Abstract:This research systematically investigates the influence of raw material particle size and calcium content on the geopolymerization process to gain insight into the physical and mechanical properties of geopolymer gels, including setting time, fluidity, pore structure, compressive strength, and leaching characteristics of encapsulated Cr3+ heavy metal ions. Utilizing a diverse range of particle sizes of metakaolin (MK; 3.75, 7.5, and 12 μm) and fly ash (FA; 18, 45, and 75 μm), along with varied calcium levels, this study assesses the dual impact of these factors on the final properties of both metakaolin- and fly-ash-based geopolymers. Employing sophisticated analytical techniques such as Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and Nuclear Magnetic Resonance (NMR), the research meticulously documents alterations in chemical bonding, micro-morphology, and pore structures. Key findings reveal that reducing the size of MK and FA particles to 3.75 and 18 μm, respectively, enhances the compressive strength of their matrices by 128.37 and 297.58%, respectively, compared to their original values (63.59 and 33.87 MPa, respectively) at larger particle sizes. While smaller particle sizes significantly bolster compressive strength, they adversely affect slurry flow and reduce the leaching rates of Cr3+ from MK- and FA-based matrices, reaching 0.42 and 0.75 mg/L at 3.75 and 18 μm, respectively. Conversely, increased calcium content markedly enhances setting times and contributes to the formation of dense microstructures through the production of calcium aluminate silicate hydrate (C-A-S-H) gels, thus improving the overall curing performance and durability of the materials. These insights underline the importance of fine-tuning particle size and calcium content to optimize geopolymer formulations, offering substantial benefits for varied engineering applications and promoting more sustainable construction practices.

Synthesis and Characterization of Geopolymer Prepared from Circulating Fluidized Bed-Derived Fly Ash

Synthesis and Properties of Fly Ash Geopolymer with Dyeing Sludge

Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer

Feasibility analysis of the preparation of geopolymers from different types of coal based ash: Reaction, synthesis, and properties

Study the Mechanical Properties of Geopolymer under Different Curing Conditions

Utilization of Calcium Carbide Residue as Solid Alkali for Preparing Fly Ash-Based Geopolymers: Dependence of Compressive Strength and Microstructure on Calcium Carbide Residue, Water Content and Curing Temperature

Synthesis Factors Affecting Mechanical Properties, Microstructure, and Chemical Composition of Red Mud–fly Ash Based Geopolymers

Reaction Kinetics of Red Mud-Fly Ash Based Geopolymers: Effects of Curing Temperature on Chemical Bonding, Porosity, and Mechanical Strength

A high-strength red mud–fly ash geopolymer and the implications of curing temperature

Physico-chemical properties and durability of a fly-ash-based geopolymer

Mechanical behavior and microstructure evolution of slag-fly ash based geopolymer stabilized sand

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Mechanical Properties of Geopolymers Synthesized from Fly Ash and Red Mud under Ambient Conditions

Mechanical and microstructural characterization of geopolymers synthesized from FCC waste catalyst and silica fume

Performance Optimization of FA-GGBS Geopolymer Based on Response Surface Methodology

Preparation and properties of geopolymer containing phosphoric acid-activated fly ash and mechanically-milled kaolinite: Experiments and density function theory

Efflorescence of fly ash-based geopolymer mortars under quasinatural conditions: The relationship between curing temperature, ion transport, and compressive strength

The Influence of Particle Size and Calcium Content on Performance Characteristics of Metakaolin- and Fly-Ash-Based Geopolymer Gels

Cleaner geopolymer prepared by co-activation of gasification coal fly ash and steel slag: durability properties and economic assessment

Setting and Hardening Behaviour of Alkali-Activated Landfilled Fly Ash–Slag Binder at Room Temperature

Effect of Curing Temperature on High-Strength Metakaolin-Based Geopolymer Composite (HMGC) with Quartz Powder and Steel Fibers