Abstract:Hard carbon (HC) is considered to be an anode material with great promise for sodium-ion batteries (SIBs), on account of the advantages of high reversible specific capacity and abundant source. Nevertheless, its poor high-rate and long-term cycle performance, which were caused by the unrestricted decomposition of the electrolyte and sustained formation of the solid–electrolyte interface (SEI) film, limit the practical use. Herein, the balance between high mechanical strength and good flexibility of the SEI layer formed in the discharge/charge process was achieved by modifying the surface of the HC anode with a proper amount of AlF3 coating. In this way, the reversible specific capacity increased from 322 to 346 mA h g–1 at 20 mA g–1. Furthermore, the capacity retention at 100 mA g–1 for 100 cycles of the modified sample considerably increased from 47.4 to 76.5%, as well as rate performance was significantly improved from 69 to 135 mA h g–1 at 200 mA g–1. The improvement of performance is mainly attributed to the rational distribution of organic–inorganic phase components in the SEI film (about 43% inorganic phase and 57% organic phase), which ensures the stability of the SEI layer in the continuous discharge/charge process, resulting in a superior performance. Therefore, this work not only provides an effective method to synthesize HC anode with high electrochemical performance in SIBs but also clearly illustrates the mechanism of how the coating affects the composition of the SEI film to improve the performance of materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01497.SEM images of HC particles; PSD diagram; TG curve; XRD pattern and Raman spectrum photograph; infrared spectra; EDS spectrum of the profile and EDS images of the electrode surface after five cycles; CV curves and rate capability diagram under different experimental conditions; and charge–discharge curves and cycle performance diagram at 20 mA g–1 of 3.0 wt % 3 (PDF)This article has not yet been cited by other publications.

A Bifuctional Presodiation Reagent for Hard Carbon Anodes Enhancing Performance of Sodium-Ion Batteries

Biomass‐Derived Phosphorus‐Doped Porous Hard Carbon Anode for Stable and High‐Rate Sodium Ion Batteries

Molecular Engineering Enabling High Initial Coulombic Efficiency and Rubost Solid Electrolyte Interphase for Hard Carbon in Sodium‐Ion Batteries

Boosting the Reversible, High‐Rate Na + Storage Capability of the Hard Carbon Anode Via the Synergistic Structural Tailoring and Controlled Presodiation

Solid Electrolyte Interphase Composition Regulation via Coating AlF 3 for a High-Performance Hard Carbon Anode in Sodium-Ion Batteries

Engineering Al2O3 Atomic Layer Deposition: Enhanced Hard Carbon-Electrolyte Interface Towards Practical Sodium Ion Batteries

Surface engineering based on in situ electro-polymerization to boost the initial Coulombic efficiency of hard carbon anode for sodium-ion battery

On the Practicability of the Solid‐State Electrochemical Pre‐Sodiation Technique on Hard Carbon Anodes for Sodium‐Ion Batteries

Non-destructive Chemical Prelithiation of VO2(B) Anodes Constructing a Multifunctional Interphase Layer for Advanced Li-Ion Batteries

Sustainable Fabrication of a Practical Hard Carbon Anode for a Sodium-Ion Battery with Unprecedented Long Cycle Life

Lithium‐Pretreated Hard Carbon as High‐Performance Sodium‐Ion Battery Anodes

Application of Sodium-Rich Multifunctional Hard Carbon Synthesized via Multi-Alloy Grafting Strategy for Presodiation in High-Performance Sodium-Ion Batteries

Ameliorating the Sodium Storage Performance of Hard Carbon Anode Through Rational Modulation of Binder

A functional cathode sodium compensation agent for stable sodium-ion batteries

Precisely Tunable Instantaneous Carbon Rearrangement Enables Low‐Working‐Potential Hard Carbon Toward Sodium‐Ion Batteries with Enhanced Energy Density

Full-Cell Presodiation Strategy to Enable High-Performance Na-Ion Batteries

Flexible Precursor Modulation toward Selective Heteroatom Doping in a Hard-Carbon Anode for Sodium-Ion Batteries

Rational Design of a Trifunctional Binder for Hard Carbon Anodes Showing High Initial Coulombic Efficiency and Superior Rate Capability for Sodium‐Ion Batteries

High‐Performing All‐Solid‐State Sodium‐Ion Batteries Enabled by the Presodiation of Hard Carbon

Understanding the Sodium Storage Behavior of Closed Pores/Carbonyl Groups in Hard Carbon