Abstract:Thermal conductivity of soil is the key factor affecting utilization efficiency of ground source heat pumps (GSHPs). The microbially induced carbonate precipitation (MICP) technology has been proved to be an effective method to improve the thermal conductivity of soil. However, studies on using MICP treated soil as backfill to improve heat transfer performance of GSHP system is still rare. In this study, a small laboratory test device was developed to analyze the effects of different MICP treatment cycles on the heat transfer performance of GSHPs, taking into account four influencing factors: soil temperature, heat transfer and soil ultra-mild soil temperature recovery rate. The results show that MICP treated soil as backfill can improve heat transfer performance of GSHP to a certain extent, and the heat transfer amount in soil are 14.2 %, 34.9 % and 40.1 % corresponding to one to three MICP treatment cycles, which was higher than that of untreated soil. The longer the operation time, the more continuous heat dissipation or heat absorption of the system, the greater the heat transfer radius of the buried pipe temperature. For the influence of number of MICP treatment cycles, heat transfer effect of MICP-treated soil treated three times as backfill is the best. The temperature recovery rate of soil at the central test point of backfill area in summer is 73.15 %, followed by the temperature recovery rate of MICP-treated soil treated twice and treated once, which are 70.95 % and 69.6 % respectively. Considering heat transfer effect, treatment time and treatment cost, secondary MICP treated soil as backfill is the most cost-effective. Through scanning electron microscopy (SEM) image analyses, it is found that calcium carbonate acts as a "thermal bridge" between soil particles, increasing the contact surface between soil particles, resulting in improved heat transfer efficiency among soil particles, and thus improving the thermal conductivity of soil. The results provide good insight for the selection of GSHP layout, operation mode and environmental backfill in engineering practices.

Numerical Investigation on the Heat Storage/heat Release Performance Enhancement of Phase Change Cemented Paste Backfill Body with Using Casing-Type Heat Pipe Heat Exchangers

Experimental and Numerical Investigations of Heat Transfer and Phase Change Characteristics of Cemented Paste Backfill with PCM

Study on thermal performance of casing‐type mine heat recovery device with phase change materials filling in annular space

The Concept, Technical System and Heat Transfer Analysis on Phase-Change Heat Storage Backfill for Exploitation of Geothermal Energy

Numerical Investigation on Thermal Performance of Ground Heat Exchangers Using Phase Change Materials As Grout for Ground Source Heat Pump System

Development of a Phase Change Backfill Material with High Heat Capacity and High Thermal Conductivity Used for Ground Source Heat Pumps

Numerical and experimental studies on the cooling performance of backfill containing phase change materials

Experimental investigation on the thermal enhancement of spherical macro-encapsulated phase change material assisted soil heat accumulators

Numerical study on heat restoration cycle performance of energy pile with backfilling PCM

Performance Evaluation and Analysis of a Vertical Heat Pipe Latent Thermal Energy Storage System with Fins-Copper Foam Combination

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Numerical Analysis of Borehole Heat Exchanger Using a Single Shape-Stabilized Phase Change Material in Heating and Cooling Seasons

Experimental study on heat transfer and storage of a heating system coupled with solar flat heat pipe and phase change material unit

Numerical study on heat transfer enhancement of PCM using three combined methods based on heat pipe

Paraffin–CaCl2·6H2O dosage effects on the strength and heat transfer characteristics of cemented tailings backfill

Analysis of the Heat Transfer Performance of a Buried Pipe in the Heating Season Based on Field Testing

Experimental study on enhanced heat transfer mechanism of U-shaped buried pipe by bio-microbial method

Comparative study of novel backfill coupled heat exchangers using different waste materials in underground stopes

Experimental and numerical study on the cooling performance of heat pipe assisted composite phase change material-based battery thermal management system

Thermal performance and optimization of a casing pipe solar energy storage floor with phase change material

Experimental study on thermal response of a PCM energy pile in unsaturated clay