Abstract:Developing high-performance electrode materials is in high demand for the development of supercapacitors. Herein, defect and interface engineering has been simultaneously realized in NiMoO4 nanowire arrays (NWAs) using a simple sucrose coating followed by an annealing process. The resultant hierarchical oxygen-deficient NiMoO4@C NWAs (denoted as “NiMoO4−x@C”) are grown directly on conductive ferronickel foam substrates. This composite affords direct electrical contact with the substrates and directional electron transport, as well as short ionic diffusion pathways. Furthermore, the coating of the amorphous carbon shell and the introduction of oxygen vacancies effectively enhance the electrical conductivity of NiMoO4. In addition, the coated carbon layer improves the structural stability of the NiMoO4 in the whole charging and discharging process, significantly enhancing the cycling stability of the electrode. Consequently, the NiMoO4−x@C electrode delivers a high areal capacitance of 2.24 F cm−2 (1720 F g−1) at a current density of 1 mA cm−2 and superior cycling stability of 84.5% retention after 6000 cycles at 20 mA cm−2. Furthermore, an asymmetric super-capacitor device (ASC) has been constructed with NiMoO4−x@C as the positive electrode and activated carbon (AC) as the negative electrode. The as-assembled ASC device shows excellent electrochemical performance with a high energy density of 51.6 W h kg−1 at a power density of 203.95 W kg−1. Moreover, the NiMoO4//AC ASC device manifests remarkable cyclability with 84.5% of capacitance retention over 6000 cycles. The results demonstrate that the NiMoO4−x@C composite is a promising material for electrochemical energy storage. This work can give new insights on the design and development of novel functional electrode materials via defect and interface engineering through simple yet effective chemical routes.

Defect‐Driven Reconstruction of Na‐Ion Diffusion Channels Enabling High‐Performance Co‐Doped TiO2 Anodes for Na‐Ion Hybrid Capacitors

Confined Seeds Derived Sodium Titanate/graphene Composite with Synergistic Storage Ability Toward High Performance Sodium Ion Capacitors

Defect-Induced and Synergistic Na-Ion Storage Capability of TiO<sub>2</sub>(B)@MoSe<sub>2</sub>/Carbon Trinity for Ultrafast and Ultralong Cycling

Construction of Self-Supported TiO2 Nanotube Arrays with Hybrid Point Defect Engineering: A Bifunctional Anode for Li+/Na+ Storage

S/N Co-Doped Ultrathin TiO2 Nanoplates as an Anode Material for Advanced Sodium-Ion Hybrid Capacitors

Enhanced Ionic/Electronic Transport in Nano‐TiO2/Sheared CNT Composite Electrode for Na+ Insertion‐based Hybrid Ion‐Capacitors

Self-Supported NaTi2(PO4)3 Nanorod Arrays: Balancing Na+ and Electron Kinetics Via Optimized Carbon Coating for High-Power Sodium-Ion Capacitor

Boosting the Rate Capability of Multichannel Porous TiO2 Nanofibers with Well-Dispersed Cu Nanodots and Cu2+-doping Derived Oxygen Vacancies for Sodium-Ion Batteries

Thermal-induced Interlayer Defect Engineering Toward Super High-Performance Sodium Ion Capacitors

Mechanically flexible V3S4@carbon composite fiber as a high-capacity and fast-charging anode for sodium-ion capacitors

Weak Ionization Induced Interfacial Deposition and Transformation towards Fast‐Charging NaTi 2 (PO 4 ) 3 Nanowire Bundles for Advanced Aqueous Sodium‐Ion Capacitors

Enhanced Cathode and Anode Compatibility for Boosting Both Energy and Power Densities of Na/K-Ion Hybrid Capacitors

Sodium-ion Capacitors with Superior Energy-Power Performance by Using Carbon-Based Materials in Both Electrodes

Synchronous Defect and Interface Engineering of NiMoO4 Nanowire Arrays for High-Performance Supercapacitors

Carbon-incorporated NaTi2(PO4)3 on carbon cloth as a binder-free anode material for high-performance aqueous sodium-ion hybrid capacitors

Mn3O4 Nanoparticles in Situ Embedded in TiO2 for High-Performance Na-ion Capacitor: Balance Between 3D Ordered Hierarchically Porous Structure and Heterostructured Interfaces

Synergistically Tailoring the Electronic Structure and Ion Diffusion of Atomically Thin Co(OH)2 Nanosheets Enable Fast Pseudocapacitive Sodium Ion Storage

Synergistic Engineering of Defects and Architecture in Co3O4@C Nanosheets Toward Li/Na Ion Batteries with Enhanced Pseudocapacitances

Interwoven scaffolded porous titanium oxide nanocubes/carbon nanotubes framework for high-performance sodium-ion battery

Oxygen Vacancies‐Rich TiO2/C Nanofibers with Boron, Nitrogen Dual‐Doping for Ultrafast Sodium Storage

Enhancing Pseudocapacitive Behavior of MOF-derived TiO2-x@Carbon Nanocubes Via Mo-doping for High-Performance Sodium-Ion Capacitors