Abstract:One kind geopolymer composite cementitious material was synthesized under the activation of modified water glass, using reclaimed lime-fly ash macadam powder (RLFMP) as basic raw material, fly ash (FA) and ordinary Portland cement (OPC) as compound additive. The effects of OPC content, alkali content, water glass modulus and water-solid ratio on the setting time, compressive and flexural strength of the geopolymers cured at room temperature were investigated by orthogonal experiment. In addition, the mineralogical phases, micromorphology and pore distribution characteristics of the final products were characterized through X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) coupled with Energy Dispersive Spectroscopy (EDS), Fourier Transform Infrared Spectroscopy (FTIR) and Mercury Intrusion Porosimetry (MIP). The results indicated that the OPC content had the most significant effect on the setting time and mechanical properties of geopolymers. With the increase of OPC content, the setting time of geopolymer mortars was greatly shortened, and the compressive strength and flexural strength were obviously improved. When OPC content was 10% of the total cementitious powder mass, alkali content was 11%, water glass modulus was 1.4, and water-solid ratio was 0.35, the 28 day compressive strength of geopolymer pastes cured at room temperature reached the highest of 43.2 MPa. Microstructure analysis showed that the incorporation of OPC promoted the full dissolution of silicaalumina raw materials in alkaline environment, improved the degree of geopolymerization and formed the C(A)-S-H gel products in the reaction system. The C-(A)-S-H gel products were synergistic with the N-A-S-H gel products generated by pure geopolymerization to enhance the compactness and adhesion of the matrix, which was conducive to the improvement of the mechanical properties of geopolymer. This study demonstrates the feasibility of preparing geopolymer with RLFMP at room temperature, which widens the source of geopolymer raw materials and provides a new type of geopolymer composite.

Early Age Reaction, Rheological Properties, and Environment Impact of NaOH-activated Fly Ash Mixtures at Ambient Environment

Impacts of Alkaline Washing Pretreatment on Municipal Solid Waste Incineration Fly Ash (MSWI FA) and Resulting Geopolymers

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Comparative Thermal and Mechanical Performance of Geopolymers Derived from Metakaolin and Fly Ash

Accelerated Carbonation Pretreatment of Municipal Solid Waste Incineration Fly Ash and Its Conversion to Geopolymer with Coal Fly Ash

Expansion in low calcium fly ash-based geopolymer concrete: chemical factors influenced by silica fume and NaOH concentration

Preparation and properties of geopolymer containing phosphoric acid-activated fly ash and mechanically-milled kaolinite: Experiments and density function theory

Orthogonal analysis and mechanism of compressive strength and microstructure of the metakaolin-fly ash geopolymer

Utilization of OPC and FA to enhance reclaimed lime-fly ash macadam based geopolymers cured at ambient temperature

Development of Metakaolin–fly Ash Based Geopolymers for Fire Resistance Applications

Synthesis and Characterization of Geopolymer Prepared from Circulating Fluidized Bed-Derived Fly Ash

Synthesis of Geopolymers Incorporating Mechanically Activated Fly Ash Blended with Alkaline Earth Carbonates: A Comparative Analysis

A Clean Approach to High-Strength Fly Ash-Based Geopolymers: Multi-Granular Screening with NaAlO2 Enhancement

Assessing the Viability of a High Performance One-Part Geopolymer Made from Fly Ash and GGBS at Ambient Temperature

Optimization of Technological Parameters for Preparation of Geopolymers Fabricated with Pulverized Fly Ash

Effect of Municipal Solid Waste Incineration Fly Ash on the Mechanical Properties and Microstructure of Geopolymer Concrete

Fast setting and high early strength alkali-activated fly ash synthetized with pre-polymerized suspension combined with ultrafine fly ash at ambient temperature

Low-carbon wet-ground fly ash geopolymer activated by single calcium carbide slag

A high-strength red mud–fly ash geopolymer and the implications of curing temperature

Effect of Synthesis Parameters on the Alkali Activation Reaction Degree and the Relationship Between Reaction Degree and Microstructure of Fly Ash-Based Geopolymers

Utilization of Calcium Carbide Residue as Solid Alkali for Preparing Fly Ash-Based Geopolymers: Dependence of Compressive Strength and Microstructure on Calcium Carbide Residue, Water Content and Curing Temperature