Abstract:This work aims to elucidate the interaction between hydrogen atoms and pre-introduced dislocations in commercially pure titanium (CP-Ti). Positron annihilation spectroscopy supplemented by the first-principle calculations was utilized to reveal the effects of dislocation densities on the formation of hydride types and the concentration of hydrogen-induced defects in CP-Ti. Results show that, in the hydrogen-charged sample with 40 % deformation, hydrogen-induced damage gradually decreases when the hydrogen enters the sample at a depth of about 350 nm. This finding suggests that the high-density dislocations present in deformed specimens effectively trap hydrogen atoms and inhibit their diffusion, which ultimately mitigate damage within the samples. γ-TiH and δ-TiH 2 hydrides are observed in the hydrogen-charged sample. The thermal desorption spectroscopy results show that the desorption amount of deuterium decreases from 1.14 × 10 18 D/cm 2 to 5.10 × 10 17 D/cm 2 with an increase in dislocation density because dislocations inhibit the diffusion of deuterium. In samples with higher deformation, the high dislocation density inhibits the formation of δ-TiH 2 hydrides and promotes the formation of γ-TiH hydrides, which significantly reduce the hardening of samples. These results provide insight into the interaction of hydrogen with pre-introduced defects and provide strong theoretical support for the development and improvement of more damage-resistant materials.

Experiments and DFT Calculations on the Effects of Interstitial Hydrogen on Ti Corrosion Products in High Temperature Water

Effects of in-situ hydrogen charging on the oxide film of iron in high-temperature water: Experiments and DFT calculations

Influence of Fe Content on the Microstructure and Hydrogen Storage Properties of Ti16Zr5Cr22V57−xFex (x = 2–8) Alloys

Studies of hydrogen storage properties and absorption-desorption mechanism of FeTi1.3(Mm)y alloy

Effects of hydrogen charge on the intergranular corrosion of high-defect-density ultrapure ferrite stainless steel

[Proto-oncogene C-erbB-2 and human cancer].

Spin-polarized DFT calculations of elemental effects on hydrogen atom adsorption on FeCrAl (110) surface

Effects of heat treatment on hydriding/dehydriding characteristics of Ti18Cr24V55Zr3 alloy

Effect of hydrogen on the structural and phase state and defect structure of titanium alloy

Electrochemical Hydrogen Charging on Corrosion Behavior of Ti-6Al-4V Alloy in Artificial Seawater

Influence of hydrogen on the elastic properties and dislocation behavior in Fe–Cr and Fe–Ni alloys by DFT calculations

Effect of pre-deformation on hydrogen diffusion and hydrogen induced damage in commercially pure titanium

Effect of hydrogen charging on the corrosion behavior of a body-centered cubic FeCrV medium entropy alloy

Impact of Diffusible Hydrogen on Corrosion of Alloy 600 at 288°C: an In-Situ Electrochemical Study

Effects of oxygen adsorption on the corrosion behavior of the Ti(0001) surface: a DFT investigation

Hydrogen-surface interaction from first-principles calculations and its implication to hydrogen embrittlement mechanisms of titanium

Effect of electrochemical hydrogen charging on the mechanical property and corrosion behavior of Ti-3Mo alloy

First-Principles Study on the Adsorption Characteristics of Corrosive Species on Passive Film TiO2 in a NaCl Solution Containing H2S and CO2

Influence of hydrogen behaviors on tensile properties of equiatomic FeCrNiMnCo high-entropy alloy

Effect of hydrogen on the microstructure and mechanical properties of FeCCrNiB x Si advanced high strength steels

Role of intracrystalline hydrogen on the ductility of dilute Ti-based alloys by first-principles calculations