Abstract:Sodium superionic conductors (NASICONs) show significant promise for application in the development of cathodes for sodium-ion batteries (SIBs). However, it remains a major challenge to develop the desired multi-electron reaction cathode with a high specific capacity and energy density. Herein, we report a novel NASICON-type Na3.5MnCr0.5Ti0.5(PO4)3 cathode obtained by combining electrospinning and stepwise sintering processes. This cathode exhibits a high discharge capacity of 160.4 mAh g−1 and operates at a considerable medium voltage of 3.2 V. The Na3.5MnCr0.5Ti0.5(PO4)3 cathode undergoes a multi-electron redox reaction involving the Cr3+/4+ (4.40/4.31 V vs. Na/Na+), Mn3+/4+ (4.18/4.03 V), Mn2+/3+ (3.74/3.41 V), and Ti3+/4+ (2.04/2.14 V) redox couples. This redox reaction enables a three-electron transfer during the Na+ intercalation/de-intercalation processes. As a result, the Na3.5MnCr0.5Ti0.5(PO4)3 demonstrates a significant enhancement in energy density, surpassing other recently reported SIB cathodes. The highly reversible structure evolution and small volume changes during cycling were demonstrated with in-situ X-ray diffraction, ensuring outstanding cyclability with 77% capacity retention after 500 cycles. Furthermore, a NMCTP@C//Sb@C full battery was fabricated, which delivered a high energy density of 421 Wh kg−1 and exhibited good cyclability with 75.7% capacity retention after 100 cycles. The rational design of composition regulation with multi-metal ion substitution holds the potential to unlock new possibilities in achieving high-performance SIBs.Graphical AbstractA novel NASICON-structured Na3.5MnCr0.5Ti0.5(PO4)3 nanofiber was successfully designed and prepared. This nanofiber was employed to research the multi-electron reaction and the resulting structural evolution in SIBs. The optimal Na-migration pathway has also been investigated by DFT computations. A full SIB battery was fabricated and delivered a high energy density (421 Wh kg−1) and cyclability (75.7% after 100 cycles at 100 mA g−1).

Mn3O4 Nanoparticles in Situ Embedded in TiO2 for High-Performance Na-ion Capacitor: Balance Between 3D Ordered Hierarchically Porous Structure and Heterostructured Interfaces

Confined Seeds Derived Sodium Titanate/graphene Composite with Synergistic Storage Ability Toward High Performance Sodium Ion Capacitors

Encapsulation of MnS Nanocrystals into N, S-Co-doped Carbon as Anode Material for Full Cell Sodium-Ion Capacitors

Ultrafine MoO2-Carbon Microstructures Enable Ultralong-Life Power-Type Sodium Ion Storage by Enhanced Pseudocapacitance

S/N Co-Doped Ultrathin TiO2 Nanoplates as an Anode Material for Advanced Sodium-Ion Hybrid Capacitors

2D heterostructural Mn 2 O 3 quantum dots embedded N-doped carbon nanosheets with strongly stable interface enabling high-performance sodium-ion hybrid capacitors

Sulfur covalently linked TiO2/C nanofiber as a high-capacity, ultrastable, and self-supported anode for sodium-ion capacitors

MXene Derived TiS2 Nanosheets for High-Rate and Long-Life Sodium-Ion Capacitors

Carbon-incorporated NaTi2(PO4)3 on carbon cloth as a binder-free anode material for high-performance aqueous sodium-ion hybrid capacitors

Sulfur-bridged bonds enabled structure modulation and space confinement of MnS for superior sodium-ion capacitors

Heterostructure engineering of MnO/TiO 2 embedded in N-doped hollow carbon nanofibers for superior sodium storage

Graphene wrapped TiO2@MoSe2 nano-microspheres with sandwich structure for high-performance sodium-ion hybrid capacitor

Fe 2 VO 4 Nanoparticles Anchored on Ordered Mesoporous Carbon with Pseudocapacitive Behaviors for Efficient Sodium Storage

Design of kinetic well-matched Mo2C nanoparticles anchored into 3D hierarchical porous carbon towards high-rate sodium ion storage

NASICON-structured Na3MnTi(PO4)2.83F0.5 cathode with high energy density and rate performance for sodium-ion batteries

Enhanced Ionic/Electronic Transport in Nano‐TiO2/Sheared CNT Composite Electrode for Na+ Insertion‐based Hybrid Ion‐Capacitors

Heterogeneous MoS2 Nanosheets on Porous TiO2 Nanofibers toward Fast and Reversible Sodium‐Ion Storage

A Novel NASICON-Type Na3.5MnCr0.5Ti0.5(PO4)3 Nanofiber with Multi-electron Reaction for High-Performance Sodium-Ion Batteries

Highly efficient sodium-ion capacitor enabled by mesoporous NaTi2(PO4)3/C anode and hydrogel-derived hierarchical porous activated carbon cathode

Sulfur‐Bridged Bonds Heightened Na‐Storage Properties in MnS Nanocubes Encapsulated by S‐Doped Carbon Matrix Synthesized via Solvent‐Free Tactics for High‐Performance Hybrid Sodium Ion Capacitors

Few-layered Ti<sub>3</sub>C<sub>2</sub> MXene anchoring bimetallic selenide NiCo<sub>2</sub>Se<sub>4</sub> nanoparticles for superior Sodium-ion batteries