Abstract:Cement solidification is essential to reduce heavy metal leaching from industrial sludge and make it recyclable. This paper studied the effect of aggregate grading optimized by sludge containing heavy metal of different particle sizes on the performance of baking-free sludge bricks, which was mixed with industrial sludge cured by both micro-silica fume and cement. First, the gradation of fine natural aggregates was adjusted according to the Fuller curve. Fine aggregates in baking-free bricks were replaced by artificially processed sludge with particle sizes of 0.15 mm ~0.3 mm and 2.36 mm ~4.75 mm. In this case, a mixed proportion scheme was designed. Then, the strength, water absorption, porosity, and heavy metal leaching were measured. With the help of nuclear magnetic resonance (NMR) and scanning electron microscopy (SEM), the phase and pore structures were observed. The test results showed that: (1) Sludge can replace part of the fine aggregates to make baking-free bricks, resulting in the reduction of the strength of baking-free bricks, but the strength still meets the standard strength requirements of GB/T 21,144-2007. (2) When fine aggregates are partly replaced by sludge with finer particle sizes, baking-free sludge bricks exhibit higher strength, lower water absorption, better pore structures and microphase structure, and stronger solidification of heavy metals, the leaching number of heavy metals meets the standard requirements of GB5085.3-2007, which will be provided support for actual industrial production.Implications: Cement solidification is an essential means to reduce the heavy metal leaching from industrial sludge and make it recyclable. This paper studied sludge containing heavy metal of different particle sizes on the performance of baking-free sludge bricks. This paper analyzed the compressive strength, porosity and water absorption of baking-free bricks mixed with sludge of different partical sizes, and adopted the NMR to characterize the pores of baking-free bricks, and the SEM to observe the baking-free bricks resultants and the interfacial transition zone (ITZ). The heavy metal leaching test verified the environmental benefits of baking-free bricks mixed with sludge instead of aggregates. There not only make full use of solid wastes, but also thus minimizing pollution to the environment, which provide support for actual industrial production and a reference for studying industrial sludge recycling technology.

Mechanical and Microstructural Analysis of Lightweight Subgrade Bricks Synthesized from Mixtures of Coal Fly Ash and Sewage Sludge

Lightweight bricks manufactured from ground soil, textile sludge, and coal ash

Recycling Reuse of Municipal Sewage Sludge in Sustainable Structural Materials: Preparation, Properties, Crystallization and Microstructure Analyses

Raw Material Design, Sintering Temperature Optimization and Development Mechanism Investigation of Self-Foaming Porous Bricks with High Solid Waste Addition

Fabrication, Microstructure and Properties of Bricks Fired from Lake Sediment, Cinder and Sewage Sludge

Utilization of Drinking Water Treatment Sludge with Coal Fly Ash to Make Permeable Bricks for Low Impact Development

Performance and Microstructure of Sustainable Cementitious Materials Mixed by Municipal Sewage Sludge Ash, Slag, and Fly Ash

Preparation, characteristics and mechanisms of the composite sintered bricks produced from shale, sewage sludge, coal gangue powder and iron ore tailings

Fabrication, Performance And Environmental Safety Of Fired Bricks From Lake Silt And Sewage Sludge Iccs16

Effect of Sewage Sludge Addition on Microstructure and Mechanical Properties of Kaolin-Sewage Sludge Ceramic Bricks

Utilization of river sediment, sewage sludge and wheat straw as the primary raw material in sintered-shale bricks

Effect of industrial sludge particle size on the performance of baking-free sludge bricks

Preparation,properties and environmental safety of fired bricks made from lake silt and sewage sludge

Development of Lightweight Aggregate from Dry Sewage Sludge and Coal Ash

Synergistic Effects of Amorphous Porous Materials and Anhydrous Na2CO3 on the Performance of Bricks with High Municipal Sewage Sludge Content

Microstructure and Strength of Alkali-Activated Bricks Containing Municipal Solid Waste Incineration (MSWI) Fly Ash Developed As Construction Materials

Comprehensive Utilization of Blast Furnace Slag, Municipal Sludge and Kaolin Clay in Building Brick Manufacture: Crystalline Transformation, Morphology Observation and Property Assessment

Production of Water-Permeable Ceramic Bricks Derived from Fly Ash Via a Simple Pellet Method: Mechanism of Mechanical Strength and Permeability

Mechanical Properties and Microstructure of Non-calcination Sludge Brick

Recycling of sewage sludge in clay-free thermal insulation brick: assessment of microstructure, performance, and environment impact

Comprehensive Performance Study of Aluminum Ash and Calcium Carbide Slag for Brick Making under Ultra-High Pressure