rates

About the Use of Concrete Damage Plasticity for Modeling Masonry Post-Elastic Behavior

Modeling Cyclic Crack Propagation in Concrete Using the Scaled Boundary Finite Element Method Coupled with the Cumulative Damage-Plasticity Constitutive Law

Mesoscopic Numerical Simulation of Fracture Process and Failure Mechanism of Cement Mortar