Abstract:Thermal risk analysis is essential for the development of chemical reactions. This work should be carried out on the basis of a thorough comprehension of the reaction mechanism. In this article, the synthesis process for 2,6-diaminopyrazine-1-oxide (DAPO), an important intermediate in the synthesis of the famous explosive 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105), was employed to show the importance of understanding the reaction mechanism for thermal risk analysis. First, we investigated the reaction mechanism of DAPO synthesis. The reaction mechanism was divided into two stages on the basis of the amount of triethylamine dosed: the first half of triethylamine dosing and the second half of triethylamine dosing until the end of the reaction. Then the thermal properties of DAPO synthesis and the thermal stability of the materials involved were experimentally studied using a reaction calorimeter (RC1) and a differential scanning calorimeter (DSC), respectively. The results show that the temperature corresponding to the maximum reaction rate reached in a time of 24 h under adiabatic conditions (TD24) is higher than the maximum temperature of the synthesis reaction (MTSR) for both of these stages, indicating that once cooling failure occurs, immediately stopping addition of triethylamine could prevent the occurrence of secondary decomposition.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.oprd.0c00529?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.oprd.0c00529</a>.Mass spectrum profiles for 2, calorimetry test result to measure the heat of mixing for trimethylamine and methanol, profiles of E and ln[f(α)Aα] versus α for samples 3 and 4, and HPLC profiles of side product 4 and the reaction filtrate obtained in run 2 (the product liquid after DAPO was filtered out) (<a class="ext-link" href="/doi/suppl/10.1021/acs.oprd.0c00529/suppl_file/op0c00529_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Thermal Runaway Inhibition of Adipic Acid Green Synthesis Based on a Radical Chain Reaction Mechanism

The Effects of Acid and Hydrogen Peroxide Stabilizer on the Thermal Hazard of Adipic Acid Green Synthesis

Effect of Stabilizer EDTA on the Thermal Hazard of Green Synthesis Process of Adipic Acid and Development of Microchannel Continuous Flow Process

Thermal hazard and reaction mechanism of the preparation of adipic acid through the oxidation with hydrogen peroxide

Process Hazard Evaluation and Thermal Runaway Prediction for Styrene Polymerization Initiated by Peroxide-Azo Composites

Thermal Risk Analysis Based on Reaction Mechanism: Application to the 2,6-Diaminopyrazine-1-oxide Synthesis Process

Runaway reaction investigation of di-tert-butyl peroxide using adiabatic calorimetry

Process Safety Evaluation of the Synthesis of Tert-Butyl Peracetate

Inhibition of exothermic runaway of batch reactors for the homogeneous esterification using nano-encapsulated phase change materials

Thermal hazard assessment for synthesis of 3-methylpyridine-N-oxide

Modeling of Runaway Inhibition in Batch Reactors Using Encapsulated Phase Change Materials

New Thermal Runaway Risk Assessment Methods for Two Step Synthesis Reactions

Thermal Risk in Batch Reactors: Case of Peracetic Acid Synthesis

Calorimetric evaluation of thermal stability and runaway hazard based on thermokinetic parameters of O,O–dimethyl phosphoramidothioate

Reaction mechanism and process safety assessment of acid-catalyzed synthesis of tert -butyl peracetate

Thermal Hazard Analysis of Inorganic Peroxide Initiators with Varying Water Concentrations

Process Safety Evaluation and Reaction Mechanism of Two Step Synthesis of Tert-Butyl Hydrogen Peroxide

Investigative calorimetric studies and kinetic parameters estimation using analytical methods for self-reactive hazardous chemicals in a chemical manufacturing plant

Thermal Runaway Inhibition of Styrene Polymerization Reaction by 4,6-Dinitro-o-sec-butylphenol (DNBP)

Atomic Insights into the Thermal Runaway Process of Hydrogen Peroxide and 1,3,5-Trimethybenzene Mixture: Combining ReaxFF MD and DFT Methods

Inherent safer design for chemical process of 1,4-dioldiacetate-2-butene oxidized by ozone