Abstract:In this paper,we would like to introduce our analysis results on the thermal haphazards likely to be caused with in the synthesis of benzoyl peroxide via the RC1e (Reaction Calorimeter).Benzoyl peroxide (BPO),historically speaking,has been known as a risk-prone chemical polymer that may lead to lots of serious fire and explosion accidents due to its broad use in the world.In order to prevent and reduce such accidents,the present author is inclined to propose the following aspects to make thorough research to work out more effective and long-range efficient way out to avoid such hateful and disastreous technical hardnuts.Therefore,we would like to recommend the following approaches at least as prewamings in this aspect.First of all,we do think it is of great significance to study the exothermic processes under different NaOH solutions to obtain the thermal hazard coefficients,which should be controlled at about the solution concentrations of 1.96 mol/L,3.93 mol/L,7.14 mol/L,respectively.And,secondly,more efforts should be oriented to the study of the thermal decomposition process of the aforementioned product by PHI-TEC Ⅱ to analyze its thermal stability.And,last of all,it is also necessary to evaluate the likeliness of the runaway reactions and the thermal risks of the synthetic process itself.In so doing,we would eventually bring forward the following suggestons:when the concentration reaches 7.14 mol/L,there will be great risk probability for the heat generation rate,that means,it would be the ending of the early stage in safety and beginning of the highest in the later stage for the risk.The adiabatic temperature rise (△Tad)and the maximum temperature of the synthesis reaction (MTSR) would like to reach the highest concentration.At this stage,the adiabatic temperature rise tends to prove to be 97.49 ℃,which should be attributed to the medium risk level.At this moment,the heat conversion would be fastest when the concentration comes to be 3.93 mol/L.And,then,it would be possible to make all the exothermic onset temperature,the activation energy,and the pre-exponential factor of the BPO product of RC1 e lower than the pure BPO,because it is very easy to decompose the BPO product of RC1e.Thus,as a result,we have worked out that the temperature for its decomposition should be at 49.81 ℃,when the time needed for the maximum reaction rate under the adiabatic condition of benzoyl peroxide is 24 h (TD24).Therefore,the evaluation results of the synthetic process demonstrate that the risks may remain too high to be accepted,which means that what we have concluded in this paper can not only help to improve the safety of BPO reaction and storage,but also provide technical supports for the originally settled stability criteria of the BPO decomposition reaction.

Thermal Risk Analysis Based on Reaction Mechanism: Application to the 2,6-Diaminopyrazine-1-oxide Synthesis Process

Analysis of Thermal Hazards of O,O-dimethylphosphoramidothioate by DSC, TG, VSP2, and GC/MS

Thermal Hazard Analyses for the Synthesis of Benzoyl Peroxide

Thermal hazard evaluation conjoined with product analysis of two water-soluble azo compounds

Thermal risk modeling and safety optimization of an arylamine diazo reaction based on PLS algorithm

Analysis of the thermal hazards likely to be caused by the synthesis of benzoyl peroxide

Thermal Runaway Inhibition of Adipic Acid Green Synthesis Based on a Radical Chain Reaction Mechanism

Calorimetric evaluation of thermal stability and runaway hazard based on thermokinetic parameters of O,O–dimethyl phosphoramidothioate

Thermal hazard assessment for synthesis of 3-methylpyridine-N-oxide

Study on the Thermal Safety of 3,7‐Dinitro‐1,3,5,7‐Tetraazabicyclo[3.3.1]nonane Synthesized by Nitrolysis of Hexamine

Evaluation of thermal hazards based on thermokinetic parameters of 2,4-dinitroanisole

Optimization and Thermal Risk Analysis of 3,4-bis(4-Aminofurazano-3-yl) Furoxan Synthesis Process Based on Reaction Mechanism

Process Safety Evaluation of the Synthesis of Tert-Butyl Peracetate

New Thermal Runaway Risk Assessment Methods for Two Step Synthesis Reactions

Thermal hazard and pyrolysis mechanism of tetrazolo[1,5-a]pyridine by TG, DSC, ARC, TG-MS and DFT methods

Inherently safer design for synthesis of 3‐methylpyridine‐N‐oxide

Investigative calorimetric studies and kinetic parameters estimation using analytical methods for self-reactive hazardous chemicals in a chemical manufacturing plant

Experimental and numerical simulation to identify the thermal hazards and hazardous scenarios of N-Nitrodihydroxyethyl dinitrate

Thermal Hazard Analysis of 1-((Cyano-1-methylethyl) Azo) Formamide and Effect of Incompatible Substances on Its Thermal Decomposition

Molecular simulation and experimental study on thermal decomposition of N , N ′-dinitrosopentamethylenetetramine

Thermal Hazard Analysis and Decomposition Mechanism of Energetic Nitration of 4-Methoxy-2-nitroacetanilide