Abstract:The surface morphology and pitting susceptibility of 445J1M ferritic stainless steel in a NaCl solution before and after hydrogen charging were investigated using the atomic force microscope, X-ray photoelectron spectroscopy (XPS), potentiodynamic polarization, critical pitting temperature and the electrochemical impedance spectroscopy measurements. The content of hydrogen in 445J1M stainless steel increased from 1.7 ppm to 4.8 ppm with increasing the hydrogen-charging current density from 0 mA/cm(2) (uncharged) to 25 mA/cm(2). Hydrogen charging has induced blisters on the sample surface but not caused significant changes in the surface roughness. The size of hydrogen blisters on the samples increased with the rise of hydrogen charging current density. No direct connection could be found between the locations of hydrogen blisters and pitting nucleation. The pitting susceptibility and the instability of passive films both increased with the hydrogen-charging current density as shown by the electrochemical and XPS results. The breakdown potential decreased significantly with the increase of hydrogen-charging current density, accompanied by an increased passive current density. The decreased content of metal oxides in the passive films and the additional hydrogen oxidation reactions related to the permeated hydrogen can account for the deteriorated corrosion performance of the 445J1M ferritic stainless steel after hydrogen charging. (C) 2018 The Electrochemical Society.

Effects of in-situ hydrogen charging on the oxide film of iron in high-temperature water: Experiments and DFT calculations

Hydrogen charging effects on the alternation of oxide film formed on Ni, Cr and Alloy 690 in high-temperature water

Combined Dual-Exposure Test and Dft Investigations into Effects of Interstitial Hydrogen on Oxide Film of Alloy 600 in High Temperature Water

Effects of hydrogen charge on the intergranular corrosion of high-defect-density ultrapure ferrite stainless steel

Determination of the Hydrogen Effects on the Passive Film and the Micro-Structure at the Surface of 2205 Duplex Stainless Steel

Experiments and DFT Calculations on the Effects of Interstitial Hydrogen on Ti Corrosion Products in High Temperature Water

Synergistic Effect of Solid State Hydrogen and Cold Work Pretreatment on Oxide Films Grown on 316L Stainless Steel during Short Term Immersion in Deaerated High Temperature Water at 300 °C

Effect of hydrogen charging on the corrosion behavior of a body-centered cubic FeCrV medium entropy alloy

Atomistic Insights into Interfacial Reactions of FeCr2O4 Oxide Films in High-Temperature Water

Experimental And Computational Investigation Of The Optical, Electronic, And Electrochemical Properties Of Hydrogenated Alpha-Fe2o3

The effect of hydrogen on the mechanical properties of high purity iron I. Softening and hardening of high purity iron by hydrogen charging during tensile deformation

Effect of hydrogen charging time on hydrogen blister and hydrogen-induced cracking of pure iron

Giant Conductivity Enhancement of Ferrite Insulators Induced by Atomic Hydrogen

Spin-polarized DFT calculations of elemental effects on hydrogen atom adsorption on FeCrAl (110) surface

Effects of hydrogen on passivation and semiconductive properties of passive film on Fe-based amorphous coatings

Effect of Hydrogen Charging Conditions on Hydrogen Blisters and Pitting Susceptibility of 445J1M Ferritic Stainless Steel

EFFECT OF HYDROGEN ON ELECTRONIC PROPERTIES OF PASSIVE FILM ON PURE IRON

Effect of H on Mechanical Properties and Corrosion Resistance of Ferritic/Martensitic Steels with Different Si Contents

The Adsorption Mechanism of Hydrogen on FeO Crystal Surfaces: A Density Functional Theory Study

Hydrogen-enhanced oxidation of ferrite phase in stainless steel cladding and the contribution to stress corrosion cracking in deaerated high temperature water

The effect of hydrogen on the passivity of iron-based and nickel-based amorphous alloys